• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1081-1087
• /
• 2006

Generally, biped walking is difficult to control because a biped robot is a nonlinear system with various uncertainties. In this paper, we propose a hybrid sliding-mode control method using a WNN uncertainty observer for stable walking of the 5-link biped robot with model uncertainties and the external disturbance. In our control system, the sliding mode control is used as main controller for the stable walking and a wavelet neural network(WNN) is used as an uncertainty observe. to estimate uncertainties of a biped robot model, and the error compensator is designed to compensate the reconstruction error of the WNN. The weights of WNN are trained by adaptation laws that are induced from the Lyapunov stability theorem. Finally, the effectiveness of the proposed control system is verified through computer simulations.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.258-266
• /
• 2012

This paper describes a biped walking algorithm for a hydraulic humanoid robot on inclined floors. To realize stable and robust biped walking, the walking algorithm was divided into five control strategies. The first is a joint position control strategy. This strategy is for tracking desired joint position trajectories with a gain switching. The second is a multi-model based ZMP (Zero Moment Point) control strategy for dynamic balance. The third is a walking pattern flow control strategy for smooth transition from step to step. The fourth is an ankle compliance control, which increases the dynamic stability at the moment of floor contact. The last is an upright pose control strategy for robust walking on an inclined floor. All strategies are based on simple pendulum models and include practical sensory feedback in order to implement the strategies on a physical robot. Finally, the performance of the control strategies are evaluated and verified through dynamic simulations of a hydraulic humanoid on level and inclined floors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1744-1745
• /
• 2007

휴머노이드 로봇은 높은 자유도 때문에 생기는 비선형성 때문에, 안정성을 보장하는 것은 중요한 연구 분야중 하나이다. 또한 안정적인 보행을 하기위해서 미지의 환경하에서 발의 착지는 첫 번째 단계중 하나이다. 그러나, 이족보행 로봇은 반작용 없이 안정적인 발의 착지를 하기 위한 정보를 얻는것이 쉽지 않기 때문에, 착지에 관한 많은 연구가 활발히 진행되고 있다. 그러므로, 본 논문에서는 퍼지 시스템을 이용한 실시간 착지 제어 방법에 대해 제안하였다. 실시간 착지 제어는 다양한 지면의 조건에서 안정성을 갖고 있어야 하는 제약 조건을 갖는다. 이전까지의 연구에서는 실시간 착지제어에 관한 방법이 매우 전무하고 부가적인 기계적 장비를 (특수한 발의 구조) 필요로 하였다. 그러나, 본 논문에서는 힘 센서만을 사용하여 다양한 환경이 인식될수 있게 하였다. 제안된 방법은 19 자유도를 갖는 휴머노이드 모델을 통해 실험되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.249-251
• /
• 2005

For walking patterns of biped robots, knee-bent patterns are used in most cases. However, humans are mostly walking with their knees nearly stretched. In this paper, a human-like walking algorithm using hybrid system is proposed for biped robots, The hybrid system consists of the logically constituted discrete system, in which the discrete states are defined by considering the walking characteristics, and the continuous state system used for motor control. It is shown that the proposed algorithm is effective by experimental studies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.594-596
• /
• 2005

This paper present a learning controller for repetitive gate control of biped robot. The learning control scheme consists of a feedforward learning rule and linear feedback control input for stabilization of learning system. The feasibility of learning control to biped robotic motion is shown via dynamic simulation and experimental results with 24 DOF biped robot.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2266-2268
• /
• 2009

In this paper, a simple method of angle velocity estimation is presented for a passive dynamic biped robot. The estimation problem is not an easy task because its dynamic model is a hybrid system involved with an impact condition. Instead of designing a complex observer for hybrid systems we simply utilize the impact condition to reset the initial condition of the high-pass filter when the non-support leg hits the slope. The approach has been verified by simulation results.

• 한국컴퓨터그래픽스학회논문지
• /
• 제23권2호
• /
• pp.23-27
• /
• 2017

본 논문에서는 기존에 발표되었던 데이터 기반보행제어 기법의 단점을 보완하는 다리 간 충돌 회피 기법을 제안한다. 2010년에 제안된 Lee et. al. 의 데이터 기반 이족 보행 제어 기법 [1]은 경우에 따라 보행 중 두 다리가 서로 교차하는 동작을 만들어내기도 하는데, 이는 실제 사람 혹은 이족 보행 로봇의 보행에서는 실현될 수 없는 동작이다. 본 논문에서는 스윙 힙(swing hip)의 각도를 변경하는 피드백 규칙에 스탠스 레그 (stance leg)와의 충돌을 피할 수 있는 추가적인 각도조절을 도입하여 스윙 풋 (swing foot)이 스탠스 풋 (stance foot)을 지난 이후에만 스탠스 풋보다 안쪽으로 움직일 수 있도록 하는 알고리즘을 제안한다. 이를 통해 기존의 제어기 동작 방식에 최소한의 변경과 추가적인 계산만을 더하여 두 다리가 교차하지 않는 안정적인 보행 결과를 만들어 낼 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.765-768
• /
• 2000

Linearization of the biped dynamic equations and design of linear controller for the linearized equations are studied in this paper. The biped robot with inverted pendulum type trunk, used to stabilize the dynamic balancing of the biped robot during dynamic walking period, is modelled with 14 DOF and simulated. Despite of well defined linear control theories so far, the linear control methods was limited to the applications for a walking robot, because they have been inherently strong nonlinear properties, such as a modeling parameter uncertainties, external forces as noise, inertial and Coriolis terms by three dimensional modeling and so on. To linearize the nonlinear equations of motion of biped robot on MIMO and time varying linear equations of motion, 1st order Taylor series is used to formulate the linear equation. And a 2nd order numerical perturbation method Is used to approximate partial differential equations. Using the linearized equations of motion, a linear controller is designed by pole placement method with feed forward compensation. Using the obtained linearized equations and linear controller, the continuous walking simulation is performed.

• 제어로봇시스템학회논문지
• /
• 제15권3호
• /
• pp.306-314
• /
• 2009

The pelvis platform is the mechanical part which accomplishes the activities of diminishing the disturbances from the lower body and maintaining a balanced posture. When a biped robot walks, a lot of disturbances and irregular vibrations are generated and transmitted to the upper body. As there are some important machines and instruments in the upper body or head such as CPU, controller units, vision system, etc., the upper part should be isolated from disturbances or vibrations to functions properly and finally to improve the biped stability. This platform has 3 rotational degrees of freedom and is able to maintain balanced level by feedback control system. Some sensors are fused for more accurate estimation and the control system which integrates synchronization and active filtering is simulated on the virtual environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.559-562
• /
• 2005

When we analyze dynamics of a multi body system, a compliance of joints must be considered. If the virtual model for CAE(computer adied engineering) analysis is not considered compliance, the result of CAE analysis will be very different from the actual result. Especially in a biped walking robot, a compliance can be caused in joints of a walking robot, and the robot may lose walking stability. This paper proposes a compliance modeling method and the effectiveness of the compliance model is verified through experiments.