• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.71-76
• /
• 2012

Since sediment in a stable state is disturbed during the process from sediment in a natural state to dredged soil, the turbidity of water is not good. When the dredged soil settles again, the volume change in the sediment occurs. Coagulant and flocculant are added for turbidity mitigation of the water and faster settling process of suspended solid, and the amount of the substances affects the characteristics of the dredged soil. This study is to investigate the characteristics of the dredged soil depending on the amount of three chemical products added to the wet dredged soil and the dry dredged soil through measuring the suspended solids (SS), volume change and sedimentation velocity. The experimental measurements show that the SS decreased, the volume change rate increased, and the sedimentation velocity increased, as the chemical amount increased. In addition, it was found that the dry dredged soil reacted even with little quantity of the chemicals because derelict and microorganism are removed due to the drying process at $100{\pm}5^{\circ}C$.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.257-263
• /
• 2015

In this study, the quality of blast furnace slag and the engineering properties of recycled aggregate based mortar with variable replacement of blast furnace slag have been focused. Blast furnace slag(BS) manufactured in various areas in Korea were prepared for this study. For the investigation results, 4 types(among the all of 9 types) of the experimental results were identified as below the standard level when using blast furnace slag chosen from different factories. Especially the particle size of the blast furnace slag was considered as the largest problem. When using BS in the recycled aggregates based mortar, the increase amount of blast furnace slag, increased the fluidity but delayed the setting time and decreased strength at early age. Based on the relationship of the amount of BS and the engineering properties of mortar, this study found that the amount of $SO_3$ and L.O.I affect the setting time, 3 days strength and 91 days strength to the certain standard level.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.637-640
• /
• 2006

Corrosion from various causes of reinforcing steel in concrete structures not only shortened the life of structures but also it is necessary a great repair cost to return and protect to the health condition. Using Nitrite inhibitors is a typical protection method. But there is no materials for the study about corrosion protection using nitrite. Therefore it is important to evaluate the additional rate and influence on congealment using the nitrite inhibitors in cement paste which is originally the basic material and crucial factors consisting concrete. The purpose of this study is finding influence of the type of nitrite inhibitors and mixing ratio on congealment of cement paste, and finding best corrosion inhibitors and ratio in cement paste.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.387-388
• /
• 2010

In this study, early-age properties of mortar containing calcium chloride as an accelerator was investigated. The time of setting of the mortar by ultrasonic tester and penetrometer was assessed to prove its acceleration effect on hydration and the compressive strength was also measured to examine the effect of calcium chloride on the early-age strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.199-204
• /
• 2000

When fresh concrete is exposed to low temperature, the concrete may suffer from the frost damage at early ages and the strength development may be delayed. To solve such problems of cold weather concreting, admixtures called agent for enduring cold climate are developed to prevent the fresh concrete from being frozen at early ages In this study, the experiments are carried out on several kinds of agent for enduring cold climate to present their performance. According to experimental results, most kinds of agent for enduring cold climate show the satisfactory properties of decreasing the freezing point and acceleating the cement hydration in low temperature environment, which is available for placing concrete in spite of cold weather.

• Tribology and Lubricants
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1994

어떤 유체는 전기장에서 순간적으로 고체화한다. 이러한 다변형의 물질은 더욱 신속하고 적절한 기계의 앞날을 약속하고 있다. T-1000 (영화 터미네이터2; 심판의 날에서 생동하는 거의 불멸의 로보트)는 능숙하게 액체에서 고체로 변환다. T-1000은 총탄으로 관통되었을 때, 로보트의 액체-금속 피부는 관통된 구멍으로 흘러 들어가고, 산산조각이 났을때 T-1000은 녹아버린 후에 다시 제원형으로 응결된다. 전기유변성 유체는 이 영화제작자의 상상력에 어느 정도 적용될 수 있을 것이다. 전기유변성 유체는 전기장이 있는 곳에서 변형을 일으키는 물질이다. 주어진 전기장의 세기에 따라 전기유변성 유체는 물처럼 자유롭게 흐르기도 하고, 꿀처럼 진득하게 흐르기도 하며 제라틴처럼 고체화하기도 한다. 참으로 물질이 수천분의 일초사이에 한상태에서 다른 상태로 변할 수 있는 것이다. 전기유변성 유체는 만들기 쉽다; 절연액체에 미시적 입자가 분산된 것이다. 그러나 아직은 상업용으로 쓰이지 못하고 있다. 여러가지 문제점 중의 하나가 고체로서는 구조적으로 약하고, 또, 액체로서는 마찰성이 문제이며, 특히 고온에서는 화학적으로 불안정하다는 것이다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1242-1247
• /
• 2000

Results from a study on the effect of the chemical agent on the flowing and setting properties of high flowing.high strength concrete using blast-furnace slag are presented in this paper. The flowing and setting properties of concrete are investigated by slump, slump-flow, flowing velocity, L-flow, velocity of V-funnel, L-spatial passability and setting time. In addition, kinds of chemical agent were composed of naphthalene type, of naphthalene and melamine and melamine type. The results indicate that dispersive capacity can be increased by naphthalene composition. Also, it shows that viscosity and early strength can be increased by melamine composition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.413-416
• /
• 2005

The super early hardening cement is widely used for reducing construction period. But there are some problems with handling the cement because the loss of workability is so big to control. In this study, the fluidity properties of super early hardening cement paste was evaluated at early age of hydration by using gel-time determination method. 4 types of set controlling agent were selected and combinations of them were used for gel-time test. As a result, the gel-time of super early hardening cement paste was extended up to 20 minutes by using the combinations of several types set controlling agent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.74-75
• /
• 2021

This study attempted to study the setting time and compressive strength according to the sugar type through XRD. Setting time was found to be delayed the most when mixing white sugar, and setting time was promoted when mixing Saccharin and Aspartame. It was found that when white sugar and Grosvener siraitia were mixed, the compressive strength was higher than that of Control. Aspartame the age passed, C₃S decreased and Ca(OH)₂ increased.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.3 s.17
• /
• pp.101-107
• /
• 2005

This paper reports the contribution of Shrinkage reducing admixture(SRA) to the physical properties and drying shrinkage of concrete. Dosage of SRA is varied with. For the properties of fresh concrete, an increase in SRA dosage results in a decrease in fluidity and air content, while setting time is accelerated. For the properties of hardened concrete, the incorporation of mineral admixture leads to a decrease in compressive strength at early age, whereas after 28 days, the incorporation of fly ash(FA) and blast furnace slag(BS) has greater compressive strength than conventional concrete without admixture. The use of SRA results in a decrease in compressive strength. The incorporation of SRA with every $1\%$ increase causes the decrease of compressive strength by as much as $3\~6\%$. For drying shrinkage properties, the incorporation of FA and BS reduces drying shrinkage slightly. The use of SRA also decreases drying shrinkage. Every $1\%$ of increase in SRA dosage can reduce drying shrinkage by as much as $10\~15\%$