• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.190-193
• /
• 2007

Present study examines the experimental results of polycyclic hydrocarbons compound prepared by norbornadiene dimerization reaction. Pentacyclic exo-t-exo, hexacyclic exo-endo, hexacyclic endo-endo isomers of NBD dimer were synthesized by selective dimerization of NBD monomer. Dimerization catalysts, reaction procedure and product analysis method were developed respectively. Through this experiment, mild reaction conditions, relatively high NBD dimer yields were obtained and this reaction technologies will be usefully applied to high energy density liquid fuel development.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.797-799
• /
• 2010

In preparation of NBD dimer, one of the industrially useful multicyclic hydrocarbon compound, various catalyst, solvent and byproducts were included in reaction product at the end of dimerization reaction. In order to increase the yield of NBD dimer mixture, first of all, effective separation process development was required. The research for improvement of NBD dimer yield were performed by use of eco-friendly and recyclable separation solvent.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.185-190
• /
• 2018

The dimer of bicyclo [2.2.1] hepta-2,5-diene (norbornadiene) can be used as a high-energy-density fuel. The purpose of this study is to investigate the effect of Co loading on the acid properties of HY zeolite catalyst and the catalytic activity in norbornadiene dimerization. When the cobalt was loaded on the HY zeolite catalyst, the amount of acid sites did not change, but the acid strength weakened. This can be attributed to the decrease in $Br{\ddot{o}}nsted$ acid site and the increase in Lewis acid site. The norbornadiene conversion and yield of norbornadiene dimer over the Co/HY catalyst showed higher than those over the HY zeolite catalyst. The higher activity of the Co/HY catalyst can be ascribed to the higher amount of Lewis acid sites over the Co/HY catalyst. Density and calorific values of the norbornadiene dimer prepared by using the Co/HY catalyst agreed well with the known values in the literature. It was confirmed that the norbornadiene dimer prepared in this study can be used as a high-energy-density fuel.

• Clean Technology
• /
• v.14 no.3
• /
• pp.176-183
• /
• 2008

The purpose of this study is to upgrade the catalysts for synthesizing mixed octenes using normal butene and the catalysts for synthesizing $C_9$-aldehyde through hydroformylation of mixed octenes with syngas. The in-line activation method with circulating activating solution was effective for activation of the $NiO/A1_{2}O_3$ catalyst. The reason for catalyst deactivation may be ascribed to physi-sorbed materials or oligomers which block pore entrance and then prevent active sites from participating a reaction. Continuous distillation apparatus was used for separating mixed octenes from dimerization products. When reflux ratio was above 3 : 1, mixed octene fraction of which purity was above 99.57% was obtained. In $C_9$-aldehyde synthesis through hydroformylation of mixed octenes, we investigated a performance of ligand which increased catalyst stability as well as activity of Co catalyst. The results indicated that TPPO, NMP, NDMA, and succinonitrile were suitable ligand for increasing initial activity and reducing loss of Co during catalyst recovery.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.1006-1014
• /
• 1996

A series of catalysts, $NiO-ZrO_2/WO_3$, for ethylene dimerization were prepared by coprecipitation from a solution of nickel chloride - zirconium oxychloride mixture followed by dry impregnation with an aqueous solution of ammonium metatungstate and calcination in air. On the basis of the results obtained from x-ray diffraction and DSC, the addition of NiO and $WO_3$ to $ZrO_2$ shifted the transition of $ZrO_2$ from amorphous to a tetragonal phase toward higher temperatures due to the interaction between NiO(or $WO_3$) and $ZrO_2$. $NiO-ZrO_2$ without $WO_3$ was inactive for the ethylene dimerization, but $NiO-ZrO_2/WO_3$ was found to be very active even at room temperature. The high catalytic activity of $NiO-ZrO_2/WO_3$ was closely correlated with the increase of acid strength by the inductive effect of $WO_3$.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.471-475
• /
• 2013

This study is about photosensitive microspheres prepared by coating alginate microspheres with gelatin-cinnamic acid conjugate. Firstly, alginate microspheres was prepared in water-in-oil (W/O) emulsion and then they were coated with gelatin- cinnamic acid conjugate. Herein, gelatin-cinnamic acid conjugate is obtained by the amidation between an amine group of gelatin and a carboxy group of cinnamic acid. Cinnamic acid is widely used as a photo-responsive material easy to dimerize and dedimeriz under UV irradiation at ${\lambda}$ = 254 nm and ${\lambda}$ = 365 nm, respectively. As shown in SEM-EDS, alginate was successfully coated with gelatin-ciannmic acid. By determining the absorbance of coated microspheres at 270nm, the amount of cinnamic acid per microspheres was 0.13/1. The SEM photos showed the size of coated microspheres is around $10{\mu}m$. And the degrees of dimerization and dedimerization were calculated to be 49% and 23% respectively. Then the release of FITC-dextran from the coated micrspheres was studied and release the degree was 42%. As a result, the coated microspheres have potential to be used as a photo-responsive drug carrier to delivery drugs.

• Journal of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.282-290
• /
• 1982

Several cation exchanged-layer silicate catalysts were prepared from acid clay mainly consisted of montmorillonite, and their catalytic activities for the ethylene polymerization were studied at room temperature. It was found that over$Ni^{2+}$ -Mont, dimerization of ethylene to n-butene proceeded selectively.$Ni^{2+}$ -Mont was activated by evacuation at elevated temperature, giving a maximum temperature, 150$^{\circ}$C . The variations in catalytic activities were closely correlated to the acidity of the catalysts.$Cr^{3+}$ -Mont exhibited a high activity for the polymerization, showing, a maximum at the evacuation temperature of 450$^{\circ}C$. The active site in $Cr^{3+}$-Mont was considered to be $Cr^{3+}$ ion.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.871-877
• /
• 1994

Most of the aromatic nitro compounds were reduced to amines in high yield by transfer of hydrogen from 4-vinyl cyclohexene to the substrate via palladium catalyst. The usefulness of the method is not affected by the presence of a variety of other functional groups such as -OH, $-OCH_3$, $-CH_3$, $-CO_2H$, and -Cl, except for halogen which is removed during hydrogenation. The reduction of ortho-substituted nitrobenzene such as o-nitrotoluene, o-nitrophenol, o-nitroanisole was slower than the para isomer. Typically, the nitro compound is refluxed in ethanol with a large exess of 4-vinylcyclohexene in the presence of Pd-C catalyst. Under the above conditions, p-nitrobenzaldehyde, p-nitrobenzyl alcohol, and p-nitrobenzyl acetate were reduced to p-toluidine.

• Clean Technology
• /
• v.14 no.2
• /
• pp.87-94
• /
• 2008

The catalytic properties of large pore zeolite (mordenite, beta, and Y) with 12-membered rings were comparatively evaluated in the synthesis of diethylamines from ethanol amination. The number of strong acid sites, which obviously promoted the formation of mono- and diethylamines, was decreased with the increase of Si/Al ratio of the zeolites that were used. H-beta and H-Y zeolites with multidimensional pore channels favorably formed diethylether by the dimerization of ethanol, due to their large cage volumes and low acid strength. On the other hand, H-mordenite which has one dimensional straight channel was shown to be suitable for the formation of mono- and diethylamine which are well known as the useful intermediates of fine chemicals.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.379-386
• /
• 1996

Photosensitive compound, 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A salt), was synthesized from dimethyl sulfate, terephthalaldehyde mono-(diethylacetal) and 4-picoline. SbQ-A salts were reacted with poly(vinyl alcohol)s, (PVA) in aqueous solution with phosphoric acid as catalyst to give photosensitive PVA-SbQ with different SbQ content and molecular weight. Relative photosensitivity of PVA-SbQ was determined by gray scale(GS) method. The rotative sensitivity of PVA-SbQ increased with increasing amount of bound SbQ in the case of high molecular weight(MW=77,000-79,000g/mol) as substrate and decreased with decreasing molecular weight of PVA with about constant(1.3mol%) amount of bound SbQ. The most sensitive polymer was obtained when SbQ group content in PVA-SbQ reached about 2.63mol% in the case of high molecular weight(77,000-79,000g/mol) PVA. This sample showed 90 times greater sensitivity than dichromated PVA as reference photosensitive system. PVA-SbQ photosensitive polymer synthesized was applied to the photolithographic screening process of phosphor on the panel of cathode ray tube(CRT). Phosphor slurry was made with PVA-SbQ, phosphor, a small amount of surfactant and other additives using water as medium. The slurry was coated onto panel, dried by heater, exposed to UV light and then developed by distilled water. When a small amount of cationic surfactant such as cetyltrimethylammonium chloride was used in the slurry formulation, the sharpness of phosphor pattern was equal to or better than that of dichromated PVA photosensitive polymer system used currently.