• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.1-13
• /
• 2009

Filter cache has been introduced as one solution of reducing cache power consumption. More than 50% of the power reduction results from the filter cache, whereas more than 20% of the performance is compromised. To minimize the performance degradation of the filter cache, the predictive filter cache has been proposed. In this paper, we review the previous filter cache predictors and analyze the problems of the solutions. As a result, we found main problems that cause prediction misses in previous filter cache schemes and, to resolve the problems, this paper proposes a new prediction policy. In our scheme, some reference bit entries, called MSBs, are inserted into filter cache and BTB, to adaptively control the filter cache access. In simulation parts, we use a modified SimpleScalar simulator with MiBench benchmark programs to verify the proposed filter cache. The simulation result shows in average 5% performance improvement, compared to previous ones.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.11
• /
• pp.658-672
• /
• 2004

Multimedia applications are required to process the huge amount of data at high speed in real time. The memory reference instructions such as loads and stores are the main factor which limits the high speed execution of processor. To enhance the memory reference speed, cache prefetch schemes are used so as to reduce the cache miss ratio and the total execution time by previously fetching data into cache that is expected to be referenced in the future. In this study, we present an advanced data cache prefetching scheme that improves the conventional RPT (reference prediction table) based scheme. We considers the cache line size in calculation of the address stride referenced by the same instruction, and enhances the prefetching algorithm so that the effect of prefetching could be maintained even if an irregular address stride is inserted into the series of uniform strides. According to experiment results on multimedia benchmark programs, the cache miss ratio has been improved 29% in average compared to the conventional RPT scheme while the bus usage has increased relatively small amount (0.03%).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.1-8
• /
• 2019

Medical information is an important personal information for patients, and it must be protected. In particular, when medical personnel approach electronic medical records, authentication for enhanced security is essential. However, the existing public certificate-based certification model did not reflect the security characteristics of the electronic medical record(EMR) due to problems such as personal key management and authority delegation. In this study, we propose a fingerprint recognition-based authentication model with enhanced security to solve problems in the approach of the existing electronic medical record system. The proposed authentication model is an EMR system based on fingerprint recognition using PEMS (Private-key Escrow Management Server), which is applied with the private key commission protocol and the private key withdrawal protocol, enabling the problem of personal key management and authority delegation to be resolved at source. The performance experiment of the proposed certification model confirmed that the performance time was improved compared to the existing public certificate-based authentication, and the user's convenience was increased by recognizing fingerprints by replacing the electronic signature password.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.72-80
• /
• 2004

Electrolytic dissolution study was carried out to evaluate the applicability of electrochemical decontamination process using a neutral salt electrolyte as a decontamination technology for the recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds generated by dismantling a retired uranium conversion plant using SUS-304 and Inconel-600 specimen as the main materials of internal system components of the plant. The effects of type of neutral salt as an electrolyte, current density, and concentration of electrolyte on the dissolution of the materials were evaluated. On the basis of the results obtained through the basic inactive experiments, electrochemical decontamination tests using the specimens contaminated with uranium compounds such as $UO_2$, AUC (ammonium uranyl carbonate) and ADU (ammonium diuranate) taken from an uranium conversion plant were peformed in $Na_2SO_4$ and $NaNO_3$ solution. It was verified that the electrochemical decontamination of the dismantled metallic wastes was quite successful in $Na_2SO_4$ and $NaNO_3$ neutral salt electrolyte by reducing $\beta$ radioactivities below the level of self disposal with authorization within 10 minutes regardless of the type of contaminants and the degree of contamination.

• The Journal of Society for e-Business Studies
• /
• v.12 no.3
• /
• pp.211-234
• /
• 2007

In e-business, XML is a major format of data and it is essential to efficiently process queries against XML data. XML query caching has received much attention for query performance improvement. In employing XML query caching, some efficient technique of cache replacement is required. The previous techniques considered as a replacement unit either the whole query result or the path in the query result. The former is simple to employ but it is not efficient whereas the latter is more efficient and yet the size difference among the potential victims is large, and thus, efficiency of caching would be limited. In this paper, we propose a new technique where the element in the query result is are placement unit to overcome the limitations of the previous techniques. The proposed technique could enhance the cache efficiency to a great extent because it would not pick a victim whose size is too large to store a new cached item, the variance in the size of victims would be small, and the unused space of the cache storage would be small. A technique of XML semantic cache replacement is presented which is based on the replacement function that takes into account cache hit ratio, last access time, fetch time, size of XML semantic region, size of element in XML semantic region, etc. We implemented a prototype XML semantic cache system that employs the proposed technique, and conducted a detailed set of experiments over a LAN environment. The experimental results showed that our proposed technique outperformed the previous ones.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.1
• /
• pp.51-64
• /
• 1994

To compost the food garbage with the dry bean curd and sawdust as the bulking agents, the method of high-speed fermentation by the characteristic microorganisms group was applied. The results of experiments are summarized as follows ; 1. Korean food garbage, which is high in water content, is difficult to compost only by microorganism fermentation without the addition of bulking agents such as dry bean curd cake and sawdust. 2. Weight reduction rates are ranging from 35.6% to 64.5% and varying with the composition of food garbage. The less weight reduction rate is, the longer continuous-fermentation is. And the color of compost is changing sequentially as yellow -> brown -> black. 3. Comparing with the controlled microorganism group, the weight reduction rate and $H_2CO_3$ production rate in the characteristic microorganism group fermentation reactors are higher. And the fermentation rate is satisfactory when the characteristic microorganism group is added. 4. The value of fermented composting as fertilizer diminishes, and the contents of Total Nitrogen, $P_2O_5$, $K_2O$ increase on the condition that the fermentation continues. However, the organic contents and C/N ratio diminish as the fermentation continues. 5. The high-speed fermentation technology demonstractes the possibility of recycling as well as the reduction of composting time provided that it is applied as a pretreatment process for composting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2689-2696
• /
• 2015

Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.37-81
• /
• 2015

AirAsia QZ8501 Jet departed from Juanda International Airport in, Surabaya, Indonesia at 05:35 on Dec. 28, 2014 and was scheduled to arrive at Changi International Airport in Singapore at 08:30 the same day. The aircraft, an Airbus A320-200 crashed into the Java Sea on Dec. 28, 2014 carrying 162 passengers and crew off the coast of Indonesia's second largest city Surabaya on its way to Singapore. Indonesia's AirAsia jet carrying 162 people lost contact with ground control on Dec. 28, 2014. The aircraft's debris was found about 66 miles from the plane's last detected position. The 155 passengers and seven crew members aboard Flight QZ 8501, which vanished from radar 42 minutes after having departed Indonesia's second largest city of Surabaya bound for Singapore early Dec. 28, 2014. AirAsia QZ8501 had on board 137 adult passengers, 17 children and one infant, along with two pilots and five crew members in the aircraft, a majority of them Indonesian nationals. On board Flight QZ8501 were 155 Indonesian, three South Koreans, and one person each from Singapore, Malaysia and the UK. The Malaysia Airlines Flight 370 departed from Kuala Lumpur International Airport on March 8, 2014 at 00:41 local time and was scheduled to land at Beijing's Capital International Airport at 06:30 local time. Malaysia Airlines also marketed as China Southern Airlines Flight 748 (CZ748) through a code-share agreement, was a scheduled international passenger flight that disappeared on 8 March 2014 en route from Kuala Lumpur International Airport to Beijing's Capital International Airport (a distance of 2,743 miles: 4,414 km). The aircraft, a Boeing 777-200ER, last made contact with air traffic control less than an hour after takeoff. Operated by Malaysia Airlines (MAS), the aircraft carried 12 crew members and 227 passengers from 15 nations. There were 227 passengers, including 153 Chinese and 38 Malaysians, according to records. Nearly two-thirds of the passengers on Flight 370 were from China. On April 5, 2014 what could be the wreckage of the ill-fated Malaysia Airlines was found. What appeared to be the remnants of flight MH370 have been spotted drifting in a remote section of the Indian Ocean. Compensation for loss of life is vastly different between US. passengers and non-U.S. passengers. "If the claim is brought in the US. court, it's of significantly more value than if it's brought into any other court." Some victims and survivors of the Indonesian and Malaysia airline's air crash case would like to sue the lawsuit to the United States court in order to receive a larger compensation package for damage caused by an accident that occurred in the sea of Java sea and the Indian ocean and rather than taking it to the Indonesian or Malaysian court. Though each victim and survivor of the Indonesian and Malaysia airline's air crash case will receive an unconditional 113,100 Unit of Account (SDR) as an amount of compensation for damage from Indonesia's AirAsia and Malaysia Airlines in accordance with Article 21, 1 (absolute, strict, no-fault liability system) of the 1999 Montreal Convention. But if Indonesia AirAsia airlines and Malaysia Airlines cannot prove as to the following two points without fault based on Article 21, 2 (presumed faulty system) of the 1999 Montreal Convention, AirAsia of Indonesiaand Malaysia Airlines will be burdened the unlimited liability to the each victim and survivor of the Indonesian and Malaysia airline's air crash case such as (1) such damage was not due to the negligence or other wrongful act or omission of the air carrier or its servants or agents, or (2) such damage was solely due to the negligence or other wrongful act or omission of a third party. In this researcher's view for the aforementioned reasons, and under the laws of China, Indonesia, Malaysia and Korea the Chinese, Indonesian, Malaysia and Korean, some victims and survivors of the crash of the two flights are entitled to receive possibly from more than 113,100 SDR to 5 million US$ from the two airlines or from the Aviation Insurance Company based on decision of the American court. It could also be argued that it is reasonable and necessary to revise the clause referring to bodily injury to a clause mentioning personal injury based on Article 17 of the 1999 Montreal Convention so as to be included the mental injury and condolence in the near future.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.11-23
• /
• 2003

A study on the electrolytic dissolution of SUS-304 and Inconel-600 specimen was carried out in neutral salt electrolyte to evaluate the applicability of electrochemical decontamination process for recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds generated by dismantling a retired uranium conversion plant in Korea. Although the best electrolytic dissolution performance for the specimens was observed in a Na2s04 electrolyte, a NaNO$_3$ neutral salt electrolyte, in which about 30% for SUS-304 and the same for Inconel-600 in the weight loss was shown in comparison with that in a Na$_2$SO$_4$ solution, was selected as an electrolyte for the electrochemical decontamination of metallic wastes with the consideration on the surface of system components contacted with nitric acid and the compatibility with lagoon wastes generated during the facility operation. The effects of current density, electrolytic dissolution time, and concentration of NaNO$_3$ on the electrolytic dissolution of the specimens were investigated. On the basis of the results obtained through the basic inactive experiments, electrochemical decontamination tests using the specimens contaminated with uranium compounds such as UO$_2$, AUC (ammonium uranyl carbonate) and ADU (ammonium diuranate) taken from an uranium conversion facility were performed in 1M NaNO$_3$ solution with the current density or In mA/$\textrm{cm}^2$. it was verified that the electrochemical decontamination of the metallic wastes contaminated uranium compounds was quite successful in a NaNO$_3$ neutral salt electrolyte by reducing $\alpha$ and $\beta$ radioactivities below the level of self disposal within 10 minutes regardless of the type of contaminants and the degree of contamination.