• KSBB Journal
• /
• v.10 no.5
• /
• pp.491-498
• /
• 1995

In order to fraclionate ${\alpha}$-, ${\beta}$- and ${\gamma}$-cyclodextrins(CDs) from CD reaction mixture, various CD adsorbents were manufactured using fatty acids as the ligand molecules and anion exchange resins as matrix. Among several anion exchange resins, DEAE Cellulose was found to be the most suitable matrix for binding fatty acid. The binding stability between DEAE Cellulose and capric acid was tested under the various operation conditions, such as temperature, ethanol concentration, and ionic strength. Specific CD adsorbents manufactured with different chain-length fatty acids, saturated and unsaturated, were compared in terms of the recovery yield and selectivity of ${\alpha}$-, ${\beta}$- and ${\gamma}$-CDs. Stearic acid (C18, saturated) was identified as the most effective ligand for fractionation of ${\alpha}$-CD, and linoleic acid ((C18, unsaturated ) for ${\beta}$-CD. The spacer length between the matrix and ligand was required for effective adsorption of CDs, and the double bond in fatty acid molecules was also acted as an important factor determining recovery yield and selectivity. The elusion patterns of ${\alpha}$- and ${\alpha}$-, ${\beta}$-CD from column packed with stearic acid and linoleic acid CD adsorbents were also investigated at the various elusion conditions for fractionation of ${\alpha}$- and ${\beta}$-CD.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.1
• /
• pp.63-71
• /
• 2012

As nanotechnology is a key industry, there is growing concern relating to the potential risk of nanoparticles. They are known to be released into the environment via various exposure routes. When nanoparticles are present in water environments, they are supposed to be illuminated by ultraviolet light, and the ecotoxicity of photoactive nanoparticles may be changed. In this study, a review of the ecotoxicity of photoactive nanoparticles, including the mechanisms of phototoxicity, are presented. In order to address this issue, studies on the ecotoxicity to soil and water organisms exposed to photoactive nanoparticles were investigated. The photoactive nanoparticles chosen for this study were zinc oxide, titanium dioxide and fullerene. Microorganisms, nematode, earthworm, algae and fish, etc., were chosen to assess the toxicity of nanoparticles using diverse methods. However, studies on the phototoxicity potentially induced by nanoparticles on UV illumination have been reviewed in only 8 studies. From a few studies, photoactive nanoparticles have shown high dissolution rates under UV conditions, with the released ions observed to profoundly influence test organisms. In addition, NPs exposed to UV produced reactive oxygen species (ROS). These ROS can induce oxidative stress in exposed organisms. Evidence of phototoxicity by nanoparticles were found based on previous studies.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1079-1086
• /
• 2000

Pectinesterase inhibitor(PEI) of ripened kiwi fruit(Actinidia chinensis) was separated with affinity chromatography using CNBr-activated Sepharose 4B being covalently bound by orange pectinesterse(PE). The affinity resin strongly and selectively bound PEI, which could be eluted in high yield as a single peak by pH 9.5 without loss of inhibitory activity. The separated PEI had maintained almost inhibitory activity at $-25^{\circ}C$ and $5^{\circ}C$ during 30 days but lost it at room temperature in 4 weeks. The PEI possessed a molecular weight of 16.6 KDa, as estimated by 12.5% SDS-PAGE. PEI had optimum pH of 7.5, optimum temperature of below $10^{\circ}C$ and stability up to $70^{\circ}C$. Also, optimum inhibitory activity for PEI was obtained in 0.2 M NaCl of substrate solutions. The kind of inhibition on tomato pectinesterase was found to be noncompetitive, using citrus pectin as substrate. Fresh orange juice added with crude PEI extracts maintained almost the same cloud stability as pasteurized juice. In case of apple juice, the addition of crude PEI extracts to apple juice had decrease of L-ascorbic acid with nearly no effect on cloud loss.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.2
• /
• pp.90-95
• /
• 2003

This study was carried out to identify of C3G (cyanidin-3-glucoside) from mulberry fruits and quantify with different varieties. C3G of mulberry fruits was extracted with 1％ HCl-MeOH and purified with open column (5${\times}$90cm) which filled with Amberlite IRC-50 ion exchange resin. The $\lambda$max ranges of the purified C3G on UV/vis spectrum were 516nm and 280nm. Also, molecular weight of C3G from mulberry fruits by LC-Mass was determined as 449. From above results, we concluded that anthocyanin pigment of mulberry fruits was C3G only. The cyanidin-3-glucoside (C3G) was separated and quantified by High Performance Liquid Chromatography (HPLC) system using a Nova-Pack C$\_$18/ column. Mean content of the 35 tested accessions was 0.89％. Also fruity characteristics as well as C3G content to select the desirable mulberry varieties for the production of fruit were researched and analyzed. We selected three suitable varieties such as 'Susungppong', 'Kangsun', and 'Jeolgokchosaeng(Chungpuk)'.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.67-73
• /
• 2019

We carried out basic research to evaluate covering material for improving and managing contaminated benthic environments in coastal areas. Changes in nutrient concentration such as phosphate, hydrogen sulfide of contaminated sediment, and pH, Oxidation Reduction Potential (ORP) were investigated through mesocosm experiments for 6 months by covering contaminated sediment with granulated coal ash. Calcium oxide eluted from the granulated coal ash was confirmed to neutralize acidified sediment by increasing pH through hydrolysis. Also, calcium oxide and silica eluted from the granulated coal ash adsorbed and precipitated with phosphate in the sediment. The concentration of phosphate in the sediment investigated decreased by ca. 84.31 %. Similarly, the concentration of hydrogen sulfide decreased by 133.5 mg/L in one month. The hydrogen sulfide is considered to have reacted with substances such as manganese oxide which were eluted from the granulated coal ash and precipitated. Also, it was concluded that the hydrogen sulfide was reduced since anaerobic conditions in the sediment weakened. According to the results of these mesocosm experiments, granulated coal ash was found to be effective to remediate and manage benthic environments by covering the surface layer of sediment.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.574-581
• /
• 2022

Nanofibers comprising reduced graphene oxide (rGO) and Mo₂C/Mo₂N nanoparticles (Mo₂C/Mo₂N rGO NFs) were prepared for a functional interlayer of Li-S batteries (LSBs). The well-dispersed Mo₂C and Mo₂N nanoparticles in the nanofiber structure served as active polar sites for efficient immobilization of dissolved lithium polysulfide. The rGO nanosheets in the structure also provide conductive channels for fast ion/electron transport during charging-discharging and ensured reuse of lithium polysulfide during redox reactions through a fast charge transfer process. As a result, the cell assembled with Mo₂C/Mo₂N rGO NFs-coated separator and pure sulfur electrode (70 wt% of sulfur content and 2.1 mg cm^-2 of sulfur loading) showed a stable discharge capacity of 476 mA h g^-1 after 400 charge-discharge cycles at 0.1 C. Furthermore, it exhibited a discharge capacity of 574 mA h g^-1 even at a high current density of 1.0 C. Therefore, we believe that the proposed unique nanostructure synthesis strategy could provide new insights into the development of sustainable and highly conductive polar materials as functional interlayers for high performance LSBs.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.11-18
• /
• 2023

As the use of lithium-ion secondary batteries is rapidly increasing due to the rapid growth of the electric vehicle market, the disposal and recycling of spent batteries after use has been raised as a serious problem. Since stored energy must be removed in order to recycle the spent batteries, an effective discharging process is required. In this study, graphite and NCM622 were used as active materials to manufacture coin-type half cells and full cells, and the electrochemical behavior occurring during overdischarge was analyzed. When the positive and negative electrodes are overdischarged respectively using a half-cell, a conversion reaction in which transition metal oxide is reduced to metal occurs first in the positive electrode, and a side reaction in which Cu, the current collector, is corroded following decomposition of the SEI film occurs in the negative electrode. In addition, a side reaction during overdischarge is difficult to occur because a large polarization at the initial stage is required. When the full cell is overdischarged, the cell reaches 0 V and the overdischarge ends with almost no side reaction due to this large polarization. However, if the full cell whose capacity is degraded due to the cycle is overdischarged, corrosion of the Cu current collector occurs in the negative electrode. Therefore, cycled cell requires an appropriate treatment process because its electrochemical behavior during overdischarge is different from that of a fresh cell.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.411-419
• /
• 1996

The experiment was aimed to determine a change of chemical component in irrigatted water based on different tillage methods and nitrogen rates under mulching of barley straw in direct seeded rice. There was no difference in water pH of no-tillaged plot but high in tillaged plot until 10 days after treatment. The electric conductivity(EC) of the water was higher in no-tillaged plot than in tillaged plot. However, the dissolved oxygen content was vice versa. The content of NH$_4$-N was high in higher application rate of N fertilizer without the tillage. Mean while, NO$_3$-N content was highly affected by no-till aged plot particularly in between application time and fertilizer rate but not in tillaged plot. There was higher in P043- content with the no-tillaged plot compared to the tillaged plot. It was big difference with higher application rate of the fertilizer. Soil cations were high in much application of fertilizer without the tillage.

• Journal of Conservation Science
• /
• v.23
• /
• pp.11-24
• /
• 2008

A physical characteristics and chemical compositions change by weathering on the granite were examined for the conservation treatment of the Mireuksaji temple stone pagoda. The natural weathered granite was collected from the Mt. Mireuk, and divided into the classification standards based on weathering degrees and strength measured by rock-test hammer. The results from comparison of the strength measured by undestructive rock-test hammer and the strength values converted from ultrasonic velocity showed that each strength measurement value was proportionate. The water absorption of the sample was 1.68 to 0.20%. The F-type of fresh rock was not naturally saturated and the WW-type was naturally saturated but took quite a long time. The water absorption was increased gradually in order of SW-type, the MW-type and the HW-type according to weathering condition. The CW-type samples showed the highest water absorption among the weathered classification samples. Through dyeing test, it was found out that only the feldspar was dyed out of the F-type and the WW-type. The SW-type and the MW-type were distinguished by the fact that plagioclase being dyed. And dyed area was expanded to quartz crack in HW-type and CW-type. Physical change by weathering of the rock-forming minerals could be classified with 3 grades. Through the XRD analysis, albite among the rock-forming mineral showed remarkable decrease. SEM-EDX analysis of the component change in the rock-forming minerals such as biotite, plagioclase, and orthoclase, showed that in case of highly-weathered grade samples compared with fresh samples, contents of the $Al_2O_3$, $K_2O$, $Na_2O$ increase and CaO, MgO decrease in the biotite, the CaO, $K_2O$ increase and $Na_2O$ decrease in the plagioclase, the $Al_2O_3$ a little increase and $K_2O$, $Na_2O$ decrease in the orthoclase. The results of extracted cation analysis using the powder samples of each weathering grade, the CaO, $Na_2O$, $K_2O$ and MgO are highly chemical variations in rock forming minerals and positive variation show high in the weathering grade of the WW-type and CW-type. This research will be used as an importance data to establish a plan for conservation treatment of composed stone in the Mireuksaji temple stone pagoda.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.704-712
• /
• 2006

This research was designed to investigate the removal of heavy metals, such as $Al^{3+}$, $Cu^{2+}$, $Mn^{2+}$, $Pb^{2+}$ and $Zn^{2+}$, by adsorption on clay minerals. Bentonite(Raw-Bentonite), $Ca^{2+}$ and $Na^+$ ion exchanged bentonite(Ca- and Na-Bentonite) and montmorillonite, such as KSF and K10 from Sigma Aldrich, were used as adsorbents. The component of five inorganic adsorbents was analyzed by XRF, and the concentration of metal ions was measured by ICP. The cation exchange capacity(CEC) and the particle charge of adsorbents were measured. The initial concentration range of metal ions was $10{\sim}100$ mg/L. From the experimental results, it was shown that the adsorption equilibrium was attained after $1{\sim}2$ hours. The maximum percentage removal of $Al^{3+}$, $Cu^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ on Na-Bentonite were more than 98% and that of $Mn^{2+}$ was 66%. $Al^{3+}$ was leached out from KSF with the higher concentration of hydrogen ion. Percentage removals of $Pb^{2+}$ and $Zn^{2+}$ on KSF were 88% and 59%, respectively. In general, the percentage removal of metal ions was decreased with the higher initial concentration of metal ions. The adsorption capacity of metal ions on Na-Bentonite was $1.3{\sim}19$ mg/g. Freundlich equation was used to fit the acquired experimental data. As the results, the adsorption capacity of metal ions was in the order of Na-Bentonite$\gg$Raw-Bentonite$\cong$K10>Ca-Bentonite>KSF. Freundlich constant, K of Na-Bentonite was the largest for metal ions. The order K of Na-Bentonite was Al>Cu>Pb>Zn>Mn, and the adsorption intensity(1/n) was determined to be $0.2{\sim}0.39$.