• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.53-59
• /
• 2006

.FAPO-5 molecular sieves were synthesized starting from the same reactant gel at 170 oC using microwave irradiation technique and conventional hydrothermal reaction. The FAPO-5 molecular sieves were characterized by several techniques such as SEM, FTIR, UV/Vis, and ESR. Moreover, the oxidation of styrene over FAPO-5s was carried out, and compared to check the oxidation and epoxidation ability of the two FAPO-5s. FAPO-5 can be obtained easily by microwave irradiation within 15 min at 170oC, whereas FAPO-5 synthesis is completed in 6 h by conventional electric heating, confirming the acceleration about 20 times by microwave technique. There are no appreciable differences between two FAPO-5s in surface area and coordination state of iron. The FAPO-5 synthesized by microwave irradiation shows higher epoxide selectivity in the styrene epoxidation, which may be explained by the higher hydrophobicity of the catalyst.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.150-152
• /
• 2009

본 연구는 염료감응형 태양전지에 적용되는 TiO2 나노입자를 개선하여 3차원적인 nanobranch를 수열법으로 합성하여 전자의 이동을 향상시키며, 비표면적을 늘려 효율향상을 위하여 전극 구조를 제어하였다. nanobranch의 seed인 nanowire를 XRDd, FE-TEM과 solar simulator를 이용하여 비교 분석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.707-714
• /
• 2010

Since an LFSR(linear feedback shift register) as a pattern generator has solely linear dependency in itself, it generates sequences by moving the bit positions for pattern generation. So the correlation between the generated patterns is high and thus reduces the possibility of fault detection. To overcome these problems many researchers studied to have goodness of randomness between the output test patterns. In this paper, we propose the new and effective method to construct phase shifter as PRPG(pseudo random pattern generator).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.241-245
• /
• 2013

Granular bamboo-derived active carbons (AC) were impregnated (or coated) with $TiO_2$ nano crystalline powders. The photocatalytic activity of the $TiO_2$-impregnated active carbons ($TiO_2$/AC) were determined on the basis of the degradation rate of methylene-blue aqueous solution under UV irradiation. The active compounds of $TiO_2$ were impregnated onto the AC under moderate hydrothermal conditions (${\leq}200^{\circ}C$, pH 11). The mean size of $TiO_2$ particles calculated from BET surface area were found to be as 50 nm. The $TiO_2$ precipitates were coated on the cavities or pores on the surfaces of highly activated carbons. Since the hydrothermal process led to a lowering of the on-set temperature of the anatase-to-rutile transition of $TiO_2$ as low as $200^{\circ}C$, $TiO_2$ crystallites of a pure anatase or a mixed form with rutile were successfully coated on the AC depending on the synthesis temperatures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.635-639
• /
• 2009

In this paper, we show that any two Hadamard matrices of the same size are equivalent if they have the property that the rows of each Hadamard matrix are closed under binary vector addition. One of direct consequences of this result is that the equivalence between cyclic Hadamard matrices constructed by maximal length sequences and Walsh-Hadamard matrix of the same size generated by Kronecker product can be established.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.10a
• /
• pp.55-61
• /
• 1998

본 논문에서는 비밀성 메커니즘의 암호학적인 안전성에 대한 체계적인 분석을 통하여 난수열의 각종 암호학적, 통계적 성질에 기반한 평가 기법을 소개하고 이를 패키지로써 구현하였다. 본 패키지는 기존의 알려진 통계적 검정 기법들 뿐만 아니라 다양한 암호학적 특성에 기반한 검정 기법들을 종합적으로 분석하여 구현함으로써 차후 개발이 예상되는 새로운 스트림 및 블록 암호 알고리즘의 설계와 안전성 평가에 유용하게 적용될 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1737-1740
• /
• 2005

MP3 음악과 같은 오디오 컨텐츠의 저작권 보호를 위한 다양한 오디오 워터마킹 기법이 활발히 연구되고 있다. 본 논문에서는 XUEYAO LI[1]가 제안한 방법을 기반으로 VLSI H/W구조를 제안하며 이를 Verilog HDL을 이용하여 설계 및 시뮬레이션을 수행하였다. 본 논문에서 사용한 워터마크 삽입 기법은 시각적 식별성이 뛰어난 이진 이미지를 기반으로 의사 랜덤 수열을 생성하여 웨이브릿 영역에서의 워터마크를 삽입하는 기법이다. H/W 설계의 복잡성을 줄이기 위해 워터마크 삽입 강도를 스케일링 하는 기법을 생략하였으나 Matlab을 이용한 알고리즘 시뮬레이션 결과 워터마크 삽입 신호의 음질에 거의 영향을 주지 않으며 몇몇 알려진 워터마크 공격에도 강인성을 보였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.1
• /
• pp.15-32
• /
• 1997

본 논문에서는 스트림 암호 시스템에서 사용이 되는 LFSR 을 이용한 이진 수열 발생기중 하나인 Threshold 발생기에 대한 광학적 구현 방법을 새로이 제안하였다. 광학적 구현을 위하여 LCD를 이용하므로서 LFSR 및 Mod 덧셈 연산을 위한 각 비트 값을 표현, 2차원 처리가 가능하게 하였다. Thredshold 발생기의 LFSR기능은 Shdow Casting 기법을 이용하여, 또한 XOR 연산 및 내적 계산을 위한 MOD덧셈 연산은 LCD 가 갖고 있는 편광 특성을 이용하여 광학적으로 구현하였다. 특히 본 논문에서는 Mod 2 덧셈 연산을 위한 새로운 광학적 구현 방법인 RSPM 을 제안하므로서 연산 결과 값 측정과 LCD 상의 데이타 값 표현 과정을 제외한 전 부분을 완전한 광학적 방법으로 처리가 가능하게 하였다. 본 논문에서 제안한 광 Threshold 암호 시스템은 기존의 전자적인 H/W 구현 방법에서 문제가 되어오던 Tapping Point의 개수에 대한 한계성을 극복할 수 있는 장점을 지니고 있으며, 또한 2차원 데이타인 영상용 암호화 시스템의 광학적 구현에 그 응용이 가능하다.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.817-821
• /
• 1998

$BaTiO_3$ particles were prepared using $Ba(OH)_2{\cdot}8H_2O$ and $Ti(OC_2H_5)O_4$ by the hydrothermal method and their characteristics treated at the various temperatures have been investigated. This prepared $BaTiO_3$ powder includes a very small amount of $H_2O$ and $OH^-$. By increasing the treated temperature from $200^{\circ}C$ to $1000^{\circ}C$, the mean particle size was accordingly increased from $0.022{\mu}m$ to $0.072{\mu}m$ and the tetrogonality(c/a)was increased from 1.02 to 1.2 so that the phase transition to tetroganal takes place. $BaTiO_3$ sintered at $1250^{\circ}C$ after heat treatment at $400^{\circ}C$ for 3 hrs showed a specific dielectric constant of 8120 and surface activation energy was 9680 kcal/mol.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.393-401
• /
• 2012

Inorganic pigment is excellent at stability to human body and compatibility with different materials and has been used in a variety of field such as cosmetics, printing inks, paints, and construction materials for improving the aesthetic features. In this paper, hydrothermal synthesis method was used to prepare the manganese and iron dopped with titania pigment. As process parameters, the amount of manganese precursor and iron precursor, and calcined temperature was changed. Optimum amounts of manganese and iron dopped with titania precursor to give excellent color index was manganese 1.0wt% and iron 1.5wt% for dopped titania, and Optimum calcination temperature was $550^{\circ}C$. The synthesized pigments were analyzed by XRD, SEM, EDS, Spectrophotometer and UV-Vis Spectrometer.