• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.209-217
• /
• 2023

In this study, the evaluation items related to the effectiveness evaluation of the LVC (Live, Virtual, Constructive) training system of the Air Force were derived and the weights of each item were analyzed. The LVC training system evaluation items for AHP (Analytic Hierarchy Process) analysis were divided into three layers, and according to the level, 3 items were derived at level 1, 11 items at level 2, and 33 items at level 3. For weight analysis of evaluation items, an AHP-based pairwise comparison questionnaire was conducted for Air Force experts related to the LVC training system. As a result of the survey, related items such as (1) Achievement of education and training goals (53.8%), (1.2) Large-scale mission and operational performance (25.5%), and (1.2.1) Teamwork among training participants (19.4%) was highly rated. Also, it was confirmed that the weights of evaluation items were not different for each expert group, that is, the priority for importance was evaluated in the same order between the policy department and the working department. Through these analysis results, it will be possible to use them as evaluation criteria for new LVC-related projects of the Air Force and selection of introduction systems.

• Corrosion Science and Technology
• /
• v.23 no.3
• /
• pp.246-254
• /
• 2024

Recently, coal-fired power plants are experiencing many problems that they have never experienced before due to an increase in flexible operation. In particular, a two-phase flow accelerated corrosion on water wall tubes in a boiler has not been detected overseas or domestically. There is no response plan to deal with such corrosion problem either. However, oxide film damage and tube material corrosion due to a two-phase flow accelerated corrosion are being discovered on water wall boiler tubes of domestic coal-fired power plants recently. If this situation is severe, it can cause enormous damage such as tube rupture. Therefore, in this paper, in order to prepare a response plan for a two-phase flow accelerated corrosion on water wall tubes in the future, differences between a two-phase flow accelerated corrosion and a single-phase flow accelerated corrosion were investigated and an example of discovery of a two-phase flow accelerated corrosion on water wall tubes was presented.

• Journal of Korean Physical Therapy Science
• /
• v.21 no.1
• /
• pp.65-77
• /
• 2014

Purpose : This research is to understand the academic self-efficacy of trainees receiving the 4 category-union education of HIT(Health Integrated Technic) Methods : A self-administered questionnaire survey was conducted in 450 health-related college students in Daegu city from April to July. A statistical analysis was performed using SPSS 17.0 for window version. Results : First, satisfaction to education of HIT was higher in vocational consciousness program than patient care programme educational deepening program. Second, academic self-efficacy to education of HIT was higher in educational deepening program than patient care programme vocational consciousness program. Conclusion : Systemic education is needed to develop vocational consciousness, patient care and educational deepening that suit the characteristics of college students in order to establish an environment for revitalizing satisfaction and academic self-efficacy to 4 category-union education

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.23 no.2
• /
• pp.45-49
• /
• 2017

Background: The purpose of this study was to investigate the effect of structured cryotherapy on edema of patients who had a total knee arthroplasty (TKA). Methods: The subjects were 58 patients who were diagnosed with osteoarthritis and had total knee arthroplasty in D hospital. In total, 29 people were in the leg elevation cryotherapy group (LECTG), 29 people were in the control group (CTG). After TKA, the patients' swelling on post operation days (POD) 3 were checked. After the post OP checking, LECTG was treated with cryotherapy with leg elevation for 12 days but CTG was cryo therapy with sit on chair. Results: Swelling show significant difference within the group (p<.05), but did not show signigicant difference between groups (p>.05). Conclusions: Base on the results, it was found the cryo therapy of $-78^{\circ}C$ improved swelling after TKA. Accordingly, it is thought that cryo therapy of $-78^{\circ}C$ has positive effect on swelling in the process of recovery after operation. but It did not approve that the leg elevation was even more effective. For this study, the reserch developed to enhance the effectiveness of the cryotherapy, would make it possible to apply to an effective cryotherapy posture.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.589-591
• /
• 2002

This paper deals characteristic analysis of brushless motor considering drive type. It is to divide operation with 120$^{\circ}$ and 180$^{\circ}$ conduction and to predict the current waveform and the instantaneous torque of each type using analysis method. The results of the simulation are compared the experiment.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.238-243
• /
• 2004

High temperature air blown gasification is new concept to utilize the waste heat from gasifier that is called the multi-staged enthalpy extraction technology. This process was developed to solve the economic problem due to air separation cost for the oxygen-blown as a gasifiying agent. In this study, we have performed the construction of pebble bed gasifier and operated it by controlling the pebble size and bed height. As a result, we can produce the syngas with the calorific value of 700kcal/$Nm^3$ at the condition of air temperature 650$^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.12
• /
• pp.1010-1017
• /
• 2011

The use of plated front contact for metallization of silicon solar cell may alternative technologies as a screen printed and silver paste contact. This technologies should allow the formation of contact with low contact resistivity a high line conductivity and also reduction of shading losses. A selective emitter structure with highly dopes regions underneath the metal contacts, is widely known to be one of the most promising high-efficiency solution in solar cell processing. When fabricated Ni/Cu plating metallization cell with a selective emitter structure, it has been shown that efficiencies of up to 18% have been achieved using this technology.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.90.2-90.2
• /
• 2010

The crystalline silicon solar cells have been optical losses. but it can be reduced using light trapping by texture structure and anti-reflection coating. The high reflective index of crystalline silicon at solar wavelengths(400nm~1000nm) creates large reflection losses that must be compensated for by applying anti-reflection coating. In this study, the use of porous silicon(PSi) as an active material in a solar cell to take advantage of light trapping and blue-harvesting photoluminescence effect. Porous silicon is form by anodization and can be obtained in an electrolyte with hydrofluoric. We expect our research can results approaching to lower than 10% of several reflectance by porous silicon solar cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.272-272
• /
• 2009

Screen-printing metal contact is typically applied to the solar cells for mass production. And metal paste is used widely for rear contact formation of silicon solar cells. However, Screen-printing solar cell metal paste contact has low aspect ratio, low accuracy, high resistivity, hard control of unclean process. In this paper is to develop resistivity of rear contact for silicon solar cells applications. 4-point prove result, This resistivity of rear contact by Al evaporation was measured about $3.56{\times}10^6{\Omega}{\cdot}cm$ less than screen printed solar cell about $52.6{\times}10^6{\Omega}{\cdot}cm$.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.65-67
• /
• 2010

위치기반서비스(LBS)는 사용자의 위치를 기반으로 다양한 정보제공 서비스를 하고 있다. 최근 연구에서는 단순한 정보제공이 아닌 사용자의 상황인식(Context-Aware)을 통하여 사용자에게 적합한 정보를 제공해주는 지능화된 서비스를 제공하고 있다. 하지만 현재 연구들은 사용자의 기본정보와 선호도정보를 이용한 단일기준 추론을 통하여 사용자에게 정보를 제공해주고 있으며, 이것은 사용자의 다양한 기준의 의사결정을 반영하지 못하는 한계점이 있다. 이러한 한계점을 극복하기 위하여 본 연구에서는 사용자의 정보, 선호도, 공간지리선호도 정보 Ontology를 구축하고, 의사 결정 기준에 가중치를 부여하는 Cost Value Ontology를 구축하여, 다 기준 의사추론을 통해 사용자에게 적절한 추천 결과가 도출되는 Ontology 추론시스템을 제안한다. 사용자들의 개인적인 특성 지식과 공간지리 선호도 지식을 구축할 수 있으며, 이러한 특성으로 구축된 지식 기반 하에 입력된 사용자 정보와 추론을 통하여 이 시스템을 통해 사용자의 선호도 Ontology를 구축할 수 있으며 이를 이용한 추론을 통하여 사용자의 현재상황에 적합한 결과를 도출함을 보였다.