• Title/Summary/Keyword: 이관도구

Search Result 32, Processing Time 0.027 seconds

Development of a CAVE type Virtual Reality System for 3-D Spatial Data Visualization (3차원 공간 자료 시각화를 위한 CAVE 형 가상현실 시스템 구축)

  • Lee, Kwan-Woo;Lee, Doo-Sung
    • Geophysics and Geophysical Exploration
    • /
    • v.7 no.2
    • /
    • pp.117-120
    • /
    • 2004
  • Immersive virtual reality provides an effective way of visualizing and analyzing various spatial data, such as wireline logs, three-dimensional seismic, and interpreted geologic boundaries, and etc. Although it is a valuable tool for oil and gas exploration, its usage has been limited to a specific area because of its high development costs. This paper describes the development of an immersive virtual reality system, known as CAVE (Cave Automatic Virtual Environment) that maximizes immersiveness with reasonable prices by using general purpose PC and projectors.

An Economic Measures of the Renewable Energy considering Environmental Costs (환경비용을 고려한 재생에너지의 경제성 분석)

  • Lee, Gwan-Ho
    • Journal of the Korean Solar Energy Society
    • /
    • v.24 no.3
    • /
    • pp.93-100
    • /
    • 2004
  • This study aims to presents the applicability of economic measures for renewable energy The basic principle and method of economic analyses were investigated and total life cycle cost considering environmental costs according to $CO_2$ generation. In case study, adaptation of new small wind power system to buildings were proved to produce a profit if it is considered the environmental cost and increment of energy prices. And so the economic measures can be used not only for the investment decisions for economic analysis but also for the comparative analysis of environmental cost and economic profits.

A Study on the Development of a Classification System for the Records in Closed Private Universities: Focused on "Seonam University" (폐교 사립대학 기록물의 분류체계 개발에 관한 연구: 서남대학교를 중심으로)

  • Lee, Jae-Young;Chung, Yeon-Kyoung
    • Journal of Korean Society of Archives and Records Management
    • /
    • v.20 no.3
    • /
    • pp.39-54
    • /
    • 2020
  • Records at closed private universities are simply kept in stacks without the use of records classification systems. However, the systematic management of such records is needed as these are important records that have legal and evidential value during the litigation process. Therefore, this study intends to develop a classification system for recordkeeping at closed private universities aiming to eliminate unnecessary follow-up procedures that may occur because of the absence of a records classification system, and to develop practical tools for managing records at closed universities. To this end, Seonam University, among the 13 transfer records kept by the Korea Advancing Schools Foundation, was selected as the example for this study. The peculiarities of the closing processes and the catalogs of the transfer records were reviewed, and a business function analysis was conducted. Based on the Guidelines for Prescribing Retention Period of University Records by the National Archives and the Ministry of Education, a records classification system for the closed private universities was proposed for the Records Disposition Schedule to handle the uniqueness of closed universities.

A Study on the Issue and Resolving the Institutional Evaluation System : Targets of the 2017 Education Department Indicator (기관평가 제도의 문제점과 해결을 위한 고찰 2017년도 교육(지원)청 지표를 대상으로)

  • Kwon, Do-gyun
    • The Korean Journal of Archival Studies
    • /
    • no.49
    • /
    • pp.51-75
    • /
    • 2016
  • A records management agency assessment must reflect the possibility of actual situations including conditions and implementation. Institutional evaluation systems and indicators tools to improve records management. However, the reality is difficult if they are not conducted through the resources and efforts of the organization. The 2017 evaluation system of the National Archives of Korea and the index, which was published in March 2016, are expected to be highly difficult to perform as the frontline field tasks of the institution for a year. It is composed of indices with questionable effectiveness that are difficult to implement on the field. Some of these include the following: three training sessions for more than 10% of all employees, submission of document archive pictures of all schools, submission of the index items of all documents, increasing the utilization level of the standard record management system for the electronic documents that have not been transferred for several years, the transfer of non-electronic documents of all institutions, reclassification of non-disclosed records, etc. It recognizes the fundamental problems of the records management system and the 2017 evaluation indicators that the National Archives has mentioned about operations. As such, now is the time to reflect the years of experience in the field to amass knowledge that will help improve records management.

Case Study of Intelligence Record Management System Focus on Improving the Use of Current Record: The Case of Korea Midland Power Company (KOMIPO) (현용기록의 활용성 증진을 위한 지능형 기록관리시스템 구축: 한국중부발전 사례중심으로)

  • Joo, Hyun-woo
    • Journal of Korean Society of Archives and Records Management
    • /
    • v.19 no.4
    • /
    • pp.221-230
    • /
    • 2019
  • This paper aims to introduce the case of operating electronic document system and record management system as one system called i-Works at Korea Midland Power Company. i-Works combines intelligent services, such as artificial intelligence and a chatbot, as a supplementary tool for record management. As such, the preparation process and progress direction for the development of the record management system is introduced, an in-depth review of real-time transfer and utilization of the functional classification system to enhance the utilization of the current records is presented, and new technologies, such as artificial intelligence for an efficient management of the increasing number of electronic records, are established.

Systematic Determination of Empirical Parameters Used in Helicopter Conceptual Design (헬리콥터 개념설계에 사용하는 경험적파라메터의 체계적인 결정기법)

  • Kim, Won-Jin;Chae, Sang-Hyun;Oh, Se-Jong;Kim, Seung-Bum;Ahn, Iee-Ki;Yee, Kwan-Jung
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.40 no.8
    • /
    • pp.703-710
    • /
    • 2012
  • At the stage of conceptual design of a helicopter, it is a general way using low fidelity analysis methods because of a large number of design calculations and trade-off studies. Determination of empirical parameters used in analysis codes for more practical design, depends on an user's design experiences, which effects on the accuracy and the fidelity of conceptual design results. Thus, more precise and logical method should be required to determine the empirical parameters used in the conceptual design of a helicopter. The present method is to be used not only in verifying the empirical parameters generated by design requirements, but also regenerate them if they contain any errors. Empirical parameters produced by present method were used to design a helicopter with a payload objective and performance constraints of an operating helicopter. As a result, weights and geometries of designed helicopter matched the target value within 5% significance level, proving that the suggested parameter generating method can be useful in the conceptual design of a helicopter.

Managing and Modeling Variability of UML Based FORM Architectures Through Feature-Architecture Mapping (휘처-아키텍처 대응을 통한 UML 기반 FORM 아키텍처의 가변성 모델링 및 관리)

  • Lee, Kwan-Woo
    • The KIPS Transactions:PartD
    • /
    • v.19D no.1
    • /
    • pp.81-94
    • /
    • 2012
  • FORM(Feature-Oriented Reuse Method) is one of representative product line engineering methods. The essence of FORM is the FORM architecture models, which can be reused in the development of multiple products of a software product line. The FORM architecture models, however, have the following problems when applied in practice. First, they are not standardized models like UML(Unified Modeling Language) and therefore they can be constructed only through a specific modeling tool. Second, they do not represent architectural variability explicitly. Instead their variability is only managed through a mapping from a feature model. To address these two problems, we developed at first a method for representing the FORM architecture models using UML, which enables the FORM architecture models to be constructed through various available UML modeling tools. Also, we developed an effective method for representing as well as managing the variability of the FORM architecture models through a mapping from a feature model.

Design Technology of Product Line Architecture for Software Globalization (소프트웨어 글로벌화를 위한 제품 라인 아키텍처 설계 기술)

  • Lee, Kwanwoo
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.13 no.2
    • /
    • pp.83-92
    • /
    • 2013
  • Software globalization is the supporting process of adapting computer software to different country and culture. Most efforts for software globalization have been focused on the development of software implementation techniques or tools. However, global software sold worldwide has different requirements implied by different contexts, and the difference of requirements may derive different architectural design. In this paper, we define such architectural design knowledge as knowledge models and propose a method for developing and using the knowledge models for software globalization. Also we use set-top box middleware systems for digital data broadcast to validate the applicability of the proposed models and methods.

An Analysis of Axisymmetric Cylindrical Shell by the Leading Matrix Method (인도행렬에 의한 축대칭 원통형 쉘의 해석)

  • 이관희;박준용;김우중
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.17 no.2
    • /
    • pp.193-201
    • /
    • 2004
  • The aim of this study is focused on getting an almost exact solution which is the simplicity and exactness of an axisymmetrically loaded cylindrical shell. This method replaces the finite element method which is a very powerful tool for analysis of any kind of structure which has an arbitrary shape, but is still a numerical analysis. Instead, this study uses the method of distribution of end actions which is a kind of iteration technique to implement the leading matrix method. The distribution and carry-over factors of a cylinder are calculated by the theory of a differential equation of a beam on an elastic foundation. The results are satisfactory when this method is applied to a cylinder that is subjected to a concentrated load and hydrostatic pressure when compared with the BEF analogy separately.

A Survey on Usage of Korean Standard Records Management System (표준기록관리시스템의 활용현황 연구)

  • Lee, So-Yeon
    • The Korean Journal of Archival Studies
    • /
    • no.43
    • /
    • pp.71-102
    • /
    • 2015
  • The present study aims at investigating the current usage patterns of Korean Standard Records Management System. The Korean Standard Records Management System has been designed and distributed by the National Archives Korea in order to support records management of public agencies. An email survey has been sent to 4 types of public agencies: central government agencies, provincial governments, provincial education offices as well as city and county offices. While all agencies are included in the survey for the first three types, only two provincial districts are selected for city and county offices, Out of 101 email questionnaires sent, 65 are returned(63.73%). The results show the usage patterns of 240 functionalities aligned to 9 main functions: accession from records creators, preservation, appraisal, accession to the national archives, reference management, access and tracking, retrieval and use, system management as well as freedom of information management by public institutions. Since its launch in 2007, the system has been distributed to 707 public agencies as of late 2014. The problem is that there has been no attempt to evaluate the functionalities and usabilities of the system. Only grievances from those agencies implemented the system have never been ceased. The present study is expected to offer the levelled ground for productive discussion between the national archives and the agencies.