• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.177-178
• /
• 2017

본 논문에서는 벅-타입 능동 전력 디커플링 회로의 단순화된 제어 방법을 위한 가변 스텝을 적용한 최적 보상 이득 알고리즘을 제안한다. 고정 스텝을 사용한 기존의 최적 보상 이득 알고리즘보다 유동적인 보상 이득 변화를 통해 DC링크 전압 리플을 효과적으로 줄일 수 있다. 기존의 방법보다 최적 보상 이득을 추적하는 시간이 줄어들어 갑작스런 부하 변동이나 이상 상황에 빠른 대응이 가능하다. 벅-타입 능동 전력 디커플링 회로는 전류 불연속 모드로 동작하며, 전류 지령치는 DC링크 전류의 1차 리플 성분에 전류 이득을 유동적으로 보상하여 생성하기 때문에 모든 구간에서 효과적으로 DC링크의 전압 리플을 줄일 수 있고 빠른 대응이 가능하다. 제안하는 가변 스텝을 적용한 최적 보상 알고리즘의 효과는 MATLAB-Simulink 시뮬레이션을 통해 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1507-1516
• /
• 1999

본 논문에서는 전력증폭기 선형화를 위한 Cartesian feedback 방식의 궤환 경로에서 발생하는 DC offset과 이득 및 위상 불일치를 자동적으로 보상하는 개선된 방식을 제안한다. Cartesian feedback에 의한 비선형 전력증폭기 왜곡성분의 감쇠 정도는 시스템 루프의 이득, 대역폭, 시간지연에 의해 결정된다고 알려져 있다. 그러나 궤환 경로 각 소자에서 발생하는 DC offset과 이득 및 위상의 불일치로 인하여 송신기의 출력신호에 원하지 않는 반송파 성분과 이미지 신호가 발생하여 궤환보상의 효과가 반감되는 결과를 초래한다. 본 논문에서는 디지털 신호처리 시스템 구조에서 이진 검색 (binary search) 알고리즘을 이용하여 궤환 경로에서 발생하는 DC offset과 이득 및 위상 불일치를 자동적으로 보상하는 방식을 제안하고 컴퓨터 모의실험을 통하여 제안된 방식의 성능을 분석한다. 모의실험에서 고려된 방식에 비하여 동일한 정도의 DC offset과 이득 및 위상 불일치의 보상에 걸리는 시간을 평균적으로 40% 단축할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.25-29
• /
• 1984

The active compensation of operational amplifeir is that it compensates the phase shift and the attennation of gain of OP Amp, according as the frequency increases. The compensation circuit is applied to VCVS and interting integrator. For VCVS, the phase shift of proposed compensated circuit is not concern with the frequency and the gain chracteristic is better than the proposde circuit by Soliman, according as the rate of feedback resistors of compensated circuit changes. Voltage follower accomplishies compgnsation using the same circuit. Also, the compensation circuit to increase O-ffactor in inverting integrator is proposed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1104-1111
• /
• 2003

The paper presents an algorithm for the compensation of gain and phase imbalances to exist between I-phase and Q-phase signal at direct conversion receiver. We propose a gain and phase imbalances blind equalization compensation algorithm by using variable step-size adaptive loop at direct conversion receiver. The blind equalization schemes have trade-off between convergence speed and jitter effect for the compensation of gain and phase imbalance. We propose the variable step-size adaptive loop method, which varies the loop coefficients according to errors, for recovering these problem. By using variable step-size adaptive loops, we propose to speed up the convergence process and reduce the jitter effect and simulation results show that the algorithm compensates signal loss and speeds up convergence time.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.915-918
• /
• 2003

본 논문에서는 높은 슬루율을 가지고 전압편차 (offset)보상 기능을 가지면서도 전력소모가 적은 고계조 TFT-LCD 데이터 드라이버 구동용 단일이득 연산증폭기(unit gain op-amp)의 바이어스 회로 및 구동 방법을 제안하였다. 제안한 단일이득 연산증폭기는 일반적으로 사용되고 있는 전압편차 보상기능을 가진 단일이득 연산증폭기에 adaptive bias기능을 추가한 것으로써, 기존 구조에 비해 50%이상의 소비 전력 절감 효율을 보였다.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.238-247
• /
• 2005

In this Paper. we Presents subband design techniques of a compensating filter and adaptive feedback canceller for the digital hearing aid. The sensorineural hearing loss has a hearing threshold that shows a nonlinear characteristic in frequency domain. and its compensation suffers from an echo that produced by an undesired time varying feedback path. Therefore. the digital hearing aid requires the compensator that can adjust gains nonlinearly in frequency bands and eliminate the echo rapidly In the Proposed digital hearing aid. the compensating filter is designed by the adaptive system identification method in subband structure, and the adaptive feedback canceller is designed by the subband affine projection algorithm. The designed compensation filter can control the nonlinear gain in each subband respectively, therefore precise compensation is possible. And the feedback canceller using the subband adaptive filter achieves fast convergence rate. The Performances of the Proposed method are verified by computer simulations as comparing with the behaviors of the previous trials.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.12-16
• /
• 2003

This paper presents a compensation method for a temperature-dependent gain tilt in L-band erbium-doped fiber amplifier using a voltage-controlled attenuator. The gain tilts in the L-band of 1570-1605 nm due to a temperature change have negative slopes, whereas they have positive slopes for the increasing optical input powers in a saturation region. The proposed method utilizes these opposite gain variations to compensate for the gain tilt over a wide range of temperature. While applying forty channels with a channel spacing of 100 GHz in the L-band and changing the ambient temperature from 0 to $50^{\circ}C$, the compensation method maintained the gain deviation within 1 dB.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.42-49
• /
• 2004

This paper presents a new method of external load disturbance compensation using deadbeat load torque observer and gain compensation by parameter estimator. The response of the permanent magnet synchronous motor(PMSM) follows the nominal plant. The load torque compensation method is composed of a deadbeat observer. To reduce the noise effect, the post-filter implemented by moving average(MA) process is adopted. The parameter compensator with recursive least square method(RLSM) parameter estimator is suggested to make the new system work as same as the name plate system which in used to take gains. The proposed estimator is combined with a high performance load torque observer to resolve the problems. As a result, the proposed control system has a robust and precise system against the load torque and the parameter variation. A stability and usefulness are verified by computer simulation and experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.51-55
• /
• 2019

This paper proposes a speech enhancement method utilizing the feature compensation gain for robust speech recognition performances in noisy environments. In this paper we propose a speech enhancement method utilizing the feature compensation gain which is obtained from the PCGMM (Parallel Combined Gaussian Mixture Model)-based feature compensation method employing variational model composition. The experimental results show that the proposed method significantly outperforms the conventional front-end algorithms and our previous research over various background noise types and SNR (Signal to Noise Ratio) conditions in mismatched ASR (Automatic Speech Recognition) system condition. The computation complexity is significantly reduced by employing the noise model selection technique with maintaining the speech recognition performance at a similar level.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.74-79
• /
• 2002

Many control techniques have been proposed in order to improve the control performance in discrete-time domain control system. In control system using these techniques, the response-characteristic of system is dependent on the gains of the controller. Specially, There is a need to readjust the gain of controller when the response of system is changed by disturbance or load fluctuation. In this paper, I-PD controller and pre-compensator are designed by multilayer neural network. The gains of I-PD controller and pre-compensator are adjusted automatically by back propagation algorithm when the response characteristic of system is changed under a condition. Applying this control technique to the position control system using a DC servo motor as a driver, the control performance of controller is verified by the results of experiment.