• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.1-11
• /
• 2015

This research was conducted to compare the effect of soil amendment and loess on physial and chemical properties of dredged soil and primary height growth of Ulmus davidiana var. japonica. Three types of research plots: control plot (Dredged soil only), DC treatment plot (Dredged soil + soil amendment) and DCL treatment plot (Dredged soil + soil amendment + Loess) were set at Okgu research site in Saemanguem. 32 trees of U. davidiana var. japonica were planted in each plots after 14 months from the construction. Soil texture, pH, electrical conductivity (EC), organic matter (OM), total nitrogen (TN), available P, exchangeable cation ($K^+$, $Na^+$, $Mg^{2+}$, $Ca^{2+}$) and sodium chloride were measured after 3 years from the construction. Also, survival rate and height of U. davidiana var. japonica were measured 22 months after planting, and the correlation between height of trees and the physico-chemical properties of soil were analyzed. Even though pH in both DC and DCL treatment plots are lower than control plot, they are still alkaline (> pH 8). OM, TN and available P in both DC and DCL treatment were higher than the control. Particularly, the content of available P in both DC and DCL treatment plots are 1.4~5.1 times and 2.0~3.1 times higher than the control respectively. The concentration of exchangeable Mg in DCL treatment plot was 1.1~5.5 times higher than the control (p < .05). The survival rate of the species was the highest in DCL treatment plot (98%) followed by DC treatment plot and the control. The average height of the trees in both DC and DCL treatment plots is 1.1m while the control is 0.8m. OM, TN, available P, K+ were significantly related to the height of U. davidiana var. japonica(p < .01). The results indicate that soil amendment affects on soil physial and chemical properties of dredged soil and height growth of U. davidiana var. japonica.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.284-295
• /
• 2008

For plastics samples, a method using combustion ion chromatography was selected as a method for rapid low-cost analysis to test whether hazardous substances are contained or not. Using combustion ion chromatography, a verification test for F, Cl and Br compounds generated a linear calibration curve with a correlation coefficient of $r^2$ = 0.999~1.000 in the calibration range from 0.5 to 4.0 mg/kg. The detection limits were found to be 0.005~0.024 mg/kg and quantitative limits were found to be 0.014~0.073 mg/kg. The recoveries of combustion ion chromatography using certified reference material (CRM) were found to be 95.5~104.9%. Based on these results, a proficiency test was conducted together with several laboratories in and out of the country, to make comparative analysis of the results from each laboratory. As a result, the data supported the use of combustion ion chromatography as an effective analysis method to deal with regulations for halogen-free electronic products and for other hazardous substances in the electronic products.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.111-121
• /
• 2006

Recently, many studies have been performed to apply airborne LIDAR data to extracting urban models. In order to model efficiently the man-made objects which are the main components of these urban models, it is important to extract automatically planar patches from the set of the measured three-dimensional points. Although some research has been carried out for their automatic extraction, no method published yet is sufficiently satisfied in terms of the accuracy and completeness of the segmentation results and their computational efficiency. This study thus aimed to developing an efficient approach to automatic segmentation of planar patches from the three-dimensional points acquired by an airborne LIDAR system. The proposed method consists of establishing adjacency between three-dimensional points, grouping small number of points into seed patches, and growing the seed patches into surface patches. The core features of this method are to improve the segmentation results by employing the variable threshold value repeatedly updated through a statistical analysis during the patch growing process, and to achieve high computational efficiency using priority heaps and sequential least squares adjustment. The proposed method was applied to real LIDAR data to evaluate the performance. Using the proposed method, LIDAR data composed of huge number of three dimensional points can be converted into a set of surface patches which are more explicit and robust descriptions. This intermediate converting process can be effectively used to solve object recognition problems such as building extraction.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.3
• /
• pp.186-190
• /
• 2013

Soil respiration in forest ecosystems play an important role in global carbon cycle. This study was carried out to determine the annual variation of soil $CO_2$ efflux for 4 years in a broadleaved deciduous forest of the Geumsan (Mt.) Long-Term Ecological Research (GLTER) site in Southern Korea. The soil $CO_2$ efflux in the GLTER site showed annual variations with the fluctuations of annual mean soil temperature, but not with those of soil water content. The annual mean soil $CO_2$ efflux except for winter season was 0.32 g $CO_2\;m^{-2}h^{-1}$ for 2008, 0.40 g $CO_2\;m^{-2}h^{-1}$ for 2009, 0.41 g $CO_2\;m^{-2}h^{-1}$ for 2007, and 0.54 g $CO_2\;m^{-2}h^{-1}$ for 2010. The lowest soil $CO_2$ effluxin 2008 was associated with the lowest soil temperature ($2.0^{\circ}C$) in comparison with those of other years ($13.0-13.5^{\circ}C$). The exponential relationships between monthly soil $CO_2$ efflux and the corresponding soil temperature at the soil depth of 20 cm were significant ($R^2$ = 0.31-0.75, P < 0.05). The results indicate that the annual variation of soil $CO_2$ efflux was attributed to the variations of soil temperature rather than soil water content in the GLTER site.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.573-586
• /
• 2012

Point clouds acquired by a LIDAR(Light Detection And Ranging, also LADAR) system often contain erroneous points called outliers seeming not to be on physical surfaces, which should be carefully detected and eliminated before further processing for applications. Particularly in case of LIDAR systems employing with a Gieger-mode array detector (GmFPA) of high sensitivity, the outlier ratio is significantly high, which makes existing algorithms often fail to detect the outliers from such a data set. In this paper, we propose a method to discriminate outliers from a point cloud with high outlier ratio acquired by a GmFPA LIDAR system. The underlying assumption of this method is that a meaningful targe surface occupy at least two adjacent pixels and the ranges from these pixels are similar. We applied the proposed method to simulated LIDAR data of different point density and outlier ratio and analyzed the performance according to different thresholds and data properties. Consequently, we found that the outlier detection probabilities are about 99% in most cases. We also confirmed that the proposed method is robust to data properties and less sensitive to the thresholds. The method will be effectively utilized for on-line realtime processing and post-processing of GmFPA LIDAR data.

• Korean Journal of Childcare and Education
• /
• v.9 no.6
• /
• pp.417-438
• /
• 2013

This study studies the effect of student teacher's sense of humor, psychological well-being and ego-resilience by general characteristics and by examining the correlation with each other and influences. A sample of 323 student teachers was obtained from a college and a university in the Busan area. This study made use of an research instrument which was a questionnaire for sense of humor(Woo, 2008), psychological well-being(Lee, 2006) and ego-resilience(Park, 1997). For the data analysis connection analysis and regression analysis, SPSS version 18.0 was used. The results of study are as follows. First, student teachers have scores which are above average scores of sense of humor, psychological well-being and ego-resilience. Second, there was a positive correlation between the sense of humor and ego-resilience and a low grade variable of ego-resilience of student teachers and their sense of humor and psychological well-being and between their psychological well-being and ego-resilience. Third, When a multilinear regression analysis was made to confirm which variable would affect ego-resilience, sense of humor and a low grade variable of their was found to exert a statistically significant impact by 5%, and psychological well-being and a low grade variable of their was found to exert a statistically significant impact by 26%. Based on the results, the education training or programs for student teacher to use the sense of humor and psychological well-being should be developed according to the ego-resilience.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.31-38
• /
• 2012

The geo-referencing accuracy of the images acquired by a UAV based multi-sensor system is affected by the accuracy of the mounting parameters involving the relationship between a camera and a GPS/INS system as well as the performance of a GPS/INS system. Therefore, the estimation of the accurate mounting parameters of a multi-sensor system is important. Currently, we are developing a low altitude multi-sensor system based on a UAV, which can monitor target areas in real time for rapid responses for emergency situations such as natural disasters and accidents. In this study, we suggest a system calibration method for the estimation of the mounting parameters of a multi-sensor system like our system. We also generate simulation data with the sensor specifications of our system, and derive an effective flight configuration and the number of ground control points for accurate and efficient system calibration by applying the proposed method to the simulated data. The experimental results indicate that the proposed method can estimate accurate mounting parameters using over five ground control points and flight configuration composed of six strips. In the near future, we plan to estimate mounting parameters of our system using the proposed method and evaluate the geo-referencing accuracy of the acquired sensory data.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.204-211
• /
• 2000

The $(Y,Gd)BO_3:Eu$ red phosphors for PDP application were synthesized by ultrasonic spray method and then their photoluminance properties were investigated under 147nm VUV irradiation. The precursor solution of acetates of Y, GD and Eu and boric acid diluted in water was sprayed using 1.7 MHz ultra-sonic sprayer into the reaction tube held at high temperature. The as-sprayed particles were amorphous phase having C-C and C-H bonds due to the insufficient thermal reaction during the pass along the tube. But the sprayed samples followed by heat treatment at $1100^{\circ}C$ had the same crystal structure and chemical composition as those samples followed by solid state reaction. It was found that the $(Y_{0.7}Gd_{0.3})_{0.95} BO_3:Eu_{0.05}^{3+}$ phosphor particles synthesized by spray at $500^{\circ}C$ and then heat treated at $900^{\circ}C$ had a spherical-like shape and fine particle size at $0.7{\mu\textrm{m}}$ having a narrow size distribution, while the phosphor particles made by solid state reaction was $3{\mu\textrm{m}}$ coarse and non-uniform size distribution. The emitting intensity under 147nm VUV excitation for $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}^{3+}$ phosphor prepared by spray method was found to be higher than those phosphor made by solid state reaction and the commercial $(Y,Gd)BO_3:Eu$ product.

• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.183-195
• /
• 2013

Real-time high-precision image georeferencing is important for the realization of image based precise navigation or sophisticated augmented reality. In general, high-precision image georeferencing can be achieved using the conventional simultaneous bundle adjustment algorithm, which can be performed only as post-processing due to its processing time. The recently proposed sequential bundle adjustment algorithm can rapidly produce the results of the similar accuracy and thus opens a possibility of real-time processing. However, since the processing time still increases linearly according to the number of images, if the number of images are too large, its real-time processing is not guaranteed. Based on this algorithm, we propose a modified fast algorithm, the processing time of which is maintained within a limit regardless of the number of images. Since the proposed algorithm considers only the existing images of high correlation with the newly acquired image, it can not only maintain the processing time but also produce accurate results. We applied the proposed algorithm to the images acquired with 1Hz. It is found that the processing time is about 0.02 seconds at the acquisition time of each image in average and the accuracy is about ${\pm}5$ cm on the ground point coordinates in comparison with the results of the conventional simultaneous bundle adjustment algorithm. If this algorithm is converged with a fast image matching algorithm of high reliability, it enables high precision real-time georeferencing of the moving images acquired from a smartphone or UAV by complementing the performance of position and attitude sensors mounted together.

• Archives of design research
• /
• v.15 no.4
• /
• pp.177-188
• /
• 2002

A thousands of chairs have designed from the Victorian era to the present. Thonet's Nol4 chair in 1859, Wright's high-back chair in 1904, Ritveld's red/blue chair in 1917, Breuer's Wassily chair in 1925, Aalto's Paimio chair in 1932, Eames's DAR chair in 1948, Piero Gatti's Sacco chair in 1969, Starck's Von Volgelsang chair in 1984, Stumpf's Aeron Chair in 1992, Little's 'Coat of arms' chair in 1994 - the list of architects who have seized the opportunity to express their theories in the design of a chair is seemingly endless. Architects such as Machintosh(1868-1928), Wright(1807-1959), Aalto(1898-1976) included chairs within their artistic schemes for interiors and buildings. But as the manufacture of chairs moved away from the domain of the craftsman towards that of the industrial process, architects were also ideally positioned, with their background knowledge of engineering, to pioneer innovative chair design within the constraints of modern manufacturing technology. Beyond matters of function and structure, the fundamental worth of chairs, past or present, lies in their communication of attitudes, ideas and values. The persuasiveness of a chair depend on the clarity of its rhetoric. Chair has become an ideal medium for designers to make their visual statements and construct their individual manifestos. In chair design there is a ping-pong game played out between absurd and useful design, and this game is one way in which the design profession explores itself.