• 대한치과보철학회:학술대회논문집
• /
• 1995.12a
• /
• pp.64-65
• /
• 1995

• 대한치과보철학회:학술대회논문집
• /
• 1998.11a
• /
• pp.33-33
• /
• 1998

• 대한치과보철학회:학술대회논문집
• /
• 2002.11a
• /
• pp.124-125
• /
• 2002

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.197-207
• /
• 2011

The study aimed at examining how different reline resins affect flexural strength and flexural modulus of denture base. A total of 80 specimens ($64{\times}10{\times}3.3$ mm, according to ISO 1567:1999) of heat-polymerized resin, 40 specimens for (Lucitone199(Dentsply Int., NewYork, USA), SR Ivocap(Ivoclar AG, Schaan, Liechtenstein)) respectively, were polymerized according to the manufacturer's instructions and divided into eight groups(n = 10). Control group specimens remained intact. Specimens in the other groups were abraded on both sides to 2 mm thickness, and were relined in 1.3 mm thickness with 3 types of resins (Lucitone199(Dentsply), SR Ivocap(Ivoclar), and Rebase II(Tokuyama Co., Ltd, Tokyo, Japan)). All specimens were preserved in distilled water at $37^{\circ}C$ for 50 hours, and then were subjected to flexural strength testing in a universal testing machine using 3-point loading. A crosshead speed of 5 mm/min was used, and the distance between the supports was 50 mm. Data analyses included one-way analysis of variance(ANOVA) and the Tukey Honestly Significant Difference test (p=.05). Both heat-polymerized resin groups and auto-polymerized resin groups showed statistically low flexural strength and flexural modulus than control groups. Specimens relined with Lucitone 199 showed significantly higher flexural strength and flexural modulus than those relined with SR-Ivocap. Specimens relined with auto-polymerized resin showed significantly lower flexural strength and flexural modulus than those relined with heat-polymerized resin. Relining with heat-polymerized resins showed superior mechanical properties to relining with an auto-polymerized resin. Relining with the same heat-polymerized resin as the denture base does not affect mechanical properties of a denture. Lucitone199 using a compression-mould technique resulted in the highest flexural strength.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.231-238
• /
• 2022

Purpose. This study aimed to investigate the effect of different veneering methods on the tensile bond strength between polyetherketoneketone (PEKK) and denture base resins. Materials and methods. A total of 80 PEKK T-shaped specimens were fabricated and the primer (Visio.link) was applied after airborne-particle abrasion with 110 ㎛ alumina oxide powder. According to the veneering method, the specimens were divided into four groups (n = 20) to be veneered with the gingival colored packable photopolymerized composite resin (SR Adoro); flowable photopolymerized composite resin, (Crea.lign); heat-polymerized resin (Vertex); and self-polymerized resin (ProBase Cold). Each group was divided into two subgroups (n = 10) according to the artificial thermal aging. After the tensile bond strength measurement via universal testing machine, the fracture sections of all specimens were observed. Two-way ANOVA and Tukey's HSD post hoc test were used for the statistical analysis (α = .05). Results. The results of the two-way ANOVA showed statistically significant differences in the tensile bond strength according to the veneering method and artificial thermal aging of denture base resins (P<.001). The highest tensile bond strength showed in the packable photopolymerized resin group before and after the artificial thermal aging. The lowest tensile bond strength showed in the heat-polymerized resin group. The mixed and adhesive fracture showed in all groups. Conclusion. The veneering method and artificial thermal aging can influence in the tensile bond strength between the resin and PEKK. The artificial thermal aging can reduce the tensile bond strength.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.6
• /
• pp.459-466
• /
• 2023

Objectives: The purpose of this study was to evaluate the physical properties and antibacterial activity of denture base resin with added silver sulfadiazine. Methods: Specimens were made from self-curing denture base resin and silver sulfadiazine as an inorganic antibacterial agent. For physical evaluation of the specimens, surface roughness, surface hardness, and contact angle were measured. Bacterial growth was assessed by optical densityat 600 nm (OD600) and colony forming units (CFU) measurements to confirm antibacterial activity. Results: There was no significant difference in surface roughness, surface hardness, and contact angle in the experimental group containing silver sulfadiazine compared to the control group. In contrast, the experimental group showed a significant decrease in antibacterial activity compared to the control group in terms of OD value. Analysis of CFU confirmed a significant decrease in colonies in the experimental group compared to the control group. Conclusions: Denture base resin containing silver sulfadiazine, an inorganic antibacterial agent, exhibited enhanced antibacterial activity without physical changes. In conclusion, the use of denture base resin containing inorganic antibacterial agents may be expected in the future.

• Journal of dental hygiene science
• /
• v.16 no.6
• /
• pp.409-414
• /
• 2016

The purpose of this study was to evaluate the antibacterial effect of tea tree oil in denture cleaners. A self-curing denture resin was used to make the experimental specimen ($12mm{\times}2mm$). A saline solution was used as the control. To observe surface changes after cleaning, the microhardness and color of the experimental specimen's surface were analyzed. For the antibacterial activity test, Candida albicans was used. The microhardness and color of the surface remained unchanged after cleaning. The result of the antibacterial activity test revealed that the tea tree oil-containing solutions had a more enhanced antibacterial effect than did the saline solution. Therefore, these results suggest that the tea tree oil-containing solution is a promising denture cleaners.

• Journal of Korean society of Dental Hygiene
• /
• v.21 no.6
• /
• pp.703-710
• /
• 2021

Objectives: The purpose of this study was to confirm the influence of commercially available carbonated water on denture resin by confirming the changes in the denture surface and adhesion of bacteria. Methods: Carbonated water available in the domestic market was used on specimens made of prosthetic resins. The top four products with respect to sales performance was deposited for 30 min, 24 h, and 48 h over the study groups and over one control group. The surface roughness was measured. Candida albicans was inoculated and cultured over these dentures at 37℃ on the study groups of 1 h, 24 h, and 48 h, and the number of colonies formed was measured. Results: As a result of comparing the surface roughness between groups by immersion time, the difference between groups was confirmed at 48 hours. The Trevi group showed a larger Rz than the Samdasoo group. As a result of comparing the surface roughness by time in each group, statistical significance was shown in the Ra value of the Seagram and the Rz value of the Chojung sparkling water (p<0.05). The Ra value of the Seagram was higher for 48 h than for 30 min, and the Rz value of the Chojung sparkling water was higher at 48 h than at 30 min (p<0.05). Candida albicans concentration increased over the course of immersion. Conclusions: It was confirmed that longer the specimen of the denture resin was immersed in carbonated water, more the surface roughness was affected and higher the number of attached bacteria.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.515-522
• /
• 1993

The purpose of this study was to evaluate the bond strength of rebase resin to denture base resin. The denture base resins in this study were Premium Super-20(Lang Dental Mfg. Co. Inc., Wheeling, USA) and Lucitone 199(Dentsply International Inc., York, USA). And the rebase resins were Repair Acrylic(Lang Dental Mfg. Co. Inc., Wheeling USA). Toughron Rebase(Miki Chemical Product Co. Ltd., Japan) , Tokuso Rebase(Tokuyama Soda. Co. Ltd., Japan) and Triad VLC Reline Material(Dentsply International Inc., York, USA). The obtained results were as follows : 1. The bond strength of Repair Acrylic to Premium Super-20, and that of Toughron Rebase to Lucitone 199 were the highest. 2. In Premium Super-20 and Lucitone 199, bond strength of all rebase resins had significant differences. 3. The bond strength of Triad VLC Reline Material was inclined to the lowset.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.123-129
• /
• 2021

Purpose: The purpose of this study was to investigate antifungal activity of shiitake mushroom yeast and hyphal type of Candida albicans. Materials and Methods: The extract from shiitake mushroom was collected by drying the supernatant after soaking shiitake mushrooms in water or ethanol. The antifungal activity of the extracts against yeast type of C. albicans was investigated by the susceptibility assay using microplate. C. albicans biofilm was formed on 12-well plate using Ham's F-12 medium in CO₂ incubator and treated with the ethanol extract. Furthermore, C. albicans biofilm was formed on denture base resin disk and treated with or without the ethanol extract in the presence of denture cleanser. Live C. albicans in biofilm was counted by cultured colony forming unit value after inoculated on agar plate. Results: Ethanol extract from shiitake mushroom showed stronger antifungal activity against yeast type of C. albicans compared to its water extract. The ethanol extract significantly reduced count of C. albicans in hyphal biofilm (P < 0.05). Also, the ethanol extract showed synergistically antifungal effect with denture cleanser on candidal biofilm on denture base resin disk (P < 0.05). Conclusion: The ethanol extract of shiitake mushroom may be a candidate for preventing candidal stomatitis as well as denture-related stomatitis.