• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.655-660
• /
• 2001

Surface photovoltage spectroscopy was used to study $In_{0.5}(Ga_{1-x}Al_x)_{0.5}P/GaAs$ grown by metalorganic chemical vapor deposition(MOCVD). Energy gap related transition in GaAs and $In_{0.5}(Ga_{1-x}Al_x)_{0.5}P$ were observed. By measuring the frequency dependence of $In_{0.5}(Ga_{1-x}Al_x)_{0.5}P/GaAs$, we observed that SPV line shape does not chance, whereas the amplitude change. This results is due to the difference in the lifetimes of the photocarriers in GaAs and in $In_{0.5}(Ga_{1-x}Al_x)_{0.5}P$. We also have evaluated the parameters that describe the temperature dependences of the band gap.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.429-429
• /
• 2015

면적감소계수(ARF)는 면적강우에 대한 지점강우의 비로 정의되며, 과거 면적확률강우량 산정시 유역 내의 여러 지점강우량을 티센기법, Kriging 기법 등을 통해 공간보정을 실시하고 면적강우량을 산정하였다. 하지만 이러한 방법은 강우의 시공간분포 특성을 정확히 반영하지 못하는 단점이 있기 때문에, 최근에는 많은 연구에서 레이더 강우를 활용한 ARF를 산정한다. 기존의 연구에서 이중편파레이더를 사용하여 낙동강 유역의 호우중심형 ARF를 산정한 바 있기 때문에, 본 연구에서는 산정된 ARF 값을 적용한 설계홍수량은 분석해보고자 한다. 대상유역은 낙동강 유역내의 유역들을 대상으로 하고자 한다. 낙동강 유역에는 약 $175km^2{\sim}2000km^2$의 다양한 면적의 유역들이 존재함을 확인하였다. 따라서 면적별로 대표적인 유역을 선정하여 설계홍수량을 산정하기에 적합한 지역이라 판단된다. 설계홍수량을 산정하기 방법으로는 강우-유출 모형을 이용하고자 한다. 이용할 모형은 호주에서 개발된 IHACRES 모형으로써, 개념적인 모형으로 장기 및 단기 강우사상을 모두 모의할 수 있는 특징을 갖고 있다. 따라서 낙동강 내의 선정된 유역들을 실제 강우자료를 통해 각 유역의 매개변수를 산정하고, 확률강우량과 Huff분포를 이용한 지속시간 24시간의 설계강우량을 산정하고자 한다. 산정된 설계강우량에 앞서 소개한 이중편파레이더 ARF를 적용하여 설계홍수량을 산정하고, ARF를 적용하지 않고 산정한 설계홍수량, 두 값의 차이를 통해 ARF를 통해 감소된 설계강우량의 비와 ARF 적용 유무에 따른 설계홍수량 차이의 비를 비교하여 이중편파레이더 ARF가 면적별로 미치는 영향을 알아보고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.502-507
• /
• 2013

In this paper, a circular dual mode horn with modified aperture is proposed to improve a E/H-plane radiation pattern symmetry of a conventional oversized circular dual mode horn. The proposed antenna consists of a feeding section, a mode generation section and a phase matching section which has aperture shape transition from circle to ellipse or rectangle to improve a E/H-plane radiation pattern symmetry. To compare the performances between the proposed antenna and the convenional circular dual mode horn, the conventional circular dual mode horn and the proposed circular dual mode horn with rectangular aperture are fabricated and researched at 15 GHz. The measured results show that the conventional circular dual mode horn has 3.394 dB difference while the proposed antenna has only 0.539 dB difference between E and H-plane radiation patterns within the -11 dB beamwidth($53^{\circ}$) which is required beamwidth of the feed horn for the maximum aperture efficiency where f/d ratio of reflector antenna is 1.

• Korean Journal of Culture and Social Issue
• /
• v.12 no.3
• /
• pp.49-68
• /
• 2006

The present study was attempted to compare duality in value structure and judgment system between youth, adults and North Korean defectors. A questionnaire was administered to 150 college students(Men: 89, Women: 61), 155 adults(Men: 80, Women: 75) and 80 North Korean defectors(Men: 39, Women: 41). Participants rated their values, behavior and South Korean behavior (or North Korean behavior for North Korean defectors) as a whole both on the 7 dimensions relevant to characteristics indigenous to Korean society and on their opposite 7 dimensions characteristic of Western culture. Results indicated that defectors marked the highest score on the traditional value dimensions, and yet youth ranked the first for the western value systems. Also, duality in value systems was the most severe for the defectors. In relation to dual judgement system in behavior, both young and old generation judged Korean behavior more negatively than their own. This was also the case for the North Korean defectors. Those findings were discussed in terms of cultural changes in Korean society.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}$= 0.05. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37^{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}=0.05$. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).

• Korean Journal of Social Welfare
• /
• v.64 no.3
• /
• pp.281-308
• /
• 2012

The purpose of this article was to study how social workers' belief and behaviors with respect to ethical issues have changed during the past decade by comparing the results of studies carried out in 2001 and 2011, respectively. Focusing on dual relationship with clients, this article reviewed how social workers' belief and behaviors towards ethical issues have changed over the changing socio-demographic characteristics and varying properties of the organizations for which the workers provide services. To accomplish this purpose, we surveyed 356 social workers while the results of the survey was subjected to a comparative review with another research performed 10 years ago under a similar approach. Widely acknowledged during the survey was that the social workers appeared to have more rigid ethical standards compared to 10 years ago; however, they tended to be more permissive in certain issues such as bartering relationship and private relationship. In addition, according to the survey, belief and behaviors of social workers towards ethical issues varied depending upon their gender, education level, and the properties of the organization as seen in the survey in 2001 while the modalities have changed over the decade. Based on these results, it is suggested that the curriculum of social work ethics should be revised to reflect present field situation and inspire ethical sensitivity.

• Annual Conference on Human and Language Technology
• /
• 1998.10c
• /
• pp.169-174
• /
• 1998

한국어(韓國語)의 격조사(格助詞)와 일본어(日本語)의 격조사(格助詞)의 유사성(類似性)과 상이성(相異性)에 관한 연구(硏究)는 많지만 격조사(格助詞)와 단문(單文)의 통사적(統辭的) 제약(制約)에 관한 연구(硏究)는 미비하다. 본 연구(硏究)에서는 이중대격구문(二重對格構文)의 관점(觀点)에서 양국언어(兩國言語)의 통사적(統辭的) 상이점(相異点)과 분포(分布)의 차이(差異)를 명백(明白)히 밝히며, 일본(日本)의 한국(韓日) 기계번역(機械飜譯) 시스템에서의 처리(處理)와 오역(誤譯)의 처리(處理)를 고찰(考察) 하는 것을 목적(目的)으로 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.138-138
• /
• 2010

이중 주파수를 이용한 고주파 용량성 결합 플라즈마 장치는 반도체 및 디스플레이 생산 공정에서 널리 사용되는 장치 형태이며 일반적으로 이온 플라즈마 주파수보다 높은 주파수의 고주파 전력과 이온 플라즈마 주파수보다 낮은 주파수의 저주파 전력을 인가하여 플라즈마 발생 밀도 및 입사 이온 에너지를 독립적으로 조절할 수 있다. 용량성 결합 플라즈마 장치에서는 전극의 쉬스 임피던스가 비선형적으로 변화함에 따라 전극의 전압, 전류 및 플라즈마 전위는 수많은 고조파를 포함하게 되며, 이중 주파수가 인가된 경우 이러한 고주파와 저주파 신호의 고조파가 상호 변조된 형태로 나타나게 된다. 본 연구에서는 주파수에 따른 이온의 거동 특성 차이를 이용하여 변조된 형태의 Lieberman의 비균일 RF쉬스 모델을 가정한 고주파 쉬스를 단순한 저주파 쉬스로 모사하였다. 단순화된 저주파 쉬스 임피던스를 이용한 회로 모델을 구성하여 100MHz와 2MHz RF전력을 사용하는 용량성 결합 플라즈마 장치에서 측정된 전극 전압, 전류 및 플라즈마 전위 신호의 위상차 및 고조파 발생 특성을 분석하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.183-188
• /
• 1997

안구의 운동은 시각 환경에서의 진행중인 정보처리와 관련된 지각적, 인지적 과정을 밀접히 반영하는 중요한 지표로서, 특히 공간 지각과의 상관은 비교적 명확히 확립되어 있다. 본 연구는 공간지각에 관여하는 안구운동의 특성을 파악하여, 공간지각을 반영하는 안구운동 지표를 개발한다는 목표 아래, 피험자가 느끼는 공간의 확장과 축소의 특성을 이중도약과제(double-step paraeigm)를 사용하여 관찰한 것이다. 이중도약과제는 도약(saccadic)안구운동의 오차를 유발시키는 실험기법으로, 두개의 시각자극을 하나씩 연속적으로 보여주되, 두번째 자극은 안구운동이 일어나는 도중에 제시하는 것으로서, 인위적으로 왜곡된 공간에 대한 피험자의 공간적응을 관찰하는데 사용되었다. 이 과제는 다시 자극의 이차도약 방향에 따라 축소감 조건과 확장감 조건으로 나뉘었고, 머리운동의 역할을 판별하기 위해 머리를 고정한 조건과 머리를 자유롭게한 조건으로 분류되었다. 그 결과 머리가 고정된 상태에서는 축소감 조건에 대한 적응이 확장감 조건에서보다 더 빨리 일어나고, 그 적응후의 시선이동의 변화량에서도 축소감 조건이 더 크게 나타났다. 또한 머리를 자유롭게 할 공간 지각의 정확성이 증가하며, 축소감과 확장감 경험속도의 차이가 약 49.2%까지 해소되었으나, 여전히 축소감의 경험이 더 잘 일어났다.