• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.227-236
• /
• 2003

Leaks in underground pipelines can cause social, environmental and economical problems. One of relevant countermeasures against leaks is to find and repair of leak points of the pipes. Leak noise is a good source to identify the location of leak points of the pipelines. Although there have been several methods to detect the leak location with leak noise, such as listening rods, hydrophones or ground microphones, they have not been so efficient tools. In this paper, acoustic emission (AE) sensors and accelermeters are used to detect leak locations which could provide all easier and move efficient method. Filtering, signal processing and algorithm of raw input data from sensors for the detection of leak location are described. A 120m-long pipeline system for experiment is installed and the results with the system show that the algorithm with the AE sensors and accelerometers offers accurate pinpointing of leaks. Theoretical analysis of sound wave propagation speed of water in underground pipes, which is critically important in leak locating, is also described.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.232-238
• /
• 1998

선박 방사소음은 군사적 목적의 수동소나가 탐지대상으로 하는 수중음향 표적이라 할 수 있다. 따라서 수동소나 운용자는 대잠전 수행이전에 다양한 선박들에 대한 방사소음을 측정, 분석하여 개별 선박 고유의 음향 특징을 수집함으로써 실전 상황에서 미지 선박이 탐지되는 경우 이들 자료를 식별의 기초자료로 활용하고자 한다. 또한 새로운 수동소나의 개발자나 스텔스 능력의 선박 설계자 역시 선박방사소음 특징자료를 필요로한다. 본 글은 선박방사소음의 발생기구, 측정시스템 및 측정자료의 분석 평가 기술을 연구분석한 내용이다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.4
• /
• pp.229-237
• /
• 2017

In this paper we propose an auto tonal detection method which exploits short term stationary when targets located in a detection beam area and then additional methods are proposed in order to reduce the computational complexity of the proposed method. The proposed method is adaptive to input signals and robust against interference caused by multiple targets because it compares an expected value of input signals with a threshold value which are estimated from a single beam while signals are keep stationary. The performances of the proposed methods are evaluated using by simulated data and acquired data from real ocean. The proposed method has shown better performance than conventional CFAR (Constant False Alarm Rate) methods.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1985.10a
• /
• pp.31-36
• /
• 1985

본 논문에서는 그레이더드인덱스 다중모드 광섬유에 압력을 가함으로써 발생되는 마이크로벤딩을 모드 결합 이론으로 분석하고, 그 이론에 의해 모드결합이 최적으로 일어나는 정적벤딩을 통한 주기성을 얻어 시제품 광섬유 음향 트렌스튜서를 설계 및 그것을 이용한 광섬유음향센서를 제작하였다. 제작된 트랜스튜서의 탐지가능한 최소검출압력을 정적벤딩 실험을 통하여 계산하였으며 아울러 제작된 광섬유음향트랜스듀서의 특성을 실험하였다.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.17-28
• /
• 2010

Since a homing torpedo system consists of various subsystems, organic interactions of which dictate the performance of the torpedo system, it is necessary to estimate the effects of individual subsystems in order to obtain an optimized design of the overall system. This paper attempts to gain some insight into the detection mechanism of a torpedo run, and analyze the relative importance of various parameters of a torpedo system. A database for the analysis was generated using a simulation model based on the combined discrete event and discrete time architecture. Multiple search schemes, including the snake-search method, were applied to the torpedo model, and some parameters of the torpedo were found to be stochastic. We then analyzed the effectiveness of torpedo’s detection capability according to the torpedo speed, the target speed, and the maximum detection range.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.54-60
• /
• 2000

Acoustic source localization using MUSIC etc. utilizes the propagation model in the medium. A plane wave model is a well-known source model for the identification of distant sources in the SONAR and a monopole source model becomes the one for the identification of rather near range sources. This paper introduces a dipole source model and a tripole source model consisting of one monopole and one dipole source. The simplifying procedures provide the simplified factors rather than the superposition of the relating monopole sources. The simulations show that the tripole model is useful in the general case including pure monopole, pure dipole, or pure quadrupole source identification.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.3
• /
• pp.139-146
• /
• 2018

Monostatic sonar systems localize targets using the time information of pulse transmission and receipt. Whereas, in asynchronous bistatic sonar systems, receivers need to detect direct blast to localize targets, since a source doesn't share pulse information with receivers. In this paper, we propose a direct blast detection algorithm, which estimates PRI (Pulse Repetition Interval) of direct blast and adaptive thresholds. Experimental results show the proposed algorithm has robust direct blast detection performance in the environment where strong background noise and target signal exist.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.86-92
• /
• 2001

Various array processing techniques to identify the noise source position or bearing have been developed. Typical array processing techniques which are based on time delay between received signals at two sensors, are classified as conventional beamforming, correlation function and NAH (Near-Field Acoustic Holography) techniques which have their own characteristics with respect to application field and signal processing method. In this study, correlation function technique which could be applied for broadband noise source detection, is adopted and the effective detection technique is proposed considering the effects of source bandwidth and measurement noise correlation of noise sources. The validity of the Proposed technique is evaluated using the 3-dimensional nonlinear any which does not give 3-dimensional Position or bearing ambiguity

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.149-153
• /
• 2008

General underwater target detection methods adopt short-time FFT for estimate target doppler. This paper proposes the efficient target detection method, instead of conventional FFT, using approximate FFT for distributed sensor network target detection, which requires lighter computations. In the proposed method, we decrease computational rate of FFT by the quantization of received signal. For validation of the proposed method, experiment result which is applied to FFT based active sonar detector and real oceanic data is presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.313-318
• /
• 2001

To establish nondestructive test method for aerospace composite materials, various composite specimens were tested and analyzed using acoutic emission. The hit rate of acoustic emission closely was rotated with crack initiation and propagation. This report also presents defection capability of crack initiation pressure, initial crack active location, and crack propagation using acoustic emission.