• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.254-259
• /
• 2011

In electrospraying of polymer solutions, metal sample collectors are often ineffective in fully removing solvent from sprayed particles and recovering redispersable sprayed particles. Herein, a novel electro spraying system, where sprayed particles were dispersed into laminar flow of dispersant (coagulation liquid), was designed for the nano-encapsulation of protein drugs. Chitosan and polyacrylic acid were used as the encapsulation materials. Aggregation of particles could be prevented by using this new electrospraying system, and unimodal size distribution was observed at an applied voltage between 4~16 kV and a low flow rate. The effects of the applied voltage on mean particle size were not significant on the other hand.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1522-1527
• /
• 2004

The purpose of this study is to investigate the effect of swirler angle and swirl chamber aspect ration of nozzle on the characteristics of single and twin spray. The performances of nozzle has been investigated by measurements of spray angle, droplet size, velocity and Weber number at a water pressure 0.4MHz. Visualization of spray was conducted to obtain the spray angle and breakup process. The spray characteristics such as droplet size and velocity were measured by Phase Doppler Anemometry(PDA). It was found that the smaller swirler angle, the larger axial velocity became. It was also shown that the larger aspect ratio, the smaller droplet diameter became.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.6-7
• /
• 2002

동축형 인젝터는 이미 여러 발사체에서 널리 쓰이고 있는 인젝터의 한 형태로서 또 다른 인젝터 방식인 충돌형과 비교하여 구조가 복잡한 단점이 있는 반면에 연소 현상의 불안정성에 대해 덜 민감하며 미립화와 혼합의 특성도 우수하다. 이런 동축형 인젝터는 크게 스월 방식과 shear 방식으로 나누어진다. 이중에서 스월 인젝터는 산화제와 연료의 유입구에 접선 방향의 속도를 줌으로써 conical sheet 형태의 분무장을 형성하여 미립화와 혼합을 꾀하는 방식이다. 이와 같은 스월 인젝터에서 중요한 변수 중에 하나인 recess의 변화에 대해 분무 형상과 미립화 혼합특성까지 파악해보았다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.80.1-80.1
• /
• 2007

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.31-39
• /
• 1999

In this paper, numerical experiment is attempted to analyze and compare the combustion efficiency of the burning sprays due to OFO, FOF triplet / FOOF split doublet injectors. Preconditioned Wavier-Stokes equation system with low Reynolds number $\kappa$-$\varepsilon$ model for turbulence closure, is LU-SGS time-integrated. Spray processes are modeled by DSF analysis with experimentally determined injection characteristics. n-heptane/air global reaction model approximates the combustion for simplicity, and the influence of turbulence on the chemical reaction is included using eddy dissipation model. The results showed the FOF triplet injector of highest combustion efficiency, whereas the OFO type of poet performance. It was also observed that the droplet mean diameter and the average gas temperature due to the mixing efficiency, are the representative parameters for the performance design of combustion.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.244-250
• /
• 2003

국내에 보급된 방제기는 인력분무기, 동력 분무기, 동력 살분무기, 스피드 스프레이어, 붐방제기 등이 있다. 그 중 동력경운기에 탑재하거나 트랙터에 견인되는 동력분무기를 주축으로 기계화되어 있다. 작은 입경의 분무입자로서 가급적 적정량을 균일하게 뿌릴 때 방제효율을 높일 수 있는데도 불구하고, 동력분무기에 의한 액제 살포는 원거리 살포에 따라 분무입자의 입경 분포가 다양하며 대부분 분무입자가 매우 크므로 고른 살포를 기대하기 어렵기 때문에 약액을 1000대 1로 희석하여 흠뻑 적실 정도로 다량 살포를 하여 살포효율을 높이고 있다. 그러나 이러한 방제 방법은 효율성, 작업능률과 환경의 오염 측면에서 상당한 문제로 지적되고 있다. (중략)

• Journal of ILASS-Korea
• /
• v.2 no.4
• /
• pp.22-28
• /
• 1997

In this paper an experimental study of a spray created by two impinging jets is presented utilizing a novel two-reference-beam double-pulse holographic technique. Visualization of the overall spray pattern as well as measurements on the size and velocity of the droplets were performed with the special emphasis on the effect of physical properties of liquids. The overall spray pattern clearly revealed the inherent wave nature In the disintegration process of this type of atomization. The structure of liquid elements near the impingement point is indicative of the mechanisms of the disintegration process. Surface tension plays an important role in the droplet size without any noticeable effect on the spray pattern, whereas viscosity affects the structure without any significant effect on the droplet sire. The droplet velocities were not affected by liquid properties.

• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2000

In precision chemical application increment of biological efficacy with less chemical is the virtue. spraying rate and droplet size is closely related to biological efficacy. this study was performed to develope a spray-control-system that could control spraying rate and droplet size independently. Twin-fluid nozzles were selected and tested to certify if the nozzles were suitable for the objective of this study. Characteritics of the nozzles i.e., spraying rte and droplet size change u8nder the changes of spraying pressure and air pressure were statistically modeled. The model had I to 1 matching property between dependent variables and independent variables. Using the property and the model, inverse relationship could be determined between variables. A feedback spray control system was developed and tested with predetermined error of 5 % in pressure. The system showed 4 % error in spraying rate and 9 % error in droplets size. Performance of the system could be upgraded by fine tuning but, in practical sense keeping air pressure in the field sprayer was the bottle neck of commercialization of the spray system.

• Journal of ILASS-Korea
• /
• v.3 no.4
• /
• pp.16-24
• /
• 1998

The fuel injection type, in the gasoline engines of atomization of fuel droplet and its distribution hae influenced directly on the decision of engine performance and harmful emission. In this paper, atomization characteristics of fuel spray is investigated with microscopic visualization system. Particle motion analysis system is used to measure the SMD from fuel spray of air-assisted injector by initial factors such as temperature of ambient air and air-assisted pressure. As air-assist pressure and ambientair temperature increase, the SMD is decreased, and its variation is more stable.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.3
• /
• pp.23-46
• /
• 1999

LC/MS는 HPLC의 분리능과 질량분석기의 화합물의 확인 능력을 결합시킨 기기이다. 여기서 사용되는 이온화 방법은 GCJMS에서 사용되어지는 전자이온화법(electron ionization, EI)이나, 화학이온화법(chemical ionization, CI)은 부적당하기 때문에 최근 개발되어진 연성 이온화법의 대표적인 고속원자폭격식(Fast atom bombardment, FAB)이나 전기분무이온화식 (electrospray ionization, ESI) 등이 사용되고 있다. 이중 전기분무이온화법은 고속원자폭격법에서 사용되는 매트릭스를 사용하지 않기 때문에 매트릭스 이온의 부재로 인한 낮은 바탕 신호, 오래 지속되면서 안정된 초기 이온 전류, 샘플링의 용이성, HPLC와의 더 좋은 호환성 등의 장점을 제공한다. 이러한 전기분무이온화 방법은 극성이 매우 크거나 휘발성이 낮은 물질로 보통의 EI나 CI 이온화 방법으로 분석이 어려운 물질들을 분석할 수 있다. 또한 열에 불안정하거나 분자의 분자량이 다른 단백질 등의 분석도 가능하다. 이러한 LC/ESI/MS 방법을 이용하여 열에 불안정하고 극성이면서 분자량이 커서 GC/MS 펄의 분석이 어려운 기능성 화장품 원료로 주목받고 있고 생체에 존재하는 지질 성분으로 알려진 레시틴과 세라마이드의 분석이 가능함을 소개하고 분리와 동시에 그 분자량과 구조에 대한 정보를 빠르게 얻을 수 있음을 소개하였다.