• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.549-559
• /
• 2005

A railway bridge with a double composite section is proposed to enhance the structural performance of existing two-girder bridges because the governing design parameter of railway bridges is the flexural stiffness. The concrete deck in negative moment regions is neglected in the design of continuous composite bridges assuming the concrete slab has no resistance to tension. Therefore, the flexural stiffness of the composite section in the negative moment region is reduced resulting in the increase of the depth of the steel section. In order to resolve this disadvantage, several methods are suggested and the double composite section is one of the excellent solutions for extending the span length and increasing the flexural stiffness. In this study, push-out tests on lying studs and mixed stud shear connection with lying and vertical studs were performed to investigate the behavior of the shear connection in the double composite section. Static strength of the shear connection was evaluated through the test results and numerical analyses.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.576-581
• /
• 2008

High-quality double-walled carbon nanotubes (DWNTs) were synthesized without defects and amorphous carbonaceous particles by catalytic decomposition method at $800^{\circ}C$ in high yield. As-synthesized carbon materials almost consist of DWNT bundles with a diameter 12 - 20 nm.. The DWNTs rope have uniform diameter about 2 - 5 um and length up to several tens micrometer. DWNTs is inner tube diameter 0.9 - 1.5 nm and outer tube 1.6 - 2.2 nm. We investigate the crystallinity of DWNTs by TEM and Raman spectroscopy. We also found that the Fe-Mo bimetallic catalyst was active as a very efficient catalyst for the synthesis of DWNTs with the catalyst decomposition method. Our results also indicate that Tetra Hydro Furan (THF) is a very ideal carbon source for the synthesis of DWNTs.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.93-96
• /
• 2008

500나노 입자 및 기본 물성이 우수한 이중층상구조금속수화물(LDH)를 합성하고 PVC 수지에 적용하여 고온, 저온열안정성 및 가공특성으로 인장강도, 신율, 체적저항 등이 우수한 시제품을 합성한 후 개발한 이중층상구조금속수화물(LDH) 시제품을 사용하여 무독성안정제(금속석검계), 내외부활제류, 가공조제, 산화방지제 등 기타 첨가제 등을 사용하여 PVC수지에 적용하여 수지배합에 따른 시험편을 제작하여 배합비별로 고온, 및 저온열안정성, 체적고유저항, 가공성(인장강도, 신율 등), 내후성, 초기 착색성 등 물성, 기계적 가공특성 및 성능이 우수한 할로겐수지용 무독성배합을 개발한다. 최종적으로 개발한 이중층상구조금속수화물(LDH)을 사용하여 제조하여 PVC 수지의 열안정성 및 기계적 가공특성이 우수한 중금속계대체용 무독성복합열안정제를 개발하였다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.339-347
• /
• 2006

This study proposes a double-composite section to enhance the s serviceability of twin-girder railway bridges, especially in terms of the flexural stiffness of the composite section in negative-moment regions. This paper deals with experiments on continuous twin-girder bridge models with 5m-5m span length with the proposed double-composite action. From results of static tests on the bridge models, several design considerations were investigated including effective width, shear connection and ultimate strength of the double-composite concrete slab showed full shear connection, which verified the suggested empirical equation. From the flexural behavior of the double-composite section, the effective width of the bottom concrete slab can be evaluated as that of the concrete slab under compression. The ultimate flexural strength of the bridge models verified the validity of the rigid plastic analysis of the double-composite section. Design guidelines were suggested based on the test results.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.437-446
• /
• 2014

The dihydroxylation reaction of allylic amines is a facile and useful synthetic method to obtain amino diol structures that are widely found in lots of biologically important natural products. This review will focus on the recent methods of both substrate-controlled and ligand-controlled dihydroxylation reactions of acyclic allylic amines. In addition, several applications of the diastereoselective dihydroxylation methods to asymmetric syntheses of natural products are presented.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.16-21
• /
• 2013

Recently, frequency synthesizers are being designed in two ways narrow-band loop or dual-loop for wide-band to reduce the phase noise. However, dual-loop has the disadvantage of center frequency mismatch and requiring an extra loop. In this paper, we propose a new structure that supports a range of 800Mhz ~ 3Ghz with multiple control of the single-loop frequency synthesizer without another loop. The control voltage of the VCO(coarse, fine) will be fixed, and finally the VCO will have a low Kvco. The frequency synthesizer is simulated using UMC $0.11{\mu}m$ process, proposed frequency synthesizer can be used in a variety of applications in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.400-413
• /
• 2016

The horizontal shear capacity when the flange of a steel girder is replaced with 80 MPa concrete is important for its structural safety. In this study, 6 specimens with different interface conditions were designed and fabricated based on the Limit State Design Code on Korean Highway Bridges and static tests were performed to measure the horizontal shear capacity. Not only the resistance factors of the stud shear connector, concrete and reinforcement, but also the surface conditions of the casing concrete and spacing of the horizontal shear reinforcements were used as the experimental variables. The experiments showed that the interfaces between the steel girder and the concrete flange have stronger joint performance than those between the concrete flange and deck slab. To ensure the composite action in the plastic zone, the conservative horizontal shear reinforcement is more important than the roughness in the concrete face.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.98-107
• /
• 1995

천연물 중 casbene-type diterpenoid의 하나인 crotonitenone의 합성이 시도되었다. 합성 방법으로는 crotonitenone의 각 부분을 먼저 합성하여 이들을 합하는 방법(convergent method)을 적용하였으며, 각 부분이 최종물질에 적합한 sterochemistry를 갖게 하기 위하여 시작물질로는 chiron으로 S-(-)-citronellol과 IS-chrysanthemic acid를 사용하였다. 환구조를 형성하는데 중요한 역할을 할 TBDMS protecting group이 붙은 phosphonium salt(synthon A) 가 고압반응으로부터 고수율 (70%)로 생성되었다. 또한, 중요한 반응으로서 synthon A와 hydroxy lactone(synthon B)과의 Witting reaction이 성공적으로 이루어졌다. 그러나, TBDMS protecting group의 존재하에 이중 치환된 이중결합(disubstituted double bond)과 삼중치환된 것과의 선택적인 환원의 어려움으로 인하여 최종 물질의 합성방법이 재고되었으며 이에 대해 간단히 논하였다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.566-575
• /
• 2008

We investigated the field emission characteristics from the planar field emitters made of double-walled carbon nanotubes (DWCNTs) synthesized by a catalytic chemical vapor deposition (CCVD) method. Transmission electron microscopy, Thermogravimetric and Raman analysis showed that the carbon materials have a low defect level in their atomic carbon structure, pointing to the synthesis of high-purity DWCNTs. For field emission properties of DWCNTs, the turn-on field of DWCNTs was $1.9\;V/{\mu}m$ and the current density was about $74\;mA/cm^2$ at $8.1\;V/{\mu}m$, which is sufficient for the applications of field emission displays and vacuum microelectronic devices. The DWCNT field emitters also exhibited a uniform field emission pattern and good field emission stability in a diode configuration.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.06a
• /
• pp.801-805
• /
• 1998