• Title/Summary/Keyword: 음향정재파

Search Result 11, Processing Time 0.031 seconds

A Study on the Stack Temperature Profile of a Standing Wave Thermoacoustic Cooler (정재파 열음향 냉각기의 스택 온도구배에 대한 연구)

  • Paek, In-Su
    • The Journal of the Acoustical Society of Korea
    • /
    • v.28 no.1
    • /
    • pp.19-24
    • /
    • 2009
  • Investigations of the relation between the stack temperature profile of a standing wave thermoacoustic cooler and the cooling efficiency were performed. Based on the mathematical derivations using the Rott Equation, it was found that the temperature profile along the stack becomes nonlinear as the enthalpy flux passing through the stack increases. It was also found that such nonlinear temperature profiles lower the cooling efficiency. Simulations using a thermoacoustic simulation program called DELTAE showed that the nonlinear temperature profile occurs with a long stack and large cooling load.

Characteristics of Particle Separation in Water Using Lab-Scale Acoustic Standing Wave (실험실 규모의 음향정재파를 이용한 수중의 입자분리 특성)

  • Ahn, Jaehwan;Kang, Sungwon;Ahn, Kwangho;Kim, I tae;Kim, Seog gu;Ahn, Hosang;Lee, Youngsup
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.12
    • /
    • pp.787-791
    • /
    • 2012
  • Characteristics of particle separation in water using labscale acoustic standing wave were studied. Acoustic standing wave is similar to either sound wave or ultrasonic, which makes a constant wave while returning to the origin by reflector. During that time, particulates dispersed in water are collected on the node of wave, where a sound pressure is zero. Acoustic standing wave transducer as of 28.0 kHz and 1.0 MHz were utilized and $6.8{\mu}m$ kaolin and $100.5{\mu}m$ redmud in average diameter were used as experimental materials in water. Once acoustic standing wave are generated in water, water temperature rises by $0.15{\sim}0.20^{\circ}C/min$ due to a sound pressure. Initial concentration of kaolin and redmud were controlled to have same as of 0.1, 0.2, 0.3, 0.4, 0.5 g/L, respectively. Removal efficiency of the turbidity in a reacting chamber after 5 minutes, when acoustic sound wave was formed in most distinct, was measured to have 18.2~56.2% for kaolin and 23.0~53.6% for redmud at 1.0 MHz. Particle separation was not observed at 28.0 kHz.

HID 램프용 전자식 안정기 회로 및 특성 이해

  • 김기정
    • Electric Engineers Magazine
    • /
    • v.230 no.10
    • /
    • pp.30-33
    • /
    • 2001
  • 음향공명 발생원인 가스가 들어있는 방전관내에 방전전류가 흐르면 전력에너지가 발생하여 열을 발생 시키고 이 열은 방전관내의 압력변화를 가져온다. 이 압력변화는 방전관내의 음향변화와 같다. 주기적인 압력변화가 내벽에 반사되어 정재파가 발생되는 현상이 방정관의 고유진동수이며 이 고유진동수와 전원주파수가 일치될 때 음향공명현상이 일어난다.

  • PDF

A Study on Standing Wave Type Ultrasonic Linear Motors (정재파형 초음파 리니어 모터에 관한 연구)

  • 권재화;이수성;강국진;노용래
    • The Journal of the Acoustical Society of Korea
    • /
    • v.20 no.8
    • /
    • pp.38-43
    • /
    • 2001
  • We developed a new standing wave type ultrasonic linear motor that can be driven bi-directionally. The operation principle of the motor was derived in an analytical form and the detailed structure was designed by the finite element method. Based on the design, a motor sample and a driving circuit were fabricated, and validity of the structure was verified through experiments.

  • PDF

Fabrication and Evaluation of Ultrasonic Bi-directional Linear Motors (양방향성 초음파 리니어 모터의 제작 및 특성 평가)

  • Kwon Jae-Hwa;Lee Su-sung;Roh Yongrae
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.193-196
    • /
    • 2001
  • 본 연구에서는 원활한 정재파 생성과 양방향 구동이 가능한 새로운 형태의 초음파 리니어 모터를 제작하고, 그 특성을 평가하였다 본 연구에서 제안한 모터는 $\lambda/4$ 간격으로 이빨 구조를 가지는 스테이터의 상, 하부에 압전소자를 $90^\circ$ 의 위치 위상차를 갖도록 부착한 형태의, 상, 하부 압전소자에 각각 동위상, 180도의 시간 위상차를 가지는 교류 전압을 인가함으로써 양방향 구동이 가능하도록 하였다. 또한 원활한 정재파를 생성할 수 있는 최적의 구조를 결정하기 위해, 여러 가지 형태의 경계조건들에 대해 유한요소해석법을 이용하여 모델링하여 각 이빨들의 변위를 관찰함으로써 각각의 구조에 대해 타당성을 검증하였다. 위 결과를 바탕으로 세 종류의 초음파 리니어 모터를 제작하여 구동실험을 하였고, 실험 결과에 따라 속도와 추력 및 양방항성이 가장 우수한 최적의 구조를 결정하였다. 본 연구에서 제작한 모터는 최대 82.4cm/s의 속도와 0.46N의 추력을 가졌다.

  • PDF

Characteristics of Micro-Particle Separation according to HRT Changes (HRT 변화에 따른 미세입자 분리 특성)

  • Ahn, Kwangho;Ahn, Jaehwan;Kim, I-Tae;Kim, Seoggu;Kang, Sungwon;Park, Eunzoo;Lee, Youngsup
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.12
    • /
    • pp.937-942
    • /
    • 2013
  • Fluid generated within the sonic or ultrasonic waves are reflected by the wall, while the opposite direction forming a predetermined sound wave to the acoustic standing wave is referred to. In this study, the frequency of 1.0 MHz and 2.0 MHz acoustic standing wave generation module is installed in a continuous particle separation device, the laminar flow of influent, taking into account the hydraulic retention time (HRT) in accordance with changes in particle separation characteristics investigated. Operation of a standing wave in the particle separation device about $1.3{\sim}2.8^{\circ}C$ temperature is increased, but did not significantly affect the formation of standing waves. During operation, the HRT 1 hr frequency 1.0 MHz 2 hr, 4 hr longer as the particle separation efficiency (turbidity) were 64.1%, 70.0%, 74.3% and, 2.0 MHz has 58.0%, respectively, depending on HRT, 61.8%, 70.7% in the respectively. That is, the same frequency, the HRT treatment efficiency is 10% or more, depending on differences in generation and, 1.0 MHz frequency, 2 hr, 2.0 MHz 4 hr at about 70% or more of the processing efficiency can be maintained. Frequency of 1.0 MHz and 2.0 MHz operation at the same time, as a result, HRT 1 hr, 2 hr, 4 hr particle separation efficiency of 63.8%, respectively, 70.6%, 77.6%, rather than the generation of standing waves appear continuous HRT is affecting a lot of particles to separate could know.

A Method for Noninvasive Diagnosis of Bone using Ultrasonic Doppler Method (초음파 Doppler법에 의한 생체 경조직의 비침투적인 진단을 위한 기초실험)

  • 박무훈
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.7
    • /
    • pp.3-11
    • /
    • 1998
  • 본 논문에서는 분포정수선로의 간단한 모델을 이용해서, 외부에서 진동을 가했을 때 에 뼈 표면에서 발생하는 굴곡파의 전파속도와 종파의 전파속도를 구할 수 있는 새로운 측 정원리를 제안했다. 이 측정원리를 이용해서, 봉(brass, polymethylmethacrylate)표면에 발생 하는 정재파에 대한 속도의 공간분포를 laser Doppler법으로 측정해서, 각각의 주파수에 대 한 전파속도를 구했다. 이 새로운 측정방법은 in vivo에서 초음파 Doppler법을 이용해서 뼈 의 이상(골다공증, osteoporosis)진단의 가능성을 제시했다.

  • PDF

Sound transmission loss through finite single partitions: the relative contribution of resonant transmission component (유한한 단판의 차음 성능: 공진 투과 성분의 상대적 기여도)

  • Lee Jong-Hwa;Ih Jeong-Guon
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.207-210
    • /
    • 2004
  • 단판의 차음 성능 해석에 있어서 무한판과 유한판의 가장 큰 음향학적 차이는 유한한 경계에 의해 발생하는 정재파에 있다고 할 수 있다. 하지만, 일치 주파수 이하에서는 진동 공진이 발생하더라도 음향방사효율이 비교적 작고, 따라서, 비록 그 진동 응답이 크더라도 절대적인 음향 방사 양은 작다. 이를 근거로 대부분의 유한판 해석은 비공진 성분에 국한되어 왔으나, 특정 경우 공진 투과 성분을 무시하면 해석 결과에 오차가 발생할 수 있음이 제시된 바 있다. 본 연구에서는 유한 단판의 차음 해석에 있어서 공진 투과 성분의 상대적 기여도를 수치적 해석을 통해 알아보고, 이로부터 공진 투과 성분이 해석치와 측정치 사이의 정량적 상관도에 미치는 영향을 분석하였다.

  • PDF

Correlation between reverberation time and standing wave (잔향시간과 정재파의 상호관계)

  • 차일환
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.10 no.5
    • /
    • pp.31-38
    • /
    • 1973
  • The Sabine's formula has been widlely used for calculating reverberation time and applied for actual systems. The result of Sabine's method is only same as the reverberation time of one axial wave according to the wave theory. Reverberation time is mainly dependent on the standing waves. In case of the rectangular room the frequencies of three mode covering 250Hz and several intensities at various positions of the room were measures by a spectrograph. It wart found that axial wavers and tangential waves decayed more slowly than oblique waves. The experimental results showed that the amount of axial and tangential wave in a frequency band varies depending on the position in the room. It is concluded that the results give to control reverberation times in a room.

  • PDF

Design for the Reflection Free Zone with the Adequate Initial Time Delay Gap at the Control Room (음향조정실에서 적절한 초기지연시간을 갖는 무반사지역의 설계연구)

  • Rhee, Esther
    • The Journal of the Acoustical Society of Korea
    • /
    • v.26 no.1
    • /
    • pp.32-41
    • /
    • 2007
  • The control room has been usually designed by the consideration of only one listening position for the sound engineer. By this study. many listening positions with the very similar acoustical condition were located in the specific region, so-called 'the reflection free zone', where the several engineer could evaluate the quality of sound at the same time. For constructing the reflection free zone, the control room has been designed by the concept of the $LEDE^{TM}$, and the initial time delay gap has been controled by the structure of control room and the properties of sound-absorbing materials. diffuser, Helmholtz resonator and image source of sound. The occurrence of any harmful phenomena like the standing wave, acoustic focusing. coloring. Hass effect and flutter echo, has greatly reduced in the reflection free zone.