• Korean Journal of Ichthyology
• /
• v.22 no.4
• /
• pp.256-266
• /
• 2010

The distribution characteristics of the eggs and larvae of anchovy Engraulis japonica, and environmental factors in the southern coastal waters of Korea were investigated from May to August 2009. Eggs and larvae were mainly distributed in the waters off Naro Island, Namhae Island and Saryang Island. High densities of eggs and larvae in temperatures of $19.0{\sim}24.0^{\circ}C$, salinites of 33.0~34.4 psu, DO of 6.05~8.13 mg/L and chlorophyll-a $1.2{\sim}2.3{\mu}g/L$ were observed. Water temperature in the coastal region was higher than that in the open sea, while salinity was lower. Evidence of sea water intrusion toward Sori Island and Maemul Island, and an inner-water intrusion from Yeoja Bay, Gamak Bay and Gwangyang Bay were observed. High densities of eggs in early developmental stage occurred in waters off Naro Island, Dolsan Island and Namhae Island, but high densities of eggs in a later developmental stage occurred in waters off Yokji Island and Maemul Island. During the survey period, the proportion of later developmental-stage eggs was higher in the eastern part of the study area.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.75-86
• /
• 2002

This paper presents sedimentation and consolidation characteristics of dredged soils mixed with sand materials through the self-weight consolidation tests adopting stepwise filling method. After completely throwing away dredged soils daily by flour kinds of S-C, which is the quantity of sand contained, results fi:om laboratory tests are compared with those from a new method using hyperbolic, which considers stage settling and consolidating characteristics, and those from the existing analyzing method. Liquid limit up to 65% had a large effect on consistency properties. Assuming that the settlement occurred only by clay content of dredged soils, it is shown that the clay void ratio is less than 2 and 4 respectively in case S-C is 0% and 50%. In the applied hyperbolic method, reinitialized curve has a linear behavior of a coefficient of correlation of almost 1, and the coefficient of slope and intercept except fur the specimen with the height of 10cm and 20cm had a tendency to fellow exponent function and a shape of zone settling and dispersing settling. The results computed by the applied hyperbolic method rather than the existing analyzing method coincide with those of laboratory tests. It is shown that the former is more suitable than the latter for the area considering the influence, of sand materials.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.127-134
• /
• 2020

When a pregnant woman experiences cardiac arrest, resuscitation is of the utmost importance. Cardiac arrest in pregnant women differs from cardiac arrest in the general population since both mother and fetus need to be taken into consideration. In the event of cardiac arrest, determining whether to deliver the baby is significant. Cardiopulmonary resuscitation is not always successful, and the survival rate depends on the speed and precision of the procedure. In this study, we focus on the case of a 30-year-old pregnant woman who experienced cardiac arrest and whose family was quick to perceive her condition and call the hospital. A witness performed initial cardiopulmonary resuscitation, while rescue workers performed the advanced procedure. In this case, the patient and baby received proper treatment and left the hospital after six days. It is extremely rare for a pregnant patient to achieve return of spontaneous circulation (ROSC) or receive advanced cardiac life support before reaching the hospital. However, the woman in question in this study achieved ROSC and received both cardiopulmonary resuscitation before reaching the hospital and advanced cardiac life support at the hospital. The specifics of the case are reported in the context of a literature review.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.138-146
• /
• 2018

Photodynamic therapy (PDT) is a great potential approach for the localized tumor removal with fewer metastatic potentials and side effects in treating the disease. In the treatment process, a photosensitizer (PS) that absorbs a light energy to generate reactive oxygen is essential. In general, a visible light is used as a light source of PDT, so that side effects from the light source are inevitable. For this reason, upconversion nanoparticles (UCNPs) using near-infrared (NIR) as an excitation source are attracting attention in the field of disease diagnosis and treatment. UCNPs have the low cytotoxicity and phototoxicity, and also advantages such as deep tissue penetration and low background autofluorescence. For PDT, UCNPs should be combined with a PS which absorbs the light energy from UCNPs and transfers it to the surrounding oxygen to produce reactive oxygen. In addition, the therapeutic efficacy can be improved by modifying nanoparticle surfaces, adding anti-cancer drugs, or combining with photothermal therapy (PTT). In this review, we summarize the recent research to improve the efficiency of PDT using UCNPs.

• Journal of Chest Surgery
• /
• v.43 no.1
• /
• pp.104-107
• /
• 2010

Acute respiratory distress syndrome (ARDS) is difficult to treat and it is often fatal. If the medical treatment for ARDS is not effective, then extracorporeal membrane oxygenation (ECMO) can be applied to the patient. A 22-year-old female who suffered multiple traumatic injuries due to a car accident presented with acute respiratory distress syndrome. Veinarterial extracorporeal membrane oxygenation (VA ECMO) was started to treat her respiratory failure. With the VA ECMO, the systemic oxygen saturation remained at only 84%, and so the ECMO system was switched to V-VA ECMO via an additional venous outflow through the right jugular vein to increase both the systemic and pulmonary oxygen saturation. After conversion to the V-VA type ECMO, the systemic oxygen saturation increased to 94% and the partial pressure of oxygen ($PaO_2$) increased to 65 mmHg. We report here on a successful case of ECMO conversion from the VA type to the V-VA type in a patient with severely hypoxic respiratory failure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.698-701
• /
• 2007

지하수 개발가능량 산정을 위한 함양량의 평가는 수문계의 물리적인 형태나 함수층의 수리성 분석 및 수직인 지질분포를 파악하여 어떤 조건하에서 물이 유입 유출되는가를 파악한 후에만 가능하다. 또한 지하수계의 물리적인 형태를 이해함으로써 조사지역의 지표수계나 지하수계의 양계를 통해서 흐르는 물의 양을 결정짓는 물수지 분석이 수행되어야 한다. 이에 따라 강수량, 증발산량, 지하수 유출량, 지표유출량 그리고 하천유출량 등을 수문학적으로 고려해야만 한다. 본 연구는 지표수-지하수 결합모형을 도입하여 분포형 지하수 함양량의 시공간적인 변동성을 파악하는 데 그 목적이 있다. 이를 위해 지표수-지하수 결합모형인 SWAT-K모형을 미호천 유역에 적용하였으며, 지표수의 총유출량과 지하수위의 공간분포자료를 이용하여 검정과 검증을 수행하였다. 전체유역에 대한 연평균 함양량은 수문총량의 약 19%인 것으로 나타났다. 1999년${\sim}$2004년까지의 소유역별 연간 함양량 결과를 월별로 나타냈으며, HRU(Hydrologic Response Unit)별 함양량의 공간분포를 통해 월별, 계절별 특성을 살펴볼 수 있었다. 소유역 모두 강수가 집중하는 7-9월에 걸쳐 많은 함양이 이루어지며 $1{\sim}3$월에는 상대적으로 함양이 적은 것을 볼 수 있다. 월함양량의 경우 최대 약200mm범위내에서 유역의 토지이용 및 토양특성, 경사등에 따라 매우 비균질하게 분포하는 것을 확인할 수 있었다. 이와같은 함양량의 시공간적 불균일성으로 인해 지하수 관리방안은 소유역별 함양특성을 반영해야 할 것으로 판단된다.의 종분산지수가 일반적인 자연대수층에 비해 9.1배 정도 높다는 것을 의미한다. 이는 시험대수층의 투수성이 매우 높아 염소이온의 용질이송이 매우 빠르게 발생되었기 때문이다. 본 연구에서 추정된 종분산지수를 Gelhar et al.(1992)의 연구 결과와 비교 분석한 결과에서도 시험규모에 비해 매우 높은 수리분산이 발생된 것으로 나타났다. 그리고 염소이온의 확산면적을 추정하기 위해, 수렴흐름 추적자시험에 의한 종분산지수와 시험대수층의 평균선형유속을 이용하여 종분산계수를 구하였다. 현장에서 수행된 양수시험에 의한 평균선형유속 22.44 m/day와 평균 종분산지수 0.4155 m를 적용하여 산정된 종분산계수는 $9.32\;m^2/day$이었다. 따라서, 시험부지 내 충적층에서 일정한 양수율$(2,500\;m^3/day)$로 지하수를 개발할 시에 양수정 주변지역으로 유입되는 염소이온의 확산면적은 1일 $9.32\;m^2$ 정도일 것으로 나타났다.적인 $OH{\cdot}$ 의 생성은 ascorbate가 조직손상에 관여할 가능성을 시사하였다.었다. 정확한 예측치를 얻기 위하여 불균질 조직이 조사야에 포함되는 경우 보정이 요구되며, 골반의 경우 골 조직의 보정이 중요한 요인임을 알 수 있었다. 이를 위하여 불균질 조직에 대한 정확한 정보가 요구되며, 이는 CT 영상을 이용하는 것이 크게 도움이 되리라 생각된다.전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을 개발하였다.enin과 Rhaponticin

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.29-37
• /
• 2012

This study is to find out the characteristics of the behavior of Geosyntehtic Reinforced Retaining Earth Wall(GRREW) through the laboratory experiment with the reduced-scale model, and to verify the effect of reinforcement by materials of GRREW. The loading tests after combining nonwoven geosynthetic, re-bar mesh nets and drainage blocks respectively among the components of the GRREW were performed in three cases of their slopes. In the cases of the behavior analysis including all of the components of the GRREW, the maximum horizontal displacement was generated 8.4mm at the location of 0.57H in the slope of 1:0.3; 3.8mm at the location of 0.57H in the slope of 1:0.6; 3.6mm at the location of 0.86H in the slope of 1:1.0. On average, the horizontal displacements of the GRREW were reduced by 83.8% against those of the original slopes. Lastly, seepage analysis and slope stability analysis were performed by modelling section of field, to confirm the effect of installation of drainage block in GRREW. We can confirm to compare increasing the slope safe factor and decreasing ground water in accordance with drainage blocks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.329-331
• /
• 2018

In this paper, we propose a monitoring system that starts with the supply of raw materials for threading, is processed into a lathe machine, and checks for defects of the product are automatically performed by the robot with Smart Factory technology through assembly and disassembly. Completion check according to the production instruction quantity and production instruction is made by checking the production status according to whether or not the raw material is worn by the displacement sensor, and checking the pitch and the contour of the processed female and male to determine OK and NG. The robotic system acts as a relay for loading and unloading of raw materials, pallet transfer, and overall process, and it acts as an intermediary for organically driving. The location information of the threaded products is collected by using the non-contact wireless tag and the energy saving system Production efficiency and utilization rate were checked. The environmental sensor collects the air-conditioning environment data (temperature, humidity), measures the temperature and humidity accurately, and checks the quality of product processing. It monitors and monitors the driving hazard level environment (overheating, humidity) of the product. Controls for CNC and robot module PLC as a heterogeneous system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2016

The application of titanium has been gradually rising because the utilizing ranges for low weight and high strength are rapidly increased by the need for improving the fuel economy in production industries such as the aviation and automotive in recent. The purpose in this study is to investigate the appropriate cutting conditions on the life of flat and round end mills by measuring the maximum cutting temperature relative to the machining time, and calculating the wear rates of cutting tool with the spindle speed and feed rate of vertical machining center as a parameter in the titanium roughing cut machining which is widely used in critical parts of aircraft, cars, etc. When the wetted roughing cut machining of titanium with a soluble cutting oil is conducted by the flat and round end mills, the maximum cutting temperatures for a variety of spindle speed and feed rate are measured at ten-minute intervals during 60 minutes by an infrared thermometer, and the wear rates of cutting tool are calculated by the weight ratios based on tool wear before and after the experiment. It is found that the maximum cutting temperature and the wear rates of cutting tool are raised as the cutting amount per tool edge is increased with the rise of feed rate, in this experimental range, and as the frictional area due to the rise of contacting friction numbers between tool and specimen is increased with the rises of cutting time and spindle speed. In addition, the increasing rate of maximum cutting temperature in the flat and round end mills are the highest for the cutting time from 50 to 60 minutes, and the wear rate of cutting tool in the flat end mill is 1.14 to 1.55 times higher than that in the round end mill for all experimental conditions.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.888-894
• /
• 1998

In order to investigate the radioprotective effect of Si-Wu-Tang (Korean name: Sa-Mul-Tang), a kind of traditional Oriental medicine as a blood-building decoction (Oriental medical concept: Bu-Xie), and Si-Jun-Zi-Tang (Korean name: Sa-Gun-Ja-Tang), one of the widely used Oriental herbal medicines as an energy tonic (Chinese medical concept: Bu-Qi). the jejunal crypt survival, endogenous spleen colony formation, and apoptosis in jejunal crypt cells were observed in irradiated mice. Jejunal crypts were protected by Si-Wu-Tang pretreated both per os (2 mg/mL of drinking water for 7 days, p<0.05) and intraperitoneally (1 mg/head, single injection at 24 hours before irradiation). Si-Wu-Tang adminstration before irradiation(1 mg/head, single injection at 24 hours before irradiation) resulted in an increase of the formation of endogenous spleen colony (p<0.005). The frequency of radiation-induced apoptosis in intestinal crypt cells was also reduced by pretreatment of Si-Wu-Tang (p<0.01). However, the radioprotective effect of Si-Jun-Zi-Tang was not as significant as that of Si-Wu-Tang. These results suggest that Si-Wu-Tang may be a useful radioprotective food, especially since it is a relatively nontoxic natural product.