• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.453-458
• /
• 2003

Usually Mylar strip and wedge or celluloid strip crown were used in conventional method of restoring proximal carious lesions of primary anterior teeth. But, these methods have some difficulties to place the matrix and wedge due to short crown lenth and interdental spacing of primary teeth. And it is difficult to form proper cavosurface margin due to the rigidity of matrix and inconvenience to support matrix by practitioner's hand in narrow oral cavity of child. This article describes an alternative technique for restoring carious lesions of primary anterior teeth using available straw. This method is very convenient and reduce chair time and it also allows good marginal adaptation.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.1
• /
• pp.31-35
• /
• 1994

전남대학교 치과진료처에 내원한 환자의 구내방사선사진중 1단계 (Cl: 30개 병소)또는 2단계(C2: 213.8병소)의 인접면 치아우식을 가진 방사선사진 168장을 연구대상으로 하였다. 이들 방사선사진은 코닥사의 Ektaspeed(E group) 필름을 사용하여 평행촬영법으로 촬영하였다. 168장의 방사선사진에 대하여 1단계 및 2단계 치아우식증을 4명의 구강악안면방사선학을 전공한 치과의사들이 같이 판독하여 그 결과를 기록하였다. 또한 168장의 방사선사진을 필름-비디오 변환장치를 이용하여 디지털 영상으로 전환하였다. 이때 486 DX PC에 PCVision과 frame grabber를 이용하였다. 각각의 구내방사선사 진영상은 17"크기의 1280×768픽셀의 해상도를 갖는 모니터상에서 256단계 흑화도를 갖는 700×480픽셀로 제시되었다. 모니터상에서의 치아우식 판독 결과를 구내방사선사진 판독 결과와 비교하였다. 그 결과 sensitivity는 0.98이었다. 1단계 치아우식은 0.87, 2단계 치아우식 은 1.00의 sensitivity를 나타내었다.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.573-576
• /
• 2008

절토사면 및 천심도 터널의 경우 불연속면을 따른 블록의 미끄러짐 및 회전 등이 안정성에 큰 영향을 미친다. 국도나 지방도 등을 확장 공사함에 따라 산악이 많은 우리나라 지형의 특성상 절토사면이 많이 발생하게 되고, 경우에 따라서는 이러한 절토사면에 터널이 위치하게 된다. 이런 상황의 터널갱구부 및 인접한 절토사면부에서 붕괴 및 균열이 빈번하게 발생되고 있다. 본 연구에서는 대절토사면과 인접한 터널갱구부에 대하여 편토압이 균열의 주원인인지를 결정하기 위하여 변위 및 응력 패턴을 분석한 사례연구를 제시하였다. 조사대상지역은 울진군에 위치한 터널굴진 현장이고, 붕괴는 터널갱구부와 인접한 절토사면부에서 발생하였으며 터널갱구부 상단의 숏크리트 타설지역에서 다수의 균열이 관찰되었다. 언급한 터널갱구부의 변위 및 응력패턴을 모사하기 위하여 유한차분법에 근거한 플랙을 사용하였으며, 세밀한 수치해석을 위해 편재절리모델을 도입하였다. 마지막으로, 터널갱구부의 균열에 영향을 미친 주원인에 대한 고찰을 다루었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.324-330
• /
• 2014

In case of implant-tooth connected prosthesis, a natural tooth tends to intrude. There are several mechanisms that explain an intrusion phenomenon. So it is reco mmended not to connect an implant with a natural tooth. A 68-year-old female had upper left $2^{nd}$ premolar and $2^{nd}$ molar extracted and underwent implant surgery on the missing area. We made an implant prosthesis and treated upper left $1^{st}$ molar with a gold crown. 2.5 year later, the patient complained about loose proximal contact and food impaction between upper left $1^{st}$ molar and $2^{nd}$ molar. Mesial side of upper left $2^{nd}$ molar implant prosthesis was soldered so that proximal contact became tight again. But after 7 months, about 2 mm intrusion of upper left $1^{st}$ molar occurred, and the patient felt periodontally originated pain on intruded upper left $1^{st}$ molar. After the gold crown on upper left $1^{st}$ molar was removed, extrusion occurred and pain was relived.

• The Journal of the Korean dental association
• /
• v.42 no.9 s.424
• /
• pp.632-637
• /
• 2004

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.153-158
• /
• 2004

Preformed stainless steel crown is an useful restorative material for the treatment of badly broken down primary teeth. However iatrogenic damage to adjacent teeth might occur during the process of tooth reduction. Such damages might lead to plaque accumulation and increase the risks of caries initiation. Especially the damage can make a problem in the first permanent molar. Purpose of this study was to investigate an iatrogenic damage to the first permanent molar during preparation of second primary molar for preformed stainless steel crown. Twelve children restored with preformed stainless steel crown to second primary molar were selected. Contact areas were separated with separation elastics, and tooth surfaces were cleaned. After taking negative impression using vinylpolysiloxane impression material, the specimens were examined by scanning electron microscope for the detection of iatrogenic damage. The prevalence of iatrogenic damage was 66.7% and variable appearances and So we can suggest that when preparing teeth for preformed stainless steel crown, we should be careful about adjacent teeth not to make an iatrogenic damage.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.1
• /
• pp.12-20
• /
• 2021

The purpose of this retrospective study was to evaluate the survival rate by comparing Class II restoration using flowable resin composite with stainless steel crown in primary molars. Electronic medical records and radiographs of 1,504 primary molars with proximal caries of 590 patients from June 2015 to August 2019 were analyzed. With the collected data, survival analysis was performed using the Kaplan-Meier method. The 1-year survival rate of flowable resin composite in the primary molar was 98.5%, 3-year survival rate was 87.7%, and mean survival time was 39 months. There was no statistically significant difference between flowable resin composite and stainless steel crown (p = 0.896). Within the limits of this study, Class II restoration using flowable resin composite can be considered a promising option for the treatment of proximal caries in primary molars.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.47-53
• /
• 2024

Interproximal contact loss (ICL) is the most frequent complication in partially edentulous patients treated with implant-supported prostheses. However, in most cases, ICL occurs between the implant prosthesis and the natural tooth due to the movement of the natural tooth. There are several causes of ICL that occur between an implant prosthesis and a natural tooth. There are only a few reported cases of ICL occurring between implant prostheses, and explaining the causes of ICL between implant prostheses and natural teeth is challenging. This clinical report describes cases of ICL between implant prostheses and discusses its causes and countermeasures.

• Journal of the Korean Society of Radiology
• /
• v.18 no.5
• /
• pp.483-490
• /
• 2024

Existing Intra-oral radiography examinations have problems with information on the angle of incidence used in textbook and those used in the field, and radiologic examinations result vary depending on the operator's skill. Therefore, this study aimed to suggest an ideal angle of incidence for radiological examination so that the proximal areas between teeth are clearly visible without overlapping. First, patient's dental arch in the exact center, and the angle of incidence of the point where the teeth did not overlap was measured using a protractor tool in program. Second, based on the calculated results, we surveyed patient phantoms for student practice during Intra-oral radiography examination and conducted a survey based on qualitative evaluation using a 5-point Likert scale.When comparing the average value obtained by measuring actual patient data and the angle specified in the existing reference book, there is a statistically significant difference in the average between the two groups at p < 0.05 in the proximal area of all teeth, and even if the gender and age group are different, there is a significant difference. Because it did not deviate from the scope, we were able to obtain results that could be sufficiently presented as guidelines. In addition, in a qualitative evaluation based on the images presented by applying the actual measured data to the phantom, images were obtained in which the adjacent surfaces of teeth do not overlap. In conclusion, this study proposes guidelines for the angle of incidence during Intra-Oral Radiography examination to reduce cone-cut images or images with overlapping proximal area and prevent repeat.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.742-744
• /
• 2005

본 논문에서는 인접 블록의 움직임 벡터를 이용한 움직임 예측 알고리즘을 제안하였다. 제안된 알고리즘은 두개의 탐색 단계로 구성된다. 첫 번째 단계는 인접 블록의 움직임 벡터를 이용한 탐색점에서 오차값이 제일 작은 위치를 초기 시작 위치로 사용하였다. 두 번째 단계는 첫 번째 단계에서 찾은 시작 위치에서 정확한 움직임 예측을 위한 패턴과 방법을 적용 하였다. 제안된 알고리즘은 움직임 벡터가 클 경우에 불필요한 탐색점 개수를 줄이고, 성능저하의 원인인 지역적 최소값(local minimum)에 빠질 위험을 감소시켰다. 제안된 알고리즘은 NTSS, 4SS, IDFS, ARPS와 비교 했으며, 성능면에서는 평균 PSNR이 $0.27\~2.56dB$향상되었고, 탐색점 개수면에서는 평균 27개 감소 하였다.