• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.8
• /
• pp.367-373
• /
• 2001

This paper presents racetrack High Temperature Superconducting (HTS) magnet with iron plates to achieve the maximum current-carrying capacity and the simple shape that can easily be wound and jointed. On the basis of the magnetic field analysis using Biot-Savart's law and 3 Dimensional Finite Element Analysis (3D FEA), this study is focused on the function of iron plates, which is to obtain smaller B${\perp}$, and stress and strain condition of Ag-sheathed Bi-2223 37-filament HTS tapes are considered. Moreover, the measured performance of the magnet with iron plates improved by 50% on the basis of initial magnet.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.816-818
• /
• 1998

In this paper Polyimide(PI) thin film are fabricated by vapor deposition polymerization(VDP) of dry process which are easy to control the film's thickness and hard to pollute due to volatile solvent. The FT-IR spectrum show that PAA thin films fabricated by VDP are changed to PI thin film by thermal curing. From AFM(Atomic Force Microscopy) experimental as the higher curing temperature. the thin film thickness decreases and roughness decresse.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1503-1505
• /
• 2001

방사선이 폴리에틸렌 박막의 결정구조에 미치는 영향은 결정구조의 전 영역에서 결정 격자의 결함으로 나타났으며, 이는 탄탄한 연결고리를 형성하고 있는 분자쇄의 단절로 인하여 결정 내부 및 표면에서 화학작용에 의한 기포가 발생한 것으로 판단된다. 또한, 방사선량의 증가에 따라서 그 결함은 비례적으로 증가하였으며, 주파수에 따른 유전특성 고찰결과는 10 MHz 이상의 범위에서 유전율이 급격히 증가하였다.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1728-1731
• /
• 1996

To develop more sensitive humidity sensor on high temperature region, in this paper, we prepared polyimide humidity sensor by electrophoretic method. Sensing properties of be sensor in high temprature region were studied and compared with that prepared by solution casting method. From the result, the thiner film thickness, the more sensitive. however, It is difficult to make he thickness optimal because of short between electrodes, and the thickness of upper electrode is one of most important parameters affecting pefomance of the sensor.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.265-268
• /
• 2001

In content-based video data retrieval, the representative-frame is usually used. To do that, the skill of detection for scene change is needed. Generally the color histogram comparison is used, but sensitive to light variation and tends to miss the scene change of similar color histogram. This paper shows how to use both color histogram comparison and entropy to prevent the false-positive of scene change occurred by light variation. At the experiments, il is more powerful to light variation to use both color histogram comparison entropy than to use only color histogram comparison.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1379-1381
• /
• 1994

In order to investigate the effects of crystal structure in electrical breakdown of polyethylene film. Low molecular materials in polyethylene are removed by the method as follow. Polyethylene was dissolved in xylene and filtered through a glass fiber filter. And then, a polyethylene thin films of thickness $0.5 - 0.9{\mu}m$ are prepared with heat treatment from solution casting. To evaluate the performance of PE film, Electrical breakdown of PE film are measured on M( Al) - I (PE)-M(Al) system.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1233-1235
• /
• 1994

In this work, polyimide thin films fabricated by the electrophoretic deposition are investigated as a humidity sensing material. Capacitance and impedance are measured with increasing relative humidity to find the nature of the film. From the results, the polyimide humidity sensor is not classified impedance change type but capacitance change type and appear more sensitive in the region of higher humidity than that of lower humidity.

• 전기의세계
• /
• v.45 no.7
• /
• pp.12-17
• /
• 1996

핵융합 반응을 일으키기 위한 조건으로써는 핵융합 연료를 초 고온 (1억도 이상)의 플라즈마 상태로 그 밀도와 밀폐(반응)시간의 곱이 $10^{20}$sec/m$^{3}$ 이상에 도달하도록 핵융합 반응 공간내에 밀폐시켜야 한다[1]. 현재까지의 밀폐방식으로는 강력한 전자석의 전자력을 이용하는 자계 밀폐방식 (Magnetic Confinement)과 레이져등을 이용하는 관성 밀폐 방식(Inertial Confinement)이 있다. 강력한 자장 발생이 용이한 특징을 지닌 초전도자석이 요구되는 자계 밀폐방식에도 여러가지 방식이 있으나, 크게 분류해 보면 원환체 (Torus)상의 자장을 발생시키는 토러스 밀폐방식과 직선상의 자장을 발생시키는 개방형 밀폐방식으로 대별되며 그 중에서도 핵융합 반응을 일으키기 위한 조건에 가장 근접한 플라즈마를 실현시키고 있는 토러스 밀폐방식의 일종인 토카막(Tokamak) 핵융합장치용 초전도자석에 대해 고찰한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.67-70
• /
• 1994

On this study, we fabricated humudity sensor with polyimide thin film from the nonaqueous emulsion by the electrophoretic deposition as a function of film thickness. then evaluated performance of the sensor with increasing relative humidity if constant temperature constant humidity chamber, which is electronically controlled. we designed upper electrode of the sensor to brush type to make moisture particles permeate into the polymer bulk. sensing properties of the sensor on % RH shows proportion on the low %RH. Fer the 30V-30S- 200$^{\circ}C$ sample, percentage changing of capacitance on from 30 %RH to 90 %RH is 45.8 %, and increasing rate per 1 % RH of capacitance is 11.25 pF

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.755-758
• /
• 2001

본 논문에서는 서로 다른 크기의 클러스터에 대해서 효과적으로 데이터를 분류할 수 있는 내부클러스터를 이용한 개선된 FCM 알고리즘을 제안하였다. 내부클러스터는 평균내부거리 안쪽에 속하는 데이터 집합으로 클러스터의 크기와 밀도에 비례한다. 그러므로 이를 이용한 개선된 FCM 알고리즘은 기존의 FCM 알고리즘이 클러스터 크기가 다를 경우 퍼지분할과 중심탐색을 제대로 하지 못하는 문제점을 개선한 수 있다. 실험을 통하여 개선된 FCM 알고리즘이 분류 엔트로피에 의해 기존의 FCM 알고리즘 보다 더 좋은 결과를 나타냄을 알 수 있었다.