• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.820-830
• /
• 1989

The tire inflation and contact problem has been solved by a finite element method. The finite element formulation is derived from the equilibrium equations by the principle of virtual work in the form of an updated Lagrangian formulation for incremental analysis. Then, a contact formulation is added to the finite element formulation to calculate stress state of tire in contact with flat rigid road under the load due to the self-weight of a vehicle. In the finite element analysis, equations of effective material properties are introduced to analyze a plane strain model of the shell-like tire by considering the bending effect of reinforced steel cords. The proposed equations of effective material properties produced stress concentration around the edge of belt layers, which does not appear when other well-known equations of material properties are adopted. The result from the above algorithm demonstrates the validity of the formulation and the proposed equations for the effective elastic constants. The result fully interprets the cause of separation between belt layers by showing the stress concentration.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.39-50
• /
• 2001

In this study, in order to investigate the effects of reinforcement length and vertical spacing on the factor of safety, the road embankment reinforced by geogrid was analyzed using RSS(Reinforced Slope Stability) program based on limit equilibrium analysis. The result by computer analysis showed that the factor of safety for reinforced slope increased with increasing length of reinforcement and with decreasing vertical spacing of reinforcement up to certain limit. Also, numerical analysis by FLAC was performed on reinforced slope to evaluate the horizontal displacement, horizontal stress, and distribution of tensile forces of reinforcements in the cases of several reinforcement length. The results of analysis showed that the critical failure mode was toe failure or slope failure and the effect by the additional reinforcement length on the slope stability was negligible under stabilized condition.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.705-712
• /
• 2008

This study carried out simulation for structural layout design for concrete structures by using the models of the ground structure method. The micro lattice truss is modeled as assemblage of a number of unit cells. The progress of analysis repeat to undergo finite element analysis to feed-back results of stress to the stiffness of each member. Through the repeated this analysis, truss model is represented to form the topological materials and the structural shape with the use of the local stress condition without mathematical optimum tools. It is successful to analyse the shape-layout problem as numerical samples on the lattice truss model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.346-351
• /
• 1997

The creep characteristics of an Al-5wt.% Ag alloy including the stress exponent, the activation energy for creep and the shape of the creep curve were investigated at a normalized shear stress extending from $ 10^{-5}{\;}to{\;}3{\times}10^{-4}$ and in the temperature range of 640-873 K, where silver is in solid solution. The experimental results shows that the stress exponent is 4.6, the activation energy is 141 kJ/mole, and the stacking fault energy is $180{\;}mJ/m^2$, suggesting that the creep behavior of Al-5 wt.% Ag is similiar to that reported for pure aluminum, and that under the current experimental conditions, the alloy behaves as a class II(metal class). The above creep characteristics obtained for Al-5 wt.% Ag are discussed in the light of prediction regarding deformation mechanisms in solid solution alloys.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.566-570
• /
• 2012

본 연구에서는 비선형 k-$\varepsilon$ 모형을 이용하여 직사각형 개수로에서 평균흐름과 난류구조를 모의하였다. 표준 k-$\varepsilon$ 난류모형은 난류의 등방성을 가정하여 국부적 평형상태에서 계산하기 때문에 유선에 따른 레이놀즈 응력의 변형이 큰 경우나 이방성이 강한 경우 이를 계산하지 못한다. 이를 보완하기 위하여 제시된 것이 비선형 k-$\varepsilon$ 난류모형이다. 본 연구에서는 표준 k-$\varepsilon$ 모형과 비선형 k-$\varepsilon$ 모형에 의한 모의결과를 비교하였다. 난류모형을 검증하기 위하여 직사각형 개수로에 흐름을 완전 발달된 등류로 가정하여 해석하였다. 지배방정식을 해석하기 위해 Patankar와 Spalding (1972)이 제시한 SIMPLER 알고리즘을 사용하였고 유한체적법을 이용하여 이산화하고 엇갈린 격자체계를 사용하여 계산에서 발생하는 과도한 진동을 줄였다. 또한 차분기법은 Patankar (1980)가 제시한 Power-law 기법을 채택하였으며 경계조건으로 2층 벽법칙 모형과 Hossain과 Rodi (1993)의 모형을 이용하였다. 두 모형의 적용성을 검증하기 위하여 실측자료를 이용하여 비교하였고 그 결과 비선형 k-$\varepsilon$ 모형이 표준 k-$\varepsilon$ 모형에 비해 좀 더 실측지에 가깝게 모의하는 것을 볼 수 있었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.18-25
• /
• 2016

Bascule bridge, with its use to help vessels ply, has a several examples overseas of being serviced for more than decades years by careful maintenance, admitted its significance as landmarks for its rareness. Yeongdo Bridge, the sole bascule bridge in Korea was reconstructed in 2013 after being demolished because of its corrosion and aging, and now operates once in a day. Recently, safety inspections are executed thanks to demands getting higher for maintenance and safety of bridges, but measurement and analysis about bascule bridges are scarce. This study includes the analysis of the bascule bridge's behavior such as stress, vibration and reaction in normal condition and while it lifts up, based on measurement. We expect that this study will be used as an initial data to compare and confirm bridge's changes as service year and the number of operation increase.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.39-52
• /
• 2022

Multilayer perceptron neural network was trained to determine the factor of safety and slip surface of the slope. Slope geometry is a simple slope based on Korean design standards, and the case of dry and existing groundwater levels are both considered, and the properties of the soil composing the slope are considered to be sandy soil including fine particles. When curating the data required for model training, slope stability analysis was performed in 42,000 cases using the limit equilibrium method. Steady-state seepage analysis of groundwater was also performed, and the results generated were applied to slope stability analysis. Results show that the multilayer perceptron model can predict the factor of safety and failure arc with high performance when the slope's physical properties data are input. A method for quantitative validation of the model performance is presented.

• Composites Research
• /
• v.30 no.6
• /
• pp.371-378
• /
• 2017

In this study, hygroelastic behavior of thermosetting epoxy is predicted by molecular dynamics simulations. Since consistent exposures to humid environments lead to macroscopic degradation of polymer composite, computational simulation study of the hygroscopically aged epoxy cell is essential for long-time durability. Therefore, we modeled amorphous epoxy molecular unit cell structures at a crosslinking ratio of 30, 90% and with the moisture weight fraction of 0, 4 wt% respectively. Diglycidyl ether of bisphenol F (EPON862) and triethylenetetramine (TETA) are chosen as resin and curing agent respectively. Incorporating equilibrium and non-equilibrium ensemble simulation with a classical interatomic potential, various hygroelastic properties including diffusion coefficient of water, coefficient of moisture expansion (CME), stress-strain curve and elastic modulus are predicted. To establish the structural property relationship of pure epoxy, free volume and internal non-bond potential energy of epoxy are examined.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.45-54
• /
• 2006

To obtain realistic stress-strain relation in concrete, it is necessary to improve the constitutive model for creep and shrinkage of concrete. This study is made up with predicting model of creep using rheological approach and mathematical development which is solution for phenomenon of concrete creep. Long-term deformation components are combined based on traditional 4-parameters model. Creep deformation is obtained adequately using 4-parameters determined by considering aging effect and microprestress among gels. And coefficient of effective viscosity is able to represent both basic creep and total creep included drying creep. This study attempt to establish mathematical model considering effects of aging, hydration, and variations of pore humidity. It can predict both basic creep and total creep. Values of result between prediction and experiment have greater than correlation factor 99%. Additionally experimental results report bad consentaneity with highway design specification adopting FIB MC 90. Rather than those are similar to FIB MC 90 rev.99.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.508-515
• /
• 2004

In this study, salting conditions and dehydration methods were investigated. Salting time, concentration and temperature could be considered to variables in salting conditions. The diffused salt amounts to beef jerky depending on time are sharply increased in two hours. This result is caused by the difference decrease of concentration gradient between bulk solution and beef jerky. The increase of salting concentration and temperature resulted also in the increase of a diffused salt. The deeper bulk concentration made diffusion to beef easily with the bigger driving force and the movement of molecules is more active according to temperature increase. Dehydration is conducted with various methods such as natural drying, cold air drying and hot air drying. Comparing with color and texture among the drying methods, cold air drying showed superior quality in color and texture. Beef jerky by cold air drying colored more reddish than other drying methods and good cutting shear stress and tensile strength. In case of hardness and chewiness, hot air drying method showed the highest value, which means the worst texture.