• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.183-188
• /
• 2008

Satellite DMB(Digital Multimedia Broadcasting) uses the Cap Filler(GF) that provides a service to the wave shade area of the satellite signal that is a non-line of sight area. The GF is the repeater and the Satellite DMB Systems certainly must construct the GF Network toguarantee the movement reception of the terminal. As the coverage of the GF is formed the Cell or Sector, when the multiple GF is established to be contiguous, the problem of the interference will be able to occur. This paper describes the Satellite DMB system and the GF, and it investigate the design fundamentals plan of the GF Network that it will be able to reduce this problem. As a result, in case of the distance that GF and terminal unit is above 4.6Km, service is not provided because of quality degradation according to mutual interference.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.156-160
• /
• 2012

Recently WCDMA signal transmission technology by large output microwave antenna have showed reduction of human resources and operating expense. But the existing antenna brackets cost is very expensive also its structure and functions are complicated. Unit brackets, suspending some sensors, subjected to acceleration loads, often fail due to self-vibration. To prevent such failures, it is necessary to understand the fatigue failure mode and to evaluate the fatigue life using tests or analysis techniques. The objective of this study is to develop the component test specifications, which are applicable to predict fatigue life at initial product design step, for unit brackets using vibration fatigue technique. So its application is limited to installation and management. In this project, we studied about more convenient bracket for microwave antennas through improvement on the existing antenna bracket's shortcoming and could develop an improved universal antenna bracket system for simple installation and application.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.1-12
• /
• 2008

In this paper, we described about core technologies required for the seamless service implementation and the communication system structure conceiving required for call & response services in order that the real-time traffic information service is consecutively provided to the vehicle moving at high speed. The SMART highway service is the information communication environment build-up concept which the real-time C&R service is comprised of the vehicle moving with 160km/h above. It was possible in case of being the low speed car in the DSRC system structure. However, there is a limit in the high speed environment as the DSRC system like a convention. In this paper, we proposed the structure of fitting for the SMART highway environment using the hand-over technique compositing the base station and several repeaters of DSRC system.

• Electronics and Telecommunications Trends
• /
• v.8 no.3
• /
• pp.21-32
• /
• 1993

SMX/CMP는 통신망기술연구실에서 개발한 대용량 stand-alone 신호중계교환기 SMX-1을 이용하여 지능망 또는 이동통신망의 노드에 CCS No.7 접속이 가능하도록 설계된 CCS No.7 프로토콜 처리장치이다. 기존의 SMX/CMP는 2대의 대형 랙으로 구성되었으며, CCS No.7 프로토콜 처리 장치로서는 너무 크기 때문에 소형으로 되어야 한다는 요구가 있었다. 상호연결시스팀인 HSCU-8채널의 설계와 물리적인 재구성으로 SMX/CMP을 소형화 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.182-185
• /
• 2014

In this paper, the ADC performs research and development for high speed data transfers to minimize the optical delay. Have more $6{\mu}s$ delay in the data signal converting optical repeater transmission system existing there has been a limit on the high-speed data transmission, and signal conversion. The need to develop a new technique to reduce the delay in time within $2{\mu}s$ data signal converted by using this direct conversion system. It is desired the development of the core technologies necessary for the signal transduction component, such as mobile communications LTE, LTE advanced service transport network is established, the delay time $3{\mu}s$ technology for reducing the delay time in the signal converting a revolutionary step is applied in this paper we have developed an ADC.

• Information and Communications Magazine
• /
• v.28 no.8
• /
• pp.10-17
• /
• 2011

3GPP($3^{rd}$ Generation Partnership project)는 3세대 이동통신인 UMTS(Universal Mobile Telecommunication System)의 초기 표준화 이후 HSPA(High Speed Packet Access), MBMS(Multimedia Broadcast Multicast Service) 등의 기술 개발로 UMTS시스템을 지속적으로 발전시켜 왔다. 그리고, 최근 새로운 무선 접속 기술을 기반한 LTE(Long Term Evolution)시스템에 대한 표준화를 완료하고 ITU-T(International Telecommnunications Union-Radio)의 IMT-Advanced 요구사항을 만족하는 LTE-Advanced 시스템에 대한 연구를 진행하고 있다. 한편 LTE-Advanced 표준의 목표인 무선 전송속도를 한층 더 높이고, 단위비용(cost per bit)을 더욱 낮추고, 셀 커버리지 및 용량을 확대하기 한 저출력의 피코셀, 펨토셀, 무선중계기들을 이용하여 실내외의 소규모 영역을 서비스하도록 하는 heterogeneous network에 대한 국제 표준이 활발히 논의되고 있다. 그러나 여러 셀이 혼재하는 경우 셀들간의 신호 간섭이 발생하여 사용자의 통신 품질이 크게 저하될 우려가 있다. 본 고에서는 heterogeneous network 와 관련하여 국제 표준 LTE-Advanced에서 논의되고 있는 간섭 제어 기법에 대해 소개한다.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.411-417
• /
• 2023

Unmanned aerial vehicle (UAV)-assisted relay has the advantages of ease of deployment, good communication channels, and mobility over traditional terrestrial relay, which greatly improves wireless connectivity. In this paper, we design a UAV-enabled relay network that can utilize radio frequency bands to harvest energy from sources and utilize terahertz (THz) bands to transmit information between secondary transmitters and receivers. Next, we solve the optimal position of the UAV that maximizes the relay channel capacity, and propose an algorithm to design two trajectories of UAV (a straight and an elliptical trajectory) using the derived solution. Numerical results show that the straight trajectory is better in terms of harvested energy and channel capacity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.744-751
• /
• 2006

Even many kinds of Internet-based services have been generated due to the great development of the Internet. PSTN still exists in the center of the national infrastructure network and the transit exchanges will be maintained the core roles in PSTN for many years in the future. These transit exchanges often suffer from unexpected overload situation because they have to process Intelligent Network calls and mobile calls additionally as well as POTS (Plain Old Telephone Service). In this paper, we suggest an efficient overload control algorithm for the distributed transit switching system under the various types of call services. We also show that this algorithm can be implemented easily cooperating with the network management control functions. The simulation technique is used to show that the proposed algorithm effectively controls calls and maintains safely the call processor's load under the various kinds of overload situations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1341-1347
• /
• 2000

For the DRT satellite transponder system, BER and total SNR to be required in the earth terminal are evaluated under the condition of HPA nonlinearity in the FBJ(full-band jamming) or PBJ(partial-band jamming) of uplink and downlink. In case that the satellite Inter bandwidth( Ws) is same to the earth terminal bandwidth($W_r$),in conditions of uplink JSR 10[dB], downlink JSR 10[dB] and processing gain 30[dB], linear transponder system shows that uplink SNR needs to be 14.2[dB] to achieve the total SNR 10[dB] requirement in downlink SNR 14[dB]. However, Nonlinear transponder system with OBO(output backoff) 2[dB] requires 20.1 [dB] uplink SNR. From the above results, the nonlinearity of HPA in the satellite transponder causes the degradation of BER performance so that it is of interest to consider the power increase.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.1-7
• /
• 1999

The demands for the various type of directional coupler, which is for the sampling of the signal levels in mobile communication baseband or transceiver systems, are growing. The proposed dual directional coupler, which has three parallel coupled transmission lines, can provide the dual coupling and good isolation characteristics between the coupling ports. In this paper, the novel analysis method and the design equation of even and odd mode for the dual directional coupler, which is employing the asymmetrically coupled transmission lines, are proposed. Using the proposed method, the dual directional coupler for PCS system has been designed and fabricated. We obtained the desired coupling value and the high directivity of 40dB. Measured results show the validity of this design method.