• 제목/요약/키워드: 이임학

검색결과 157건 처리시간 0.024초

가이거모드 영상 LADAR 시스템의 시뮬레이션과 성능예측 (Simulation and Performance Assessment of a Geiger-mode Imaging LADAR System)

  • 김성준;이임평;이영철
    • 한국군사과학기술학회지
    • /
    • 제15권5호
    • /
    • pp.687-698
    • /
    • 2012
  • LADAR systems can rapidly acquire 3D point clouds by sampling the target surfaces using laser pulses. Such point clouds are widely used for diverse applications such as DSM/DTM generation, forest biomass estimation, target detection, wire avoidance and so on. Many kinds of LADAR systems have been developed with their respective purposes and applications. Particularly, Geiger mode imaging LADAR systems are increasingly utilized since they are energy efficient thank to extremely sensitive detectors incorporated into the systems. The purpose of this research is the performance assessment of a Geiger mode imaging LADAR system based on simulation with the real system parameters. We thus developed a simulation method of such a LADAR system by modeling its geometric, radiometric, optic and electronic aspects. Based on the simulation, we performed the performance assessment of a newly designed system to derive the outlier ratio and false alarm rate expected during its operation in almost real environment with reasonable system parameters. The proposed simulation and performance assessment method will be effectively utilized for system design and optimization, and test data generation.

PDP 형광체의 진공 자외선 조사에 따른 열화 특성 (Degradation of PDP Phosphors Under VUV Excitation)

  • 이임렬;이수행;김유혁
    • 한국재료학회지
    • /
    • 제12권9호
    • /
    • pp.735-739
    • /
    • 2002
  • $(Y,Gd)BO_3$: Eu, $Zn_2$$SiO_4$ : Mn and $BaMgAl_{10}$ $O_{17}$ : Eu phosphors used in PDP were continuously irradiated by vacuum ultra violet generated from the penning gas (96%Ar+4%Xe) discharge and then the change of emitting intensity with time was investigated. The brightness of these phosphors decreased exponentially with VUV excitation time. The experimental data showed that the degradation rate increased in the order of $Zn_2$$SiO_4$ : Mn>(Y,Gd)$BO_3$: Eu>$BaMgAl_{10}$ $O_{17}$ : Eu phosphor. This different degradation property of phosphors was interpreted in terms of brightness saturation and stability against VUV irradiation. It was found that the degradation property of $(Y,Gd)BO_3$ : Eu red phosphor synthesized by ultrasonic thermal spray was superior to commercial phosphor.

우리별 1호 지구 관측 영상의 방사학적 및 기하학적 보정 (Radiometric and Geometric Correction of the KITSAT-1 CCD Earth Images)

  • 이임평;김태정
    • 대한원격탐사학회지
    • /
    • 제12권1호
    • /
    • pp.26-42
    • /
    • 1996
  • CCD 지구 영상 실험 장치(CCD Earth Images Experiment, CEIE)는 우리별 1호의 탑재 체중의 하나이다. 우리별 1호가 발사된 후에 CEIE는 이제까지 약 500여장의 세계 곳곳의 지표면 영상을 촬영하였다. 내재한 방사학적(radiometric) 오차 및 기하학적(goemetric) 찌그러짐으로 인 해, 관측된 영상은 지표면의 모습과 아주 다르다. 관측된 영상을 다양한 목적의 응용을 위해 처리 하고 분석하기 전에 이러한 오차를 제거하기 위한 전처리 과정을 반드시 수행하여야 한다. 이 논 문은 우리별 1호가 관측한 영상에 방사학적 및 기하학적 보정을 수행하는 전처리 과정을 설명한 다.

천수국만다라수장(天壽國曼茶羅繡帳) 자수 연구 -한국 고대 자수와의 연관성을 중심으로- (The Connection between the Cheonsuguk Mandala -Embroidery Insignia and Ancient Korean Embroidery-)

  • 이임순;김소희
    • 한국의류학회지
    • /
    • 제47권6호
    • /
    • pp.977-995
    • /
    • 2023
  • This study was aimed at determining the connection between ancient Korean embroidery and the Cheonsuguk mandala-embroidery insignia. Literature and empirical studies were conducted simultaneously, with the scope of these analyses spanning up to 7C in ancient Korea and Japan. The present study confirmed that the structure of Goguryeo tomb murals influenced by Buddhist art is represented in the Cheonsuguk mandala-embroidery insignia, and changes in the image resulted in modifications to the embroidery technique. Embroidery and color composition via complementary color contrast were implemented through Variant 1 outline stitching, which exhibited the development of Baekje embroidery. The embroidery technique confirmed that the form of embroidery developed in to chain stitching, needle looping stitching, outline stitching, satin stitching and Variant 1·2 outline stitching. These findings indicate that Cheonsuguk mandala-embroidery insignia is the result of the integration of the Goguryeo and Baekje cultures.

메타크릴레이트계 4차 암모늄 유도체 고분자 전해질의 감습특 (Humidity Sensitive Properties of Polymer Electrolytes of Quaternary Ammonium methacrylate derivatives)

  • 김태미;공명선;이임열;박정기
    • 한국재료학회지
    • /
    • 제3권6호
    • /
    • pp.598-605
    • /
    • 1993
  • 고분자 전해질의 화학구조가 감습특성에 미치는 효과를 조사하기 위하여 $C_{1}\sim C_{12}$의 알킬,benzy1, 2,2-diethoxy dthy1기가 치환된 메타크릴계 4차 암모늄 단량체들을 합성하였다. 이들의 감습용액을 0.15mm간격의 빗살 모양의 금전극이 인쇄된 알루미나 기판에 마이크로 주사기로 도포하여 광중합 후 상대습도에 따른 임피던스 변화를 측정하였다. 도포된 막의 두께가 증가하면 임피던스는 감소하고, 치환기의 탄소 길이가 증가할수록 임피던스는 증가하였다. $C_6\sim C_8$의 알킬기를 가지는 고분자 전해질의 감습특성은 30-90% RH 범위에서 18M$\Omega$-5K$\Omega$의 직선적인 임피던스 변화를 보였다. 또한 임피던스는 온도 의존성을 보여주며 온도가 증가하면 임피던스가 감소하며 온도 의존성 계수는 -0,45% $RH/^{\circ}C$이다. 히스테리시스는 $\pm$2%RH이내이며, 33%-85% RH 사이에서의 응답 속도는 약 35sec이었다.

  • PDF

Cu-C$u_2$O의 공정반응에 의한 구리와 알루미나의 직접접합 (The Direct Bonding of Copper to Alumina by $Cu-Cu_2$O Eutectic Reaction)

  • 유환성;이임열
    • 한국재료학회지
    • /
    • 제2권4호
    • /
    • pp.241-247
    • /
    • 1992
  • 본 연구에서는 $Cu-Cu_2$O의 공정반응에 의한 구리와 알루미나의 직접접합에 대하여 연구 하였다. $1.5{\times}10^{-1}$torr, $1015^{\circ}C$에서 산화시킨 후 $10_{-3}$torr, 107$5^{\circ}C$에서 접합시킨 시편의 접합력과 계면특성을 인장시험, SEM, EDS 및 XRD를 통하여 분석하였다. 3분 산화시켜 접합하면 우수한 접합강도를 보이며 산화시간이 이보다 짧거나 길면 결합력은 저하하였다. 과단은 알루미나 공정조직 계면에서 발생하였으며 파단후 $Al_2O_3$표면에는 Cu쪽에서 빠져나간 $Cu_2$O nodule의 존재하였는 바 접합력은 $Cu_2$O-A$l_2O_3$계면보다는 $Cu-Cu_2$O계면에 좌우됨을 보여주고 있다. 접합력은 접합시간에 따라 완만한 증가를 보였으며 CuA$l_2O_4$$CuAlO_2$의 반응생성물이 접합중 형성되었다.

  • PDF

라이다데이터를 이용한 디지털항공영상의 자동정합기법 (Automatic Matching of Digital Aerial Images using LIDAR DATA)

  • 민성홍;유병민;이임평
    • 한국측량학회지
    • /
    • 제27권1호
    • /
    • pp.751-760
    • /
    • 2009
  • 본 연구는 영상정합의 주요 과정에 라이다데이터를 적용함으로서 정합과정의 효율성 및 결과의 신뢰도를 향상시키기 위한 전략 및 방법을 개발하는 것을 목표로 하였다. 영상정합은 정합대상객체를 선택하고, 이와 일치된 정합객체를 검색하며, 정합결과의 품질을 평가하는 과정으로 이루어진다. 본 연구는 이러한 영상정합의 각 과정에 라이다데이터를 적용하는 방법을 제시하였다. 제안된 방법을 중해상도 항공 디지털 영상과 이와 동시에 관측된 라이다데이터를 적용하여 실험하였다. 적용된 결과를 라이다데이터 대신에 가상의 수평면을 이용하는 기존의 방법과 대비하여 분석하였다. 그 결과, 제안된 방법이 기존의 방법보다 향상된 성능을 보이는 것을 확인할 수 있었다. 본 연구의 결과는 현존하는 상업용 디지털영상정합자동화 프로그램의 정합성능을 개선하고, 영상정합의 결과를 라이다데이터와 결합하여 생성된 DEM의 품질을 제고하는 것에 기여한다.

시호 약침제제가 생쥐의 면역활성에 미치는 영향 (Effect of Bupleuri Radix Aqua-Acupuncture Solution on Immune Response in Mice)

  • 문진영;임종국;최혜경;이임태;이항우;남경수
    • 생약학회지
    • /
    • 제30권2호
    • /
    • pp.115-122
    • /
    • 1999
  • In order to investigate the effects of Bupleuri Radix aqua-acupuncture solution (BRAS) on immuno suppression induced by glucocorticoid, ICR mice were administrated with glucocorticoid (80 mg/kg) for 7 days, and immunized with hapten, methamphetamine-horseradish peroxidase $(10\;{\mu}g/mouse)$. And then, BRAS (0.2ml/mouse) injected into $CV_4\;and\;BL_{23}$, which are the classical acupuncture points in traditional medicine, for 7 days. And then B and T cells proliferation and cytolytic activity of natural killer (NK) cells were measured. Intraperitoneal injection of glucocorticoid decreased lysozyme activity in macrophage and cytolytic activity of NK cell. B and T cell proliferation were significantly increased in aqua-acupuncture group compared to normal group. On the other hand, BRAS significantly increased the lysozyme activity in macrophage, and the cytolytic activity of purified NK cell on K562. These results suggest that BRAS at $CV_4\;and\;BL_{23}$ may proliferate B and T cells that are suppressed by glucocorticoid and activate NK cell activity.

  • PDF

차량용 라이다 센서의 평가를 위한 범용 시뮬레이터 개발 및 적용 (Development of a General Purpose Simulator for Evaluation of Vehicle LIDAR Sensors and its Application)

  • 임륭혁;최경아;정지희;이임평
    • 대한원격탐사학회지
    • /
    • 제31권3호
    • /
    • pp.267-279
    • /
    • 2015
  • 자율 주행 자동차 개발에 있어서 라이다 센서의 중요성이 커지고 있다. 센서 선정이나 알고리즘 개발을 위해 고가의 라이다 센서를 차량에 탑재하여 다양한 주행 환경에 대해 시험하기에 어려움이 따른다. 이에 본 연구는 다양한 차량용 라이다 센서에 대한 일반화된 기하모델링을 통해 범용적으로 적용될 수 있는 차량용 라이다 시뮬레이터를 개발하였다. 개발된 시뮬레이터를 활용하여 많이 활용되고 있는 특정 센서에 대하여 데이터 시뮬레이션과 품질 검증을 수행하였다. 또한, 생성된 데이터를 장애물 탐지에 적용함으로써 선정된 센서의 활용 가능성을 평가하였다. 이처럼 개발된 시뮬레이터는 센서의 도입 및 운용에 앞서서 다양한 실험을 가능하게 하고, 하드웨어 구축과 병행하여 알고리즘 개발을 도모할 수 있다.

탄소 나노튜브에 담지된 Pt, Pt-Ru 및 Pt-CeO2 메탄올 연료전지 촉매의 특성 (Characteristics of Pt, Pt-Ru and Pt-CeO2 Catalysts Supported on Carbon Nanotubes for Methanol Fuel Cell)

  • 황귀성;이임열
    • 한국재료학회지
    • /
    • 제21권3호
    • /
    • pp.138-143
    • /
    • 2011
  • Nanosized Pt, Pt-Ru and Pt-$CeO_2$ electrocatalysts supported on acid-treated carbon nanotube (CNT) were synthesized by microwave-assisted heating of polyol process using $H_2Cl_6Pt{\cdot}6H_2O$, $RuCl_3$, $CeCl_3$ precursors, respectively, and were characterized by XRD and TEM. And then the electrochemical activity of methanol oxidation for catalyst/CNT nanocomposite electrodes was investigated. The microwave assisted polyol process produced the nano-sized crystalline catalysts particles on CNT. The size of Pt supported on CNT was 7~12 nm but it decreased to 3~5 nm in which 10wt% sodium acetate was added as a stabilizer during the polyol process. This fine Pt catalyst particles resulted in a higher current density for Pt/CNT electrode. It was also found that 10 nm size of PtRu alloys were formed by polyol process and the onset potential decreased with Ru addition. Cyclic voltammetry analysis revealed that the $Pt_{75}Ru_{25}/CNT$ electrode had the highest electrochemical activity owing to a higher ratio of the forward to reverse anodic peak current. And the chronoamperemetry test showed that $Pt_{75}Ru_{25}$ catalyst had a good catalyst stability. The activity of Pt was also found to be improved with the addition of $CeO_2$.