• Title/Summary/Keyword: 음향파워

Search Result 246, Processing Time 0.025 seconds

A Study to Estimate the Emitted Sound Power from the Rolling Stock (철도차량에서 방사되는 음향파워 추정에 관한 연구)

  • Lee, Young-Yeob;Kim, Jae-Chul;Lee, Hi-Sung
    • Journal of the Korean Society for Railway
    • /
    • v.14 no.3
    • /
    • pp.211-215
    • /
    • 2011
  • Generally, sound power is one of the most significant factors to predict and assess noise from sound sources. However, many researchers developed indirect methods to calculate the sound power with noise level because it is impossible to measure sound power directly while a train is running. In this paper, we propose a method to estimate sound power generated due to wheel/rail interaction and propulsive equipment from the measurement of noise emitted from rolling stocks and verify the estimation method by comparing with the other sound power estimation formula. We also analyze the sound power of rolling stocks which are operating in domestic lines such as EMU, Mukoonghwa, KTX using the method proposed in this paper.

Calculation of the ultrasonic radiation force acting on a rigid circular cone and the study on the metrology for the acoustic power measurement (강체원뿔표적에 대한 초음파 방사힘 계산과 음향파워측정모델에 관한 연구)

  • Kyungmin Baik;Jooho Lee;Elmina B. C. Fritzie;Yong Tae Kim
    • The Journal of the Acoustical Society of Korea
    • /
    • v.43 no.3
    • /
    • pp.335-343
    • /
    • 2024
  • This paper came up with the theoretical modelling of the metrology for the acoustic power using ultrasonic radiation force and showed some theoretical results. In order to do this, a scattering model for a rigid circular cone based upon the Kirchhoff approximation was made, which was followed by the calculation of acoustic power, and then, was converted to the radiation force. From these works, it provided the accuracy and limitation of the conventional method using a circular cone, and the expanded metrology modelling that can be applied to a circular cone with arbitrary apex angle. Using these, this study provided the dependence of the metrology for the acoustic power using ultrasonic radiation force on the frequency and the size of the target. As a result, the correction was yielded in the value of the acoustic power calculated by the suggested International Electrotechnical Commission (IEC) method, which needs to be added when the frequency and the size of the target was considered.

Acoustic Power Measurement System of Array Probes for Ultrasonic Diagnostic Equipment Using Radiation Force Balance Methods (방사힘 측정법을 이용한 초음파 진단장치용 배열 탐침자의 음향파워 측정시스템)

  • Yun, Yong-Hyeon;Jho, Moon-Jae;Kim, Yong-Tae;Lee, Myoung-Ho
    • The Journal of the Acoustical Society of Korea
    • /
    • v.29 no.6
    • /
    • pp.355-364
    • /
    • 2010
  • Considering biological safety, it is very important to measure acoustic power from ultrasonic array probe for diagnostic ultrasound imaging applications. In this paper, to measure acoustic power from each element on array probe for ultrasonic diagnostic equipment, we reconstruct and automate the acoustic power measurement system. The acoustic power from linear, phased and curved array were measured and analyzed. As a result of measurement, the effects caused by directivity of sound beam from curved array were founded. To remove these effects, we developed and applied the correction model. The proposed system is useful to evaluate characteristics of the acoustical output power of array probe.

A Study on Sound Radiation From Infinite Beams Under the Action of Moving Harmonic Point Forces (조화집중이동하중을 받는 무한보에서의 음향방사에 관한 연구)

  • 김병삼;태신호;홍동표
    • The Journal of the Acoustical Society of Korea
    • /
    • v.12 no.4
    • /
    • pp.39-46
    • /
    • 1993
  • 조화집중이동하중을 받는 무한보에서의 음향방사에 대한 연구는 선박, 비행기, 타이어 트레드 밴느 등과 같은 계의 설계시 계의 구조물로부터 발생하는 소음에 대한 해결방안을 제시해 준다. 구조물 표면에 발생하는 음향파워는 svktnqusghks방법을 이용하여 보의 전길이에 분포된 음향 인텐시티를 적분하여 구한다. 보의 표면에서 발생하는 음향파원는 미하수, 장력, 감쇠계수, 기초강성계수, 그리고 파수비에 의해서 결정된다. 각 인자에 따른 음향파워에 대한 정성적인 분석을 수행하기 위해 심프슨 적분방법을 이용하여 수치적분을 하였다. 무한보에 작용하는 유체하중에 3다라 진동에너지가 음향에너지로 변환되는 비율이 달라진다. 밀도가 큰 유체는 등가감쇠로 작용하여 보로부터 방사된 음향에너지는 빠르게 감소된다. 하중의 이동에 의하여 도플러이동효과가 발생하여 무한보의 공진부근에서의 음향파워 파크가 분리되고 보의 기초감쇠의 영향으로 음향에너지는 감소된다.

  • PDF

Thermoacoustic Power Generation by a Spiral Heater in the Rijke Tube (Rijke 관에서 나선형 가열기에 의한 열음향 파워의 생성)

  • Kwon, Young-Pil
    • The Journal of the Acoustical Society of Korea
    • /
    • v.29 no.8
    • /
    • pp.491-496
    • /
    • 2010
  • Thermoacoustic power generation by a spiral heater in the Rijke tube was analyzed numerically. In the analysis, variables were normalized by the angular frequency of the sound and the thermal diffusivity of the air. The effect of the heater wire diameter d, the spacing between wires P-d, and the air-current velocity $U_0$, upon the power generation was obtained and discussed. When the spacing is broad enough, the normalized velocity is $U_0{\approx}0.8$ and the diameter is $d{\approx}4$ for the maximum power generation. With decrease of the spacing, however, the power generation increases more than 5 times and becomes maximum around $d{\approx}2$, $P-d{\approx}3$. And the velocity $U_0{\approx}0.8$ for the maximum power generation is almost independent of the wire spacing.

Comparison Between Radiation Power and Beamforming Power of plate (평판에서의 음향 방사파워와 구면파 모델을 이용한 빔형성 파워와의 비교)

  • Kim, Young-Key;Kim, Yang-Hann
    • The Journal of the Acoustical Society of Korea
    • /
    • v.16 no.6
    • /
    • pp.12-18
    • /
    • 1997
  • Beamforming method has a limited spatial resolution because of finite aperture size, so that the estimated source distributions are smoothed within the resolution. Especially for low frequency noise such as mechanical noise, this limitation often diminishes the direct use of beamforming method. In this study, the relation between smoothed beamforming and radiation power distribution of plate has been addressed. By adjustment of aperture size of array, the smoothed beamforming power shows radiation power distribution of plate. Numerical simulations are carried for simply supported plate.

  • PDF

Numerical comparative study on high-fidelity prediction of aerodynamic noise from centrifugal fan system (원심팬 시스템의 공력소음 고신뢰 예측을 위한 수치 비교 연구)

  • Seo-Yoon, Ryu;Minseung, Jung;Younguk, Song;Cheolung, Cheong
    • The Journal of the Acoustical Society of Korea
    • /
    • v.41 no.6
    • /
    • pp.713-722
    • /
    • 2022
  • In this paper, the flow performance and aero-acoustic noise generated by the target centrifugal fan system were investigated numerically and experimentally. Also, the numerical method for Computational Aero-Acoustics were evaluated by comparing each method. To analyze the performance of the centrifugal fan experimentally, the acoustic power level was measured in the semi-anechoic chamber using microphones, and the active frequency range for the noise performance was identified and that frequency range was applied for Computational Aero-Acoustics (CAA) techniques as sampling frequency. Then, Navier-Stokes equation and the Ffowcs Williams&Hawking equations were used to analyze the flow and sound power numerically, respectively, and a virtual acoustic radiation plane was designed and used for the implementation of the sound field. The accuracy and numerical characteristics of the numerical methods were validated by comparing simulated acoustic power levels with acoustic power levels measured.

능동소음제어-제어음장의 물리적 성질 및 제어방법론

  • 김양한;강성우
    • Journal of KSNVE
    • /
    • v.5 no.4
    • /
    • pp.440-452
    • /
    • 1995
  • 이 글에서는 능동소음제어에 있어서, 음장 혹은 음원을 표현하는 물리량은 음향에너지, 파워, 인텐시티를 통하여 제어 가격함수로서의 각 의미를 살펴보았다. 졍리하면 이 세가지 물량들은 음향에너지의 균형이라는 물리적 변칙에 의해 서로 단단히 결속되어 있으며, 이들은 음장의 형태와 성격 그리고 파장과 주파수 등과 관련이 있으므로, 능동소음제어 입장에서 제어 목적에 맞게 적절히 사용할 필요가 있다고 볼 수 있다. 음향 에너지의 제어 개념 즉, 음향에너지를 가격함수로 하는 제어 방법은, 원하는 정숙공간(zone of quiet)을 제어할 때 그 적절성이 있음을 보았 으며, 음향 파워는 그 물리량 자체가 어떤 음원의 특성을 표현하고 있으므로 제어에 의하여 방사 효율을 감소(weak radiator)시키고자 할 때 가장 자연스러운 가격 함수 가 됨을 살펴보았다. 또한 음향 인텐시티라는 물리량은 음향 에너지의 전달 특성을 대표하는 특성임을 살펴보았고, 따라서 소음 전파의 감소(noise transmission reduction)를 위한 제어 가격 함수로의 당위성을 확인하였다. 이러한 모든 제어 방법 들이 사실은 가관측성 및 가제어성을 가져야 함은 주지의 사실이며, 음향 파워나 인텐시티를 가격 함수로 하는 제어 방법의 경우 실제적인 가관측성상의 문제점들로 인하여 그 현실성이 아직은 거리가 있다 하겠다.

  • PDF

Measurement of Acoustic Power Radiating from Each Channel of Linear Array Transducer for Diagnostic Ultrasonic Imaging System (초음파 영상 진단기용 선형 어레이 변환기의 채널별 음향파워 측정)

  • Yun Yong Hyeon;Jho Moon Jae;Kim Yong Tae;Lee Myoung Ho
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.351-352
    • /
    • 2004
  • 본 논문에서는 초음파 영상 진단기용 선형어레이 변환기를 장착할 수 있는 수조 와 128 채널의 스위칭 회로를 제작하여 변환기의 각 채널별 음향파워를 측정하였다. 실험은 128 채널 중 하나의 채널이 불량인 어레이 프로브를 대상으로 수행되었다. 측정 결과, 불량 채널의 음향 파워가 다른 채널에 비해 현저히 작게 나타남을 확인하였다.

  • PDF

Analysis of Wave-Energy Propagation on Vibrating Coupled Beam-Type Structures (보형상 복합구조물 진동체에서의 파동에너지 전파에 대한 해석)

  • 길현권;홍석윤
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.6
    • /
    • pp.74-78
    • /
    • 1998
  • 보로 이루어진 복합구조물의 진동 에너지밀도와 파워를 구하기 위하여 파워흐름해 석법을 수행하였다. 복합구조물인 연성보에서는 구조 연결점에서의 파동변환에 따라 굽힘파, 종파, 비틀림파가 존재한다. 구조연결점에서 파동들의 파워투과와 반사를 고려하기 위해서는 파동전달법을 도입하였다. 이러한 파워흐름해석법을 이용하여 연성보에서 발생하는 열러 특 성의 파동들이 전달하는 에너지밀도와 파워의 공간적 분포 값을 엄밀해와 비교하였다. 결과 로써 파워흐름해석법은 고주파수영역에서 진동하는 연성보의 진동에너지와 파워의 공간적 분포를 예측하기 위해서 유용하게 사용될 수 있음을 보였다. 또한 파워흐름해석법의 중주파 수 영역에서의 적용 가능성에 대해 검토하였다.

  • PDF