• 제목/요약/키워드: 이중 분무

검색결과 99건 처리시간 0.035초

고분자 용액의 동축 이중노즐 전기분무: 분산제 흐름의 사용 (Coaxial Nozzle Electrospraying of Polymer Solutions: Use of Dispersant Flow)

  • 김민영;이종휘
    • 폴리머
    • /
    • 제35권3호
    • /
    • pp.254-259
    • /
    • 2011
  • 고분자 용액의 전기분무에서 금속 샘플 포집기들은 분무된 입자로부터 흔히 용매를 충분히 제거하거나 재분산이 가능한 분무 입자를 회수하는데 효과적이지 못하다. 단백질 약물의 캡슐화(encapsulation)를 위해 본 연구에서는 입자를 분산매(응고액제)의 층류 안으로 분무하는 새로운 전기분무시스템을 설계하였다. 캡슐화용 물질로 키토산과 폴리아크릴산이 사용되었다. 이 새로운 시스템을 사용하여 입자의 응집을 방지할 수 있었으며, 4~16 kV의 전압과 같은 유속에서 unimodal한 입도분포를 관찰할 수 있었다. 반면에 가한 전압이 평균 입자 크기에 미치는 영향은 크지 않았다.

노즐이 내부형상이 이중분무의 유속과 입경에 미치는 영향 (Effect of Internal Geometry of Nozzle on the Velocity and Droplet Size of Twin Spray)

  • 김영진;정지원;김덕줄
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1522-1527
    • /
    • 2004
  • The purpose of this study is to investigate the effect of swirler angle and swirl chamber aspect ration of nozzle on the characteristics of single and twin spray. The performances of nozzle has been investigated by measurements of spray angle, droplet size, velocity and Weber number at a water pressure 0.4MHz. Visualization of spray was conducted to obtain the spray angle and breakup process. The spray characteristics such as droplet size and velocity were measured by Phase Doppler Anemometry(PDA). It was found that the smaller swirler angle, the larger axial velocity became. It was also shown that the larger aspect ratio, the smaller droplet diameter became.

  • PDF

스월 인젝터의 Recess변화가 미립화에 미치는 영향

  • 설재훈;한풍규;황성하;윤영빈
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
    • /
    • pp.6-7
    • /
    • 2002
  • 동축형 인젝터는 이미 여러 발사체에서 널리 쓰이고 있는 인젝터의 한 형태로서 또 다른 인젝터 방식인 충돌형과 비교하여 구조가 복잡한 단점이 있는 반면에 연소 현상의 불안정성에 대해 덜 민감하며 미립화와 혼합의 특성도 우수하다. 이런 동축형 인젝터는 크게 스월 방식과 shear 방식으로 나누어진다. 이중에서 스월 인젝터는 산화제와 연료의 유입구에 접선 방향의 속도를 줌으로써 conical sheet 형태의 분무장을 형성하여 미립화와 혼합을 꾀하는 방식이다. 이와 같은 스월 인젝터에서 중요한 변수 중에 하나인 recess의 변화에 대해 분무 형상과 미립화 혼합특성까지 파악해보았다.

  • PDF

3차원 분무연소장 해석에 의한 액체추진기관 연소실 성능예측에 대한 연구 (Analysis of Spray Combustion for the Performance Prediction of Liquid Rocket Combustor)

  • 황용석;윤웅섭
    • 한국추진공학회지
    • /
    • 제3권3호
    • /
    • pp.31-39
    • /
    • 1999
  • OFO, FOF 삼중 충돌형 및 FOOF 이중 분리 충돌형 분무연소장의 3차원 수치해석을 통한 연소성능 예측 및 성능설계 방법에 대하여 고찰하였다. 예조건화 압축성 유동 지배방정식과 저 레이놀즈수 $\kappa$-$\varepsilon$ 2 방정식 난류모델을 바탕으로 LU-SGS 기법을 사용하여 시간적분 하였으며 분무과정은 DSF 방법을 사용하여 모사하였다. n-heptane 액적과 공기를 연료와 산화제로 하는 액체 추진기관 내에서의 분무 연소장을 계산하였으며 연소에서의 난류의 영향은 eddy 소산모델을 사용하여 모사하였다. 분무연소장의 특성과 연소성능이 비교되었으며, 계산 결과 FOF 삼중 충돌형 분사기의 성능이 가장 우수한 반면, OFO 삼중 충돌형 분사기의 성능이 가장 저조한 것으로 나타났다. 연소효율에 중대한 영향을 미치는 파라미터로는 운동량비에 따른 초기 분무 액적의 평균직경과 혼합효율임을 확인하였다. 연소효율은 초기 분무 액적의 평균직경과 반비례, 혼합효율에 비례하여 증가되며, 산화제/연료 혼합비도 비례하여 상승하나, 일정 운동량비 이상에서는 감소되는 것으로 나타났다. 각 분사기 형태에서 운동량비에 따른 연소효율의 변화는 혼합효율의 변화와 동일한 경향을 보이며 그 크기는 분무 액적의 평균직경에 밀접한 관계가 있음을 알 수 있었다.

  • PDF

주파수 분석을 이용한 전작용 붐방제기의 진동 특성 분석 (Vibration Characteristics Analysis of Boom Sprayer for Upland-use Using Frequency Analysis)

  • 김영주;이중용
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2003년도 동계 학술대회 논문집
    • /
    • pp.244-250
    • /
    • 2003
  • 국내에 보급된 방제기는 인력분무기, 동력 분무기, 동력 살분무기, 스피드 스프레이어, 붐방제기 등이 있다. 그 중 동력경운기에 탑재하거나 트랙터에 견인되는 동력분무기를 주축으로 기계화되어 있다. 작은 입경의 분무입자로서 가급적 적정량을 균일하게 뿌릴 때 방제효율을 높일 수 있는데도 불구하고, 동력분무기에 의한 액제 살포는 원거리 살포에 따라 분무입자의 입경 분포가 다양하며 대부분 분무입자가 매우 크므로 고른 살포를 기대하기 어렵기 때문에 약액을 1000대 1로 희석하여 흠뻑 적실 정도로 다량 살포를 하여 살포효율을 높이고 있다. 그러나 이러한 방제 방법은 효율성, 작업능률과 환경의 오염 측면에서 상당한 문제로 지적되고 있다. (중략)

  • PDF

충돌제트로 생성되는 분무의 특성에 관한 연구 (A Study on the Characteristics of the Spray Produced by Two Impinging Jets)

  • 강보선
    • 한국분무공학회지
    • /
    • 제2권4호
    • /
    • pp.22-28
    • /
    • 1997
  • In this paper an experimental study of a spray created by two impinging jets is presented utilizing a novel two-reference-beam double-pulse holographic technique. Visualization of the overall spray pattern as well as measurements on the size and velocity of the droplets were performed with the special emphasis on the effect of physical properties of liquids. The overall spray pattern clearly revealed the inherent wave nature In the disintegration process of this type of atomization. The structure of liquid elements near the impingement point is indicative of the mechanisms of the disintegration process. Surface tension plays an important role in the droplet size without any noticeable effect on the spray pattern, whereas viscosity affects the structure without any significant effect on the droplet sire. The droplet velocities were not affected by liquid properties.

  • PDF

이류체노즐을 이용한 분무량과 분무입경 제어시스템 개발 (Development of Control System of Twin-Fluid Nozzles for Controlling Spraying Rate and Droplet Size)

  • 이중용;안형철;정창주
    • Journal of Biosystems Engineering
    • /
    • 제25권1호
    • /
    • pp.11-18
    • /
    • 2000
  • In precision chemical application increment of biological efficacy with less chemical is the virtue. spraying rate and droplet size is closely related to biological efficacy. this study was performed to develope a spray-control-system that could control spraying rate and droplet size independently. Twin-fluid nozzles were selected and tested to certify if the nozzles were suitable for the objective of this study. Characteritics of the nozzles i.e., spraying rte and droplet size change u8nder the changes of spraying pressure and air pressure were statistically modeled. The model had I to 1 matching property between dependent variables and independent variables. Using the property and the model, inverse relationship could be determined between variables. A feedback spray control system was developed and tested with predetermined error of 5 % in pressure. The system showed 4 % error in spraying rate and 9 % error in droplets size. Performance of the system could be upgraded by fine tuning but, in practical sense keeping air pressure in the field sprayer was the bottle neck of commercialization of the spray system.

  • PDF

분무 공간의 공기온도와 보조공기의 공급압력이 연료입자의 미립화에 미치는 영향 (The Effect of the Air Temperature and Air-assisted Pressure on the Fuel Droplet Atomization)

  • 김영석;이중순;윤수한;정성식;하종률
    • 한국분무공학회지
    • /
    • 제3권4호
    • /
    • pp.16-24
    • /
    • 1998
  • The fuel injection type, in the gasoline engines of atomization of fuel droplet and its distribution hae influenced directly on the decision of engine performance and harmful emission. In this paper, atomization characteristics of fuel spray is investigated with microscopic visualization system. Particle motion analysis system is used to measure the SMD from fuel spray of air-assisted injector by initial factors such as temperature of ambient air and air-assisted pressure. As air-assist pressure and ambientair temperature increase, the SMD is decreased, and its variation is more stable.

  • PDF

LC/ESI/MS 와 기능성 화장품 관련 분석에의 응용

  • 이명희
    • 대한화장품학회지
    • /
    • 제25권3호
    • /
    • pp.23-46
    • /
    • 1999
  • LC/MS는 HPLC의 분리능과 질량분석기의 화합물의 확인 능력을 결합시킨 기기이다. 여기서 사용되는 이온화 방법은 GCJMS에서 사용되어지는 전자이온화법(electron ionization, EI)이나, 화학이온화법(chemical ionization, CI)은 부적당하기 때문에 최근 개발되어진 연성 이온화법의 대표적인 고속원자폭격식(Fast atom bombardment, FAB)이나 전기분무이온화식 (electrospray ionization, ESI) 등이 사용되고 있다. 이중 전기분무이온화법은 고속원자폭격법에서 사용되는 매트릭스를 사용하지 않기 때문에 매트릭스 이온의 부재로 인한 낮은 바탕 신호, 오래 지속되면서 안정된 초기 이온 전류, 샘플링의 용이성, HPLC와의 더 좋은 호환성 등의 장점을 제공한다. 이러한 전기분무이온화 방법은 극성이 매우 크거나 휘발성이 낮은 물질로 보통의 EI나 CI 이온화 방법으로 분석이 어려운 물질들을 분석할 수 있다. 또한 열에 불안정하거나 분자의 분자량이 다른 단백질 등의 분석도 가능하다. 이러한 LC/ESI/MS 방법을 이용하여 열에 불안정하고 극성이면서 분자량이 커서 GC/MS 펄의 분석이 어려운 기능성 화장품 원료로 주목받고 있고 생체에 존재하는 지질 성분으로 알려진 레시틴과 세라마이드의 분석이 가능함을 소개하고 분리와 동시에 그 분자량과 구조에 대한 정보를 빠르게 얻을 수 있음을 소개하였다.

  • PDF