• 대한핵의학회:학술대회논문집
• /
• 대한핵의학회 1992년도 제31차 춘계학술대회
• /
• pp.183.1-183.1
• /
• 1992

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2006년도 한국육종학회 공동심포지엄 및 학술대회
• /
• pp.30-30
• /
• 2006

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2019년도 춘계학술대회
• /
• pp.61-61
• /
• 2019

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.62-64
• /
• 2001

In this paper, we present the fabrication and performance of tunable capacitors with various structural geometry of plates. Experimental devices have been fabricated using Cu-electroplating techniques and standard MEMS techniques. In particular, the thickness of electroplated Cu is designed below $0.5{\mu}m$ for lower actuation voltage. The fabricated tunable capacitors has been tested from $OV{\sim}42V$ and achieves a tuning ratio of $46%{\sim}64.2%$.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.808-815
• /
• 2003

Fieldbus technology is having a massive impact on the development of faster, smarter and less expensive industrial networking systems. However, there have been a few of practically applied cases and channels for obtaining technical advices. Moreover, the users in the industry don't trust the Fieldbus technology like they didn't trust PLC control system in 1970s. Therefore, in this paper, Air flow control system is constructed by Fieldbus technologies, Profibus and Inverter that controls the motor speed. With the features of the motor control, the amount of electric power consumption by the speed control of motor is measured by the constructed control system. From this measured result, the effectiveness of the airflow control system and Feasibility to the practical industry field is demonstrated To improve the confidence of Fieldbus technology, practically embodied cases and technical methods are presented.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 추계학술대회
• /
• pp.129-134
• /
• 2005

VMI(Vendor Managed Inventory)가 사회적인 관심사로 부각되고, 전 부분으로 확산 되고 있음에도 불구하고 VMI의 도입적용에 관한 연구 및 문헌자료는 찾아보기 힘들 정도로 부족한 실정이다. VMI에 관한 연구의 대부분이 재고기법에 관한 응용연구에 편중되고, 공급체인상의 하부기능으로 일부 언급되었을 뿐, 공급체인상의 프로세스를 중심으로 VMI의 실증연구가 이루어진 자료는 전무한 실정이다. 이러한 상황에서 VMI의 도입 구축 프로젝트추진을 계기로 VMI의 적용에 따른 물류 프로세스 개선에 관한 연구를 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.644-647
• /
• 2003

Resulting from reproducibility and possibility of mass production. many researches to fabricate micro lens array using lithography have been developed. However, it still remains the level of fabricating compensation lens. Therefore, to realize the fabrication of lens having high numerical aperture can be the key technology of ultra slim optical system. Reflow phenomenon have been researched to make lens having high refractive power. And through those researches, the possibility to fabrication of high refractive power lens has been investigated. In this paper, we analyze the effect of many parameters in reflow process to get an aspheric shape with high repeatability. And we make possible to estimate shape error, through we give direct information about decrease in volume of photoresist.

• 대한전자공학회논문지
• /
• 제26권9호
• /
• pp.1375-1380
• /
• 1989

Mobility reduction parameters are extracted using a method based on the exploitatiion of Id-Vg and Gm-Vg characteristics of short channel n-MOSFETs in strong inversion region at room temperature. It is found that the reduction of the maximum field effect mobility, \ulcornerFE,max, with the channel length is due to i) the difference between the threshold voltage and the gate voltage which corresponds to the maximum transconductance, and ii) the channel length dependence of the mobility attenuation coefficient, \ulcorner The low field mobility, \ulcorner, is found to be independent of the channel length down to 0.25 \ulcorner ofeffective channel length. Also, the channel length reduction, -I, the mobility attenuation coefficient, \ulcorner the threshold voltage, Vt, and the source-drain resistance, Rsd, are determined from the Id-Vg and -gm-Vg characteristics n-MOSFETs.

• 대한전자공학회논문지
• /
• 제27권1호
• /
• pp.74-80
• /
• 1990

The transconductance of short channel LDD MOSFETs in the saturation region (high Vd)has shown different characteristics from that of conventional device. The transconductance in saturation regime of short channel LDD MOSFETs is reduced from maximum value at higher gate voltage. This decline is analyzed as the velocity saturation effects of carrier at LDD region but accurate analytical expressions for the drain current Idsat and the transconductance Gmsat in the saturation regime are still not in existence. Recently the drain current dependence of parasitic source resistance Rs has been modeled from the velocity saturation of carriers in LDD region. In this study, we approximate that Rmsat that Rs is linearly dependent on the applied gate voltage. Analytical expressions for Idsat and Gmsat obtained from this approximation show the same general behavior as experimental results of short channel LDD NMOSFETs.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.179-198
• /
• 2005

The purpose of this study is to propose a strategic approach to improve firms competitive advantages by selecting main business body and business sector at the same time. In this study the strategy of an efficient business model for joint logistics is suggested by means of searching for a joint program. The methods applied to this study were literature survey, questionnaire and internet information as well as case studies on advanced domestics and foreign logistics enterprises. The research scope of this study has focused on the joint logistics of SMEs being in the DVD(Digital Video Disk) industry sector. The results of this study are shown as follows ; first, in short terms, main business operating body has, second, in long terms, logistics operating enterprise has a direct effect on the joint logistics operation strategy of the DVD(Digital Video Disk) industry in Korea. The conclusion of this study shows that this method as a model of consequence to increase the joint logistics implementation successfully.