• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.495-502
• /
• 2020

Purpose: The aim of this study was to assess the effectiveness of domestically developed volar locking plate which has the concept of double-tiered subchondral support (DSS) in maintaining the reduction after distal radial fracture surgery. Materials and Methods: From July 2017 to December 2018, 54 patients were assessed. Plain radiographs were obtained immediately after surgery and at the last follow-up, and the radiographic parameters were measured in those images: radial length, radial inclination, volar tilt, ulnar variance, and distal dorsal cortical distance. The patients were subdivided into their age, type of fracture, and the position of the plate to evaluate the influence of each factors on the reduction maintenance. Results: Distal dorsal cortical distance in radiographs after the surgery was 5.91 mm (standard deviation, ±1.95 mm) on average. Significant differences in the radial length (p=0.038) and ulnar variance (p=0.001) were observed between immediately after surgery and at the last follow-up. When the parameters were evaluated by dividing the patients into subgroups according to the three specific factors, the ulnar variance showed a significant increase at the last follow-up when the patients were included 65-years-old or older. AO/OTA type C3 fracture, and Soong classification grade 0 plate position (p=0.007, p=0.012, p=0.046, respectively). Conclusion: Using the domestically developed DSS-type volar locking plate, significant reduction after distal radial fracture surgery could be maintained successfully. On the other hand, further study will be needed to determine about the reduction loss of the lunate facet identified in special cases that deal with fractures in elderly patients, unstable AO/OTA type C3 distal radial fractures, and Soong classification grade 0 plate position.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.77-83
• /
• 2010

This paper presents the dual resonance PIFA(Planar Inverted F-Antenna) which satisfies the requirements of the 802.11n standard at both 2.4 GHz and 5 GHz frequency bands. Patch for 2.4 GHz and U-Type slot for 5 GHz were used for dual resonance, respectively. In this paper, the characteristics of an antenna were investigated by varying locations of short plate and feed point, the width of the short plate, the thickness and the location of U-Type slot. To investigate the characteristics of the PIFA, HFSS(High Frequency Structure Simulation) for the simulation was used. And the measurement results of a fabricated PIFA were compared with the simulated ones. The measurement and simulation results show that good dual resonance characteristics as the thickness of U-type slot decreases and when the location of U-type slot is far from the feed point.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.133-142
• /
• 1993

In a computer-controlling wave generating system. it is sometimes necessary to incorporate the discrete transfer operation of wave board into control circuit in order to control the system in a more delicate way. A numerical filter simulating the transfer operation of wave board in time domain is designed in the form of a discrete recursive filter. The filter was applied to some example board inputs f3r either regular or irregular wave conditions in order to evaluate the filter performance. The filter outputs were compared with the results of theoretical analysis or the discrete convolution method. showing their excellent agreements. The discrete realization of the filter presented hen is in fact of the bilinear transformation. It was shown that the transformation always avoids the aliasing errors, being surely applicable with a sufficient accuracy even for the band-unlimited transfer function of wave board.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.150-150
• /
• 2008

고효율 LED를 얻기 위해서는 LED의 내부 양자효율과 외부 양자효율이 높아야 한다. 현재 GaN-Based LED의 내부 양자효율은 결정의 질의 개선 및 이중이종접합 또는 다중양자우물 구조와 같이 활성층의 캐리어 농도를 높이는 접합구조로 설계되어 거의 100%에 가까워졌다. 그러나 외부 양자효율은 반도체 재료의 높은 굴절률로 인하여 외부로 탈출하지 못하고 내부로 전반사 되어 반도체 내부에 갇히게 되는데 이처럼 갇힌 빛은 반도체와 중간 Interface에 TIR(total internal reflection) 또는 반사판에 의해 계속적으로 반사 된다. 그러므로 이를 해결하기 위한 플립칩 구조, 포토닉 크리스탈 등의 여러 가지 방법들이 제시되고 있지만 아직도 더 높은 외부 양자 효율의 개선을 요구하고 있다. 본 연구에서는 새로운 형태의 반사판(Al) 즉 p-GaN과 반사판 사이의 interlayer로 반사판과의 오믹 접촉을 고려한 Embo type의 NiO를 구현하여 반사된 빛의 방향을 내부반사를 줄일 수 있는 방향으로 변화시킴으로써 광 추출 효율의 향상을 기대할 수 있게 되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1160-1166
• /
• 2006

The information of vehicle is very important for maintaining traffic order under the present complex traffic environments. This paper proposes a new vehicle plate recognition mechanism that is essential to know the information of vehicle. The proposed method uses SVM which is excellent object classification compare to other methods. Two-class SVM is used to find the location of vehicle plate and multi-class SVM is used to recognize the characters in the plate. As a real-time processing system using multi-step image processing and recognition process this method recognizes several different vehicle plates. Through the experimental results of real environmental image and recognition using the proposed method, the performance is proven.

• Smart Media Journal
• /
• v.10 no.4
• /
• pp.63-70
• /
• 2021

Public Signs guiding drivers on the road should help make decisions within a short period of time, so appropriate information should be effectively expressed at the point. Currently, the road marking rules revised by the law show a significant change in the type of information, expression method, and weight of expression compared to existing road signs to be based on road name addresses. This study analyzed whether the revised road signs changed based on the road name were effective in perspective of perception-cognition-understanding-projection and examined whether they provided appropriate information for the actual driving environment. Based on the analyzed information, an experiment was conducted to present an improved design, evaluate the degree of visibility compared to existing road name-oriented signs, and a qualitative investigation was conducted on the suitability of the sign contents. Through this, it is expected that more suitable driving information and measures to increase intuitive visibility can be reviewed.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.270-278
• /
• 2020

In this paper, sound transmission of Micro-Perforated Plates (MPPs) installed in an impedance tube with a circular cross-section is described using an analytic method. Vibration of the plates is expressed in terms of an infinite series of modal functions, where modal function in the radial direction is given by the Bessel function. Under the plane wave assumption, a low frequency approximation is derived, and a formula for the sound transmission coefficient of multi-layered MPPs is presented using the transfer matrix method. The Sound Transmission Losses (STLs) of single and double MPPs are computed using the proposed method and compared with those done by the Finite Element Method (FEM), which shows an excellent agreement. As the perforation increases, the STL is degraded, since the STL becomes dominated by the perforation ratio rather than by vibration of the plate. The STL shows dips at natural frequencies as well as at the mass-spring-mass resonance frequency. The proposed model for the STL prediction in this study can be applied to an arbitrary number of MPPs, where each MPP may or may not have a perforation.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.1
• /
• pp.12-19
• /
• 1993

진동시험 동안 구조물은 진동시험기로부터 높은 진동에너지를 받게 되는데 공급되는 에너지를 시험물에 전달하기 위해서는 시험물에 따라 다양한 종류의 진동시험치구가 필요하게 된다. 이중에서 T-형상 진동시험치구는 진동시험축에 대해 3방향으로 시험물을 설치할 수 있고, 형상이 간단하며, 또한 값이 저렴하므로 많은 설계자들은 T-형상 치구를 설계하여 사용한다. 그러나 이 치구는 수직판이 어떤 주파수에서 평판처럼 공진현상을 일으키기 때문에 동역학적으로 설계하기가 어렵다. 본 논문에서는 진동시험치구의 기능을 향상시키기 위해 모우드 시험(Model Testing)기법을 사용하는 방법과 시험결과를 근거로 설계변경을 위해 수직보강판, 수평보강판, 그리고 천연 고무패드를 사용하여 이것들이 치구의 동특성에 미치는 영향을 기술하며 그 결과를 치구설계 때 응용 가능하도록 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.1
• /
• pp.37-44
• /
• 1999

비등방성으로 적층된 복합판 및 쉘구조물에서 온도와 습도의 급격한 변화는 구조물의 강도와 성능을 저하시키는 중요한 원인이 된다. 더욱이 하중에 의한 역학적 변위와 조합될 때에는 좌굴, 대변형 혹은 고응력 상태를 유발하게 된다. 본 연구에서는 이중 퓨리에급수를 이용하여 3차의 전단변형함수로 가정된 평형방정석을 전개하고 폭-두께비, 형상비의 변화 그리고 재료의 성질에 따른 결과에 대하여 고찰하였다.

• Magazine of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.42-47
• /
• 2010