• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.768-768
• /
• 2011

선박/잠수함에 설치하는 소나(sonar)는 외부 해양 환경 및 유체 흐름을 위해 소나 돔을 설치하여 운용한다. 하지만 소나 돔 설치로 인해 핵심 기능인 음향신호 송/수신 기능 저하를 야기 시킨다. 따라서 소나돔을 설계시, 구조적으로는 수중 폭팔 등의 각종 하중으로부터 센서를 보호할 수 있도록 설계하고 음향적으로는 음파의 송수신 신호를 저하시키지 않는 재질을 고려하여 설계 및 제작을 하여야 한다. 소나돔에 의한 음향 손실을 최소화하기 위하여 설계 시, 소나돔음향창 시편을 통하여 음향신호가 이를 투과하면서 생기는 신호 왜곡 혹은 투과 손실 측정을 수행한다. 제한된 크기의 수조 시험장에서 투과 손실이 측정이 되는데, 음원 반사, 회절(diffraction) 등의 문제로 인하여 다양한 주파수 대역에서의 측정이 불가피 하다. 이때, 좁은 빔폭 (Beamwidth)을 갖는 Parametric array를 이용하여 음원 회절이 생기지 않는 범위 내에서 음향창 시편의 크기를 최소화 시킬 수 있으며 제한된 공간에서도 효율적으로 음향창 시편의 투과 손실을 측정 할 수 있다. 본 논문에서는 parametric array를 이용하여 음향창 시편의 크기를 최소화 하고 이를 이용하여 음향창 투과 손실을 측정하는 연구를 수행하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.131-134
• /
• 2000

음성신호처리에서 스펙트럼 분석은 매우 중요하다. 하지만 스펙트럼 분석을 위해서 사용되는 윈도우에 의해 생기는 누설에러지 때문에 음성신호의 스펙트럼 정보가 왜곡된다. 본 논문에서는 스펙트럼 분석 시 발생되는 창함수 사용에 의해 생기는 누설에너지를 최소화하기 위한 새로운 창함수를 제안하고자 한다. 그 형태는 전체 창함수크기의 반을 방형창으로 나머지 반을 해밍창으로 하고 창의 처음 부분은 $\pm$20표본에서 영점을 찾아주는 것이다. 이 창함수의 특징은 신호분석에 있어서 왜곡은 크지만 그 형태에 있어서 가장 이상적인 방형창함수의 장점과 side lobe가 작아 비교적 왜곡이 적은 해밍창함수의 장점을 취한 것이라 하겠다. 실제 음성 신호에의 적용에 있어서 방형창과 해밍창의 적용비는 신호의 종류 및 용도에 따라 달리할 수 있다. 제안한 창함수는 해밍창함수 보다는 좁은 main lobe 특성으로 음성신호의 단구간 스펙트럼 분석시 음성의 빠른 변화특성을 적절히 보여줄 수 있고 방형창보다는 side lobe의 영향을 줄일 수 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.375-381
• /
• 2021

This paper investigated sound characteristics by the delamination of an acoustic window. In detail, acoustic scattering and transmission characteristics on the delaminated acoustic window were estimated using an experimental and numerical approach. The experiment results showed that acoustic wave could lose its amplitude and take phase delay when it propagates the delaminated acoustic window. The numerical results showed that scattering phenomena occur on the delamination surface. The scattering characteristics presented differently according to the delamination size in the acoustic window. It also showed that transmitted sound distortion due to delamination could cause a direction detection error of SONAR by changing the position of the main lobe and the magnitude of the side lobe. In conclusion, the delamination has to be managed during the manufacturing process of acoustic windows.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.147-150
• /
• 1999

본 논문에서는 Cross-Spectrum법에 의한 임펄스 응답을 추정할 때의 창함수의 영향을 살펴본다. 여러종류의 창함수에 대해 전달함수의 지연시간과 창함수의 길이의 관계를 조사하고, 측정에 의해 비교 확인하였다. 음향 전달계의 임펄스 응답 추정치의 평가식을 이용하여 창함수중 Riesz 창함수의 추정 정확도가 대체로 양호함을 확인했다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.481-488
• /
• 2018

This study suggest the improvement of the CFRP adhesive mixing ratio about acoustic window to enhance SONAR performance. The CFRP of submarine is produced by allocation an acoustic window zone by the beam width of SONAR sensors. During the sea trial, SONAR system's bearing and range accuracy data is not in tolerance due to debonding phenomenon on CFRP. The inappropriate mixing ratio of adhesives caused that peeling phenomenon occurred in the acoustic window part, which is the reason for the deterioration of SONAR sensors performance. The report includes explanation of test procedure of SONAR, root cause analysis, CFRP manufacturing procedure, laboratory tests results, and proof of the performance at the sea trial.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.34-41
• /
• 1990

The energy parameter is widely used in pre-processing of speech signals, because it represent the phoneme characteristics of well But, the energy parameter is affected by the window length during the extracting. Thus, in this paper, the window length effects are studied in detail, and we proposed a new energy extraction algorithm that reduces the length effects. The energy contours with this algorithm are well representing for the characteristics of speech phonemes. And the computations to implement the algorithm are only required one subtraction, one addition, and two comparison aperation per speech sample.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.729-738
• /
• 2006

Knowledge of acoustic transmission loss of acoustic window material has a great importance for the sonar performance in ship. The purpose of this study was to investigate the measurement and analysis method for the acoustic transmission loss of the acoustic window materials for sonar dome. The measurement and analysis were carried out in water with GRP material. Transmission losses were calculated based on integrated direct and transmitted signals. The experimental setup enabled to vary the angle of incidence. Thus the transmission loss data could be expressed as the function of frequency and angle of rotation. In this paper, diffraction effect of incident angle, size of specimen with test material, transmission analysis method and multiple waves as incident acoustic signal were discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1183-1189
• /
• 2006

Knowledge of acoustic transmission loss of acoustic window material has a great Importance for the sonar performance in ship. The purpose of This study was to investigate the measurement and analysis method for me acoustic transmission loss of the acoustic window materials for sonar dome. The measurement and analysis were carried out in water with GRP material. Transmission losses were calculated based on integrated direct and transmitted signals. The experimental setup enabled to vary the angle of incidence. Thus the transmission loss data could be expressed as the function of frequency and angle of rotation. In this paper, diffraction effect of incident angle, size of specimen with test material, transmission analysis method and multiple waves as incident acoustic signal wet-e discussed

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.111-114
• /
• 1998

Acoustical holography is one of the powerful methods in sound radiation problems. Just measuring hologram data on a plane, one can calculate whole space physical quantities such as pressure, particle velocity, and sound intensity. However, the use of finite and discrete operations introduce significant errors inevitably. This paper reviews error reduction schemes, and introduces error analysis criteria derived from modal analysis. Finally the effect of window functions is investigated by these criteria.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.4
• /
• pp.82-88
• /
• 1995

Conductance and susceptance of the self-radiation impedance in a rectangular acoustic sensor without baffle are measured experimentally. Finite polyurethane window is mounted at the end of the acoustic sensor. The sensor radiation impedance is cauculated using the equivalent electric circuit. Using the Levine's integral equations of a rectangular piston mounted to the rigid infinite baffle, radiation resistance and reactance were simulated numerically. Numerical and experimental results are compared to each other.