• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1339-1345
• /
• 1989

본 연구에서는 앞에서 개발된 온도 제어 시스템을 더욱 소형 경량화하기 위해 서 일반 마이크로 컴퓨터 대신에 원보드 마이컴(one-board micom)을 사용하였다. 원보드 마이컴은 프로그램을 기계어로 작성해야하는 어려움이 있으나 가격이 저렴하고 주변장치가 필요없으며, 크기가 작아 제어시스템을 소형경량화 시킬수 있는 장점이 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.1-7
• /
• 2010

Dual throat nozzle(DTN) is recently attracting much attention as a new concept of the thrust vectoring technique. This DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze a fundamental performance of a dual throat nozzle(DTN) at various nozzle pressure ratios(NPR) and throat area ratios. Two-dimensional, axisymmetric, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. NPR was varied in the range of NPR from 2.0 to 10.0, at different throat area ratios. The present computational results were validated with some experimental data available. Based upon the present results, the performance of DTN is discussed in terms of the discharge coefficient and thrust efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.5
• /
• pp.78-87
• /
• 1994

In this paper design and implementation of ship's distributed remote control system using dual-microprocessor is presented for real time process. The proposed system is implemented with the single chip microprocessors in tightly coupled mode and results in speed up of $s_p$=1.74. Under the assumption that the nodes are interconnected in multidrop, the overall system performance such as average throughout-delay characteristics and effective throughput are analyzed using M/G/1 queneing model, and results show that the proposed node can be used in medium sized distributed monitoring and control system.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.35-38
• /
• 2002

본 논문에서는 5.8GHz 대역 무선 랜과 차세대 이동통신서비스인 IMT-2000 양 대역에서 동작하는 이중대역 전력증폭기 선계 및 제작에 관하여 기술하였다. 최종 출력목표는 1W이며, 2GHz와 5GHz의 이중밴드로 동작하기 위해 2개의 능동소자를 사용하여, 2개의 독립적인 증폭기를 제작한 후 바이어스 제어회로를 통하여 두 대역을 결합시켰다. 바이어스 제어회로에서 모드 제어 전압 $V_m$의 전압변화에 따라 양 모드간의 변환이 이루어진다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.451-458
• /
• 2000

In wind power generating system connected in power grid, the value of stator flux has almost constant because the stator side of doubly fed induction machine(DFIM) is connected to power grid. Using the stator and rotor current, it is possible to estimate the slip angle and rotor speed. A stator flux orientation scheme and rotor slip estimator are employed to achieve control of generating power in stator side. To verify the theoretical analysis, a 5-hp DFIM prototype system and PWM power converter are built. Results of computer simulation and experiment are presented to support the discussion.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.479-484
• /
• 2006

This paper presents an active control of the aperture type near-field storage head. In order to achieve a fast and accurate control, a dual servo control algorithm is applied. Based on the big difference in time constants of two actuators, they are used independently. With the combination fine and coarse actuator, the disk is rotated up to 10 rpm speed until the gap is controlled within 100 nm. From the experimental results, the feasibility and the performance of active dual servo gap control is proved.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.54-56
• /
• 2018

본 논문은 평균 전류 분담 기법을 적용한 UPS(Uninterruptible Power Supply) 시스템의 병렬 운전 기법을 제안한다. 각각의 UPS는 전류 정보를 공유하기 위하여 CAN 통신을 사용하며, 이중 루프 방식의 전압, 전류제어기로 구성되어 있다. UPS의 전류 분담 성능을 내부 전류 제어기의 피드백 전류인 인덕터 전류, 커패시터 전류 그리고 통신 시지연에 따라 영향을 분석하고 3상 30kVA급 UPS에 적용하여 그 유효성을 검증하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.875-878
• /
• 2005

This paper presents active control of aperture type near-field storage head. In order to achieve fast and accurate control, dual servo control algorithm is applied. Based on the big difference in time constant, we seperate two actuator and control independently. With the combination of fine and coarse actuator, gap is controlled within 100nm until the disk rotates upto 10 rpm speed. From the experimental results, the feasibility and performance of active gap control is proved.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.453-460
• /
• 2008

This paper proposes a new multi-output LLC resonant converter by using single control IC, which has the tight-regulated dual output voltage without additional power devices and controller. The proposed converter has master and slave outputs, of which regulations are achieved by the PWM(pulse width modulation) and PFM(pulse frequency modulation), respectively. Different from the conventional dual-output LLC resonant converter, the proposed converter has no additional post-regulators like a boost converter. Therefore, it features a low cost, small size, and high efficiency. To confirm the validity and prove the superiority of proposed converter, simulated and experimental results on a 50" FHD PDP power set prototype are presented.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1204-1212
• /
• 2008

This study enables to troubleshoot the problems of the existing dual system with the help of the implementation of totally dualized fault-tolerant system to L-CTC computer and HADAX, and equipments are simplified and systems are modernized with the addition of the control function, as a upgraded LCP control system, to L-CTC computer on the basis of WINDOWS based O/S switched from DOS environment. An error on Microlok, which is aninterlocking apparatus, forwarded to L-CTC computer ensures to handle the false data during the operation of the system. This paper discusses a sure way to prevent the deterioration of (SMRT) L-CYC system and to bolster its stability with formation of the dual system. Additionally, WINDOW based O/S consisting of L-CTC computer leads to simplification and modernization of facilities and enhances maintenance functions offering centralization for branch offices and machine rooms as well.