• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1314-1323
• /
• 2010

In this study, we constructed various kinds of binary vectors with the pPZP backbone for co-overexpression, tissue- or development-specific expression and stress-inducible expression, and validated them for ectopic expression of target genes. Using a modified CaMV 35S promoter, a binary vector was generated for co-overexpression of two different genes and was confirmed to be efficient for overexpressing two different target genes at the same time and place. Binary vectors containing At2S3, KNAT1 or LFY promoters were constructed for tissue-specific or development-specific gene expression, and the binary vectors were suited for embryo/young seedling stage-, shoot apical meristem- or leaf primordia-specific expressions. Furthermore, the binary vectors containing RD29A or AtNCED3 promoters were validated as suitable vectors for gene expression induced by abiotic stresses such as high salt, ABA, MV and low temperature. Taken together, the binary vectors constructed in this study would be very useful for analyzing the biological functions of target genes and molecular mechanisms through ectopic expression.

• Journal of Chest Surgery
• /
• v.41 no.2
• /
• pp.292-294
• /
• 2008

Diffuse pulmonary ossification is a rare entity which was reported just a case in Korea, defined as "wide spread heterotropic bone formation within the lung parenchyme", and it's pathogenesis remains unclear. Generally, diffuse pulmonary ossification is diagnosed by autopsy because most of case is asymptomatic, and classified as either nodular and dendriform diagnosed pathologic examination. We reviewed a case of diffuse dendriform pulmonary ossification with spontaneous pneumothorax.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.899-909
• /
• 2023

In this study, the material scientific characteristics of Hobun pigments used as white inorganic pigment for traditional cultural heritage were identified according to the type of shell and calcination and evaluated the stability of the preservation environment. For the purpose of this, we collected 2 different types of Hobun pigments made by oyster and clam shell and its calcined products(at 1,150℃). Hobun pigments before calcined identified calcium carbonate such as calcite, aragonite but calcination derived changing main composition to portlandite and calcite. Results of FE-SEM showed characteristics microstructure for each shell but pigments after calcined observed porous structure. Porous granule highly caused oil adsorption according to increase specific surface area of pigments. In addition, the whiteness improved after calcined pigments compared to non-calcined pigments, and the color improvement rate of Hobun pigment (CS) which made of clam shell was higher. As a result of the accelerated weathering test, the Hobun pigment-colored specimen had a color difference value of less than 2 after the test, which was difficult to recognize with the naked eye. In particular, the color stability has improved as the color difference value of the Hobun pigment is smaller after calcined compared to before non-calcined pigment. However, it was confirmed that the stability of the painting layer was lower in the specimen after calcined pigment. For antifungal activity test, Aspergillus niger, Tyromyces palustris and Trametes versicolor were used as test fungi, and all pigments were found to have preventive and protective effects against fungi. Especially, the antifungal effect of the calcined pigment was excellent, which is due to the stronger basicity of the pigment.

• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.197-212
• /
• 2020

This study was carried out material characteristics and firing conditions for some potteries in early and middle Neolithic period at the Munamri sites, where the first farmland remails were found in Korea. It is divided into six kinds of surface patterns for potteries such as the raised, bamboo tube and red painted (patternless) from the early Neolithic period (BC 4000 to 6000), and the patterns of horizontal herringbone, short slanted lined or lattice and incised thick line in the middle Neolithic period (BC 3000 to 4000), respectively. Based on the color measures, redness and yellowness of potteries were relatively high as condition of oxidation firings, were also observed black cores on the cross section of potteries. The firing temperature is divided into two groups having under 800℃ and 800to 900℃, the difference in patterns of the potteries are not confirmed. As a microtextures, the bamboo tube pattern potteries show the sericitization biotite, the quartz have developed a suture line textures, and altered alkali feldspars are occurred. X-ray diffraction analysis shows that the main minerals contained in potteries are chlorite and amphibole besides quartz, alkali feldspar and biotite. Considering the geology around the Munamri area is the biotite amphibole granite and soil layers within 10km radius are used as the raw materials for the potteries. The raw materials are presumed that the sources from the metamorphic rocks along the water systems through the mountains around the sites on the basis of well developed suture line textured quartz in potteries. Results on normalized geochemical compositions, the potteries by surface patterns are very similar to sources, and it is judged that was made by using the surrounding soils despite the long time difference from the early to middle in the Neolithic period.

• Transactions of Materials Processing
• /
• v.1 no.2
• /
• pp.32-39
• /
• 1992

대형 강괴의 자유단조 공정 중에서 코깅(cogging)작업은 강괴 단조의 초기에 단면을 줄이면서 길이 방향으로 늘리는 작업이다. 코깅 작업의 역활은 주조시 발생하는 강괴 내부의 기공을 압착시켜 제거하며 주조 조직을 파괴하여 물성치를 균질화하고 향상시키는 것이다. 그러나 대형강괴의 작업에는 제약조건이 많이 있고 작업공정에서 공정변수도 여러가지 이다. 따라서 본 논문에서는 변형해석과 온도해석을 할 수 있는 3차원 열-점소성 유한요소해석 프로그램을 개발하고, 코깅공정에서 다이의 형상과 다이폭, 다이 겹침과 엇갈리기, 강괴의 온도 구배, 압하 깊이와 패스 설계등의 여러 공정 변수의 영향을 해석하여, 단조 효과를 최대화하는 최적의 단조 공정을 예측하여 공정개선에 적용하는 것이 목적이다.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.311-324
• /
• 2010

The purpose of this study aims to reveal characteristics of reproduced potteries which made with clays of various chemical compositions in different firing temperatures and thereafter to provide comparative samples for identifying the manufacturing techniques of earthenwares from archaeological excavation by reproducing and characterizing sample under controlled conditions. For this study, various samples of earthenware are reproduced using different types of raw clays at several different firing temperature, followed by physical and structural characterization. Chemical specification were varied from different types of clay, which were calculated by Seger formula, and four different types of clay were selected based on different mole ratio of acidic oxide. The temperatures of firing of 7 samples were varied between $600^{\circ}C$ to $1200^{\circ}C$ at the interval of $100^{\circ}C$ for each sample. The result of analysis revealed that each reproduced earthenware has different chemical compositions divided into two groups: 1. Sample Y(6.10) and Sample G(5.85) clay; 2. Sample H(3.41) and Sample S(2.85) clay. The former which has higher mole ratio of acidic oxide than the latter, shows higher level of rockwell hardness at the same firing temperature. In addition, all four samples presented that as the firing temperature was increased, absorption rates of Y and G were abruptly dropped at $1200^{\circ}C$. Furthermore the more mole ratio of acidic oxide increase, the more microtexture of samples were vitrificated. Such result reveals that mole ratio of acidic oxide influence physical and microtextural characteristics of earthenwares, and it can be used as the comparison data in the understanding of manufacture techniques for the earthenwares of similar chemical composition.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.3
• /
• pp.261-277
• /
• 2009

This study is aimed to emphasize the significance of ore selection in lime manufacturing through the evaluation of applied-mineralogical impact factors of crude ores controlling calcination characteristics for some domestic limestones used currently for lime manufacturing. To do this work, systematic characterization and determination were carried out for the limestone ores and their calcination products in a fixed calcining condition (target temperature: $1000^{\circ}C$, retention time: 30 minutes, 2, 4, 10, 16 hours), and the results were correlated and discussed. Selected high-Ca limestones in this study are as much as > 98 wt%, but they are somewhat diverse in crystallinity, texture, and impurity composition. Synthesized quicklimes are varied depending on such a difference in ore characters. The Pungchon limestone has relatively very low calcination rate, and the limestones from the Gabsan formation and the Jeongseon formation exhibit good quality in calcination rate and decrepitation. Among these samples, the limestone ore from the Jeongseon formation is evaluated to be the best for crude ore in manufacturing of highly-reactive quicklime. In addition, it is characteristic that the Gabsan limestone comparative rich in Fe-bearing mineral such as pyrite and goethite is more conspicuous in sintering effect.

• Journal of Chest Surgery
• /
• v.40 no.11
• /
• pp.802-804
• /
• 2007

Although intrathoracic liver in association with a congenital diaphragmatic hernia has been well documented, the finding of intrathoracic ectopic liver tissue in the presence of an intact diaphragm is an extremely rare congenital anomaly. We have experienced a case of intrathoracic ectopic liver without any diaphragmatic hernia. A 37-year-old woman was admitted for the treatment of an incidentally detected right lung mass, A chest computed tomography scan revealed a right lower lobe lung mass close to the diaphragm, and this was suspicious for bronchial carcinoid tumor. Upon surgery, 2 round solid masses $3.5{\times}3.5 cm$ and a $2.0{\times}2.0 cm$ in size were noted, with their bottoms attached to the diaphragm dome. The masses were completely resected. Histologically, they were confirmed to be intrathoracic ectopic livers. The patient had an uncomplicated postoperative course.

• Journal of the KSME
• /
• v.28 no.4
• /
• pp.313-321
• /
• 1988

어떤 구조물이 반복하중을 받으면 피로파괴를 일으킨다. 만일 이 구조물이 부식환경 속에 앗 으면 불활성 분위기나 공기 중에서 보다 빨리 파괴에 이르게 된다. 이러한 현상을 흔히 부식 피로라고 한다. 부식피로에 크게 영향을 미치는 변수들을 대략 기계적 변수, 금속학적 변수, 환경 변수로서, 기계적 변수에는 최대응력 확대계수, 응력확대계수범위, 응력비, 반복하중 주파수, 반복하중파형, 응력상태, 잔류응력, 균열의 크기 및 모양 등이 있으며 금속학적 변수로는 합금 조성, 합금원소와 불순물의 분포, 미세조직과 결정구조, 열처리, 소성가공, 집합조직 등이며 환 경변수에는 온도, 환경의 형태(기체, 액체), 부식성분의 분압 또는 농도, 전기화학적 전위, pH, 수용성 환경의 점성, 피복, 부식억제제 등이 있다. 이와 같이 부식환경 속에 있는 구조물의 파 손을 이해하기 위하여는 응력부식과 부식피로를 공부하여야 한다. 이 현상은 매우 복잡한 문 제이기 때문에 아직도 완전히 이해되지 않은 상태이고 따라서 중요한 연구대상이 되고 있다. 여기서는 응력부식과 부식피로의 파괴역학적인 측면을 소개하고자 한다.

• Journal of the KSME
• /
• v.28 no.4
• /
• pp.328-336
• /
• 1988

파괴인성은 내적 및 외적요인 등에 의해 변할 뿐만 아니라 조직의 불균질성 때문에 소성둔화 및 파괴가 균일하게 일어나지 않으므로 이에 대응한 파괴인성을 선택하여 평가함이 가장 중요하다. 또한 기계의 고속화에 따라 충격적인 하중에 의한 동적파괴의 문제가 중요하게 되고 이에 따라 동적파괴인성 평가법의 확립에도 많은 연구가 필요하다. 한편 피로균열진전거동의 실험에는 많은 시간과 인적 노력이 필요로 하며 이러한 문제점을 해결하여 균열진전 측정의 정밀화 및 효율성을 높이기 위해서는 컴퓨터의 이점을 적극적으로 응용할 필요가 있다.