• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.512-516
• /
• 2004

Context-aware computing has been attracting the attention as an approach to alleviating the inconvenience in human-computer interaction. This paper proposes a context-aware system architecture to be implemented on an SoC(System-on-a-Chip). The proposed architecture supports sensor abstraction, notification mechanism for context changes, modular development, easy service composition using if-then rules, and flexible context-aware service implementation. It consists of the communication unit, the processing unit, the blackboard, and the rule-based system unit, where the first three components reside in the microprocessor part of the SoC and the rule-based system unit is implemented in hardware. For the proposed architecture, an SoC system has been designed and tested in an SoC development platform called SystemC and the feasibility of the behavoir modules for the microprocessor part has been evaluated by implementing software modules on the conventional computer platform. This SoC-based context-aware system architecture has been developed to apply to mobile intelligent robots which would assist old people at home in a context-aware manner.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.238-246
• /
• 2016

The study aims to examine Japan's National REDD+ Strategies prepared for Post-2020 and the status of its implementation by organizations in Japan, and then to suggest the potential REDD+ countermeasures against Joint Credit Mechanism (JCM) for Republic of Korea and their implications. As for the technical limitations of the guidelines of REDD+ under the JCM, it is pointed out that forests located at the place with less potential safeguard intervention tend to be selected as the target area for a project and that, as reference emission trend changes depending on the basic year of the baseline, differences could occur among the amounts of greenhouse gas emission. In addition, it is pointed out that the result of the calculation of the displacement of emissions, or leakeage, in REDD+, can have an uncertainty, since the calculation is done by just multiplying leakage area by certain coefficients, without considering the size of the leakage area. Furthermore, the lack of implementation guideline or methodologies for a project level is also pointed out as a limitation, considering that there are only some national and sub-national monitoring guidelines at present. Finally, internationally accepted guidelines for safeguard and its sub-items needed to be prepared, as current safeguard policy only includes lists without detailed items. Such things mentioned above are all related to, and can lead to the problem of double counting of items in Nested Approach etc., as well as of the distribution of credits. Therefore, Republic of Korea should take these into consideration when implementing its REDD+ projects.

• The Journal of Society for e-Business Studies
• /
• v.15 no.3
• /
• pp.163-181
• /
• 2010

As a part of efforts to reduce the global emissions of greenhouse gases, the Kyoto Protocol was signed by major developed countries ("Annex I" countries). According to the Kyoto protocol, the Emission Trading Scheme that derives a trading market of the $CO_2$ emission rights is appeared. It causes that business institutions give lots of efforts to reduce $CO_2$ by using new environmentally sound technologies or increasing efficiency in production. On the while there have been several studies trying to develop a methodology to measure the effect of $CO_2$ reduction and its monetary value. In this research we suggest ECRE (Evaluation of $CO_2$ Reduction in E-transformation) model which can measure the $CO_2$ reduction effect through the introduction of G2B system. ECRC model was developed based on the IPCC methodology. ECRC model measures the two major effects of the $CO_2$ reduction which are '$CO_2$ reduction effect from transportation' and '$CO_2$ reduction effect from the decrease of paper use'. In this paper, we calculate the economic effect of $CO_2$ reduction with the case of the G2B system in Korea. This research suggests a basic methodology to measure the $CO_2$ reduction performance for the e-transformed institution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.228-236
• /
• 2009

In this study, we investigated morphological characteristics of $SF_6$ clathrate hydrate crystals to understand its formation and growth mechanism. $SF_6$ clathrate hydrate crystals were formed in high-pressure reaction cell charged with pure water and $SF_6$ gas at constant pressure and temperature. Two-phase ($SF_6$ gas/aqueous solution) and three-phase ($SF_6$ gas/aqueous solution/$SF_6$ liquid) conditions were investigated, In both conditions, dendritic shape hydrate crystals were grown as like fibriform crystals along upward growth direction at the gas/aqueous solution interface. In the case of the reaction process of three-phase condition, when the $SF_6$ gas bubbles which were generated in $SF_6$ liquid phase due to the reduction of reaction cell pressure stuck to the gas/aqueous interfaces, the hydrate phase were appeared at the surface of the bubbles. This paper presents the detail growth characteristics of $SF_6$ hydrate crystals including crystal nucleation, migration, growth and interference.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.57-68
• /
• 2004

When an embankment is constructed on soft clay ground, the lateral displacement generally called as lateral flow is generated in the foundation ground. It strongly affects stabilities of structures, such as foundation piles and underground pipes, in and on the foundation ground. The lateral earth pressure induced by the lateral flow is influenced by the magnitude and construction speed of embankment, the geometric conditions and geotechnical characteristics of the embankment, and the foundation ground, and so on. Accurate methods for estimating the lateral earth pressure have not ever been established because the lateral flow of a foundation ground shows very complicated behavior, which is caused by the interaction of shear deformation and volumetric deformation. In this paper, a series of model tests were carried out in order to clarify effects of construction speed of an embankment on the lateral earth pressure in a foundation ground were design. It was found that the magnitude and the distribution of the lateral earth pressure and its change with time are dependent on the construction speed of the embankment. It was found that a mechanism for the lateral earth pressure was generated by excess pore water pressure due to negative dilatancy induced by shear deformation under the different conditions of construction speeds of embankments.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.115-115
• /
• 2017

티타늄에 있어서 주요 침입형 원소인 산소는 결함을 일으키는 원인으로 산소함량을 줄이는 연구가 활발히 진행되고 있다. 최근 가장 많이 이용되는 탈산 방법은 칼슘 및 칼슘염화물의 높은 산소 친화력을 이용하는 것이다. 칼슘염화물 플럭스를 사용하여 칼슘을 용해하고, 티타늄과 반응한 탈산생성물인 칼슘산화물을 플럭스 내에 용해시키는 방법이다. 이러한 방법으로 티타늄 와이어 및 시트 내 산소를 저감한 연구가 보고되었다. 티타늄 탈산의 제일 큰 구동력은 티타늄 내 산소원자의 확산이다. 티타늄의 탈산온도가 1,155K 이상으로 증가하면 hcp에서 bcc 구조로 변태되는데 이러한 구조에서 산소의 확산은 더 활발해진다. 실제로 티타늄의 변태온도 이전에서는 확산속도가 낮아서 큰 변화가 없지만, 1,273K 고온의 bcc 구조에서는 확산속도가 빨라서 그 이전에 비해 100배 이상 빠르게 원자 이동이 일어나는 것으로 알려져 있다. 하지만 이러한 탈산 방법은 티타늄 원재료가 벌크 형태에서 주로 연구되었으며 티타늄 분말에 대한 탈산 연구는 보고된 바가 많지 않다. 이는 높은 탈산온도에서 칼슘의 용해로 인한 분말의 건전한 회수가 어렵기 때문이다. 이러한 문제를 해결하기 위해 본 연구진은 칼슘 증기를 이용한 비접촉식 탈산 용기를 제작하여 티타늄 분말을 변태온도 이상에서 탈산하여 1,000ppm 이하 저산소 티타늄 분말을 회수하였다. 칼슘을 이용한 티타늄 내 산소의 제거 메커니즘을 깁스자유에너지와 각각의 분압에 의해 설명하고 있다. 가장 일반적인 설명은 티타늄 내 산소가 탈산온도에 따라 확산하게 되며 이러한 산소는 티타늄의 표면에서 티타늄 산화층을 형성한다. 이때 탈산제인 칼슘의 높은 산소 친화력으로 티타늄 산화층은 분해되어 칼슘산화물을 형성한다. 이러한 과정으로 티타늄 내 산소가 제거되는 것으로 알려져 있다. 하지만 많은 탈산 연구에도 불구하고 대부분의 연구 보고에서는 탈산 전후의 산소 농도 변화만 측정하였으며, 실제적으로 티타늄 탈산 전후의 표면산화층의 변화, 티타늄 내부의 산소농도 변화 및 격자 변형에 대한 연구는 보고된 바 없다. 따라서 본 연구는 1,000 ppm 이하 저산소 티타늄 분말 제조에 있어서 탈산 전후 표면 산화층 및 내부 산소 농도 등을 분석하여 탈산 거동에 대해 관찰하였다. 본 연구에서 비접촉식 탈산용기를 이용하여 칼슘 증기에 의한 탈산에 의하여 1,000 ppm 이하 저산소 티타늄 분말 제조하였고, 탈산된 분말을 티타늄 원재료와 비교하여 표면 산화층, 격자 변형, 내부 산소 농도 등을 분석하여 탈산에 따른 산소 거동을 살펴보았다. 탈산된 티타늄 분말의 표면 산화층은 원재료 대비 73% 제거되어 약 3nm로 줄었음을 확인하였고, 또한 표면 산화층 감소뿐만 아니라 티타늄 분말 내부에서도 원재료보다 산소 농도가 감소하였음을 확인하였다.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.131-140
• /
• 2004

T7 bacteriophage gp4 is the replicative DNA helicase that unwinds double-stranded DNA by utilizing dTTP hydrolysis energy. The quaternary structure of the active form of T7 helicase is a hexameric ring with a central channel. Single-stranded DNA passes through the central channel of the hexameric ring as the helicase translocates $5'\rightarrow3'$ along the single-stranded DNA. The DNA unwinding was measured by rapid kinetic methods and showed a lag before the single-stranded DNA started to accumulate exponentially. This behavior was analyzed by a kinetic stepping model for the unwinding process. The observed lag phase increased as predicted by the model with increasing double-stranded DNA length. Trap DNA added in the reaction had no effect on the amplitudes of double-stranded DNA unwound, indicating that the $\tau7$ helicase is a highly processive helicase. Global fitting of the kinetic data to the stepping model provided a kinetic step size of 10-11 bp/step with a rate of $3.7 s^{-1}$ per step. Both the mechanism of DNA unwinding and dTTP hydrolysis and the coupling between the two are unaffected by temperature from $4∼37^{\circ}C$. Thus, the kinetic stepping for dsDNA unwinding is an inherent property of tile replicative DNA helicase.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.91-102
• /
• 2003

There are two goals in this paper. The one is development of existing CA(Cellular Automata) model to explain more realistic deceleration process to stop. The other is the application of the updated CA model to forecasting simulation to predict short term link travel time that takes a key rule in finding the shortest path of route guidance system of ITS. Car following theory of CA models don't makes not response to leading vehicle's velocity but gap or distance between leading vehicles and following vehicles. So a following vehicle running at free flow speed must meet steeply sudden deceleration to avoid back collision within unrealistic braking distance. To tackle above unrealistic deceleration rule, “Slow-to-stop” rule is integrated into NaSch model. For application to interrupted traffic flow, this paper applies “Slow-to-stop” rule to both normal traffic light and random traffic light. And vehicle packet method is used to simulate a large-scale network on the desktop. Generally, time series data analysis methods such as neural network, ARIMA, and Kalman filtering are used for short term link travel time prediction that is crucial to find an optimal dynamic shortest path. But those methods have time-lag problems and are hard to capture traffic flow mechanism such as spill over and spill back etc. To address above problems. the CA model built in this study is used for forecasting simulation to predict short term link travel time in Kangnam district network And it's turned out that short term prediction simulation method generates novel results, taking a crack of time lag problems and considering interrupted traffic flow mechanism.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.71-83
• /
• 2014

This study carried out an experiment in order to compare thermal characteristics after collecting dust generated in the process of disposing of waste tire, plywood flour in the process of manufacturing plywood, salicylic acid dust in the process of manufacturing functional soap, and dust in the process of manufacturing wheat powder, which has potential fire and explosion hazard. According to the results of experiment, the analysis showed that all samples subject to the experiment were in the condition where heat flux decreased and temperature decreased as the quantity of added talc was increased. This shows that decomposition rate decreased, and hazard decreased. However, in all of samples subject to the experiment, as heating rate increased, endothermic onset temperature moved to the low-temperature part, and the amount of absorbed heat was largely increased. This showed that the decomposition hazard of sample increased as heating rate increased, according to the analysis. Besides, TGA experiment results showed that thermal stability was secured because total weight loss decreased as the amount of talc was increased for all samples subject to the experiment regarding the ratio of weight loss. It is expected that the continuous research and supplementation of dust explosion mechanism in the future will contribute to the establishment of measures for the effective dust explosion prevention.