• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.439-442
• /
• 2002

구형 배플을 가진 피스톤 음원에 대한 방사임피던스 특성을 유한요소법과 하이브리드형 무한요소법을 사용하여 수치해석하였다. 강체 구형 배플에 있어서 피스톤 음원의 방사면 크기에 따른 자기방사임피던스 변화와 피스톤 음원간의 상호방사임피던스 변화를 고찰하였다. 방사면의 크기에 따라 자기방사임피던스 변화 및 음원간의 상호방사임피던스 변화를 검토한 결과 알려진 해석해와 일치하였다. 또한, 비강체 구형 배플의 특성 임피던스 변화에 따른 자기방사임피던스 및 음원간의 상호방사임피던스 특성 변화를 고찰하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.217-222
• /
• 1995

소음기의 음향 성능을 평가하기 위해서는 음원의 임피던스를 알아야 한다. 음원의 임피던스를 구하기 위한 많은 연구가 행해졌고 정재파법, 음향전달함수법, Two Load Method(TLM), Four Load Method(FLM)등이 여러가지 방법이 개발되었다. 정재파법은 저주파수에서 음원의 출력보다 큰 출력음을 발생시킬 수 있는 스피커가 있어야 하고, 주파수별로 반복 측정해야 하는 번거로움으로 인해 실험에 어려움이 따른다. 전달함수법과 Two Load Method(TLM)는 관내에서 음압을 측정해야 하는데 엔진의 흡배기계와 같이 음압이 높거나 고온의 가스 유동이 있는 경우 측정이 매우 어렵다. 한편 Four Load Method(FLM)는 외부의 방사 음압을 측정하여 음원의 특성을 구하기 때문에 위에서 언급한 문제점들이 없는 반면에 무향실을 이용해야 한다. 본 논문은 음원의 임피던스 측정의 여러 방법 중 FLM에 의하여 스피커 음원의 임피던스를 측정하고 삽입손실을 구하면서 FLM이 가진 문제점을 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.1
• /
• pp.54-60
• /
• 2003

The characteristics of radiation impedance for piston source on a spherical baffle are analyzed by algorithms which consists of Finite Element Method (FEM) and Hybrid type Infinite Element Method (HIEM). The results of self-radiation impedance for radiation angle and mutual radiation impedance between piston sources coincided with other reports on the spherical rigid baffle. For the spherical non-rigid baffles, the variations of self-radiation impedance and mutual-radiation impedance are identified. Therefore, these results can be applied to design and radiation characteristics analysis of acoustic transducers.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.76-82
• /
• 2001

Most fluid machines can be considered as periodic noise sources when operated under constant conditions, which allows for a frequency domain representation of the source and the associated acoustic field In the duct. In such a representation, the source is characterized by frequency-dependent values of both strength and impedance. Although knowledge of these values can be gained by either experimentation or by modeling, one-port acoustic characteristics of an in-duct source with high flow velocity, high temperature, and high sound level can be measured only by the multiload method using an overdetermined set of open pipes with different lengths as applied loads. However, the problem is that negative source resistances have been often measured. This paper reviews the possible causes of the problem, with reference to experimental and theoretical results, in an attempt to clarify the issue. A new interpretation is given for the violation of basic assumptions and the defect in the algorithm of multiload method. The major cause and mechanism of the problem is due to the violation of time invariance assumption of the source and the load impedance can seriously affect the final measured result of source impedance.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.85-89
• /
• 2000

In this paper, by extending the previously developed self- and mutual-radiation impedance calculation method for a regular-square vibrating surface by using numerical series, we proposed a method to obtain the self-radiation impedance of a rectangular transducer with an arbitrary integer ratio of the length to width. The proposed method exhibits high accuracy and a short computation time. After investigating the accuracy and computation time as the number of elements changes, we have calculated the self-radiation impedance of several rectangular transducers, and compared the results with those in the literature.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.3-6
• /
• 2000

Because the generally reported radiation impedance has been calculated for vibrating surface with infinite baffle, the results have difficulties to apply for design of the real transducers with finite baffle. In this paper, with assuming a vibrating surface as a set of small point sources, a new calculation method for the vibrating surface with finite baffle is suggested by considering the effect of finite baffle on the source strength of each point source. As an example, the variation of self-radiation impedance for rectangular vibrating surface is calculated according to the size of baffle. The results show that the suggested method is useful.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.8
• /
• pp.668-674
• /
• 2004

The possibility of global noise reduction by the sound power control through selection of distribution and impedance of absorptive materials is discussed. It is necessary to investigate the relation between the global sound energy in the field and the total sound power radiated by sources. In the previous work,$^{(1.2)}$ the authors presented a useful design method to change boundary condition that can be useful to reduce noise in acoustically small enclosures. Changing boundary condition Is related to not only enclosure’s geometrical shape but also acoustical treatment on walls for example, attaching of impedance patches (ex: absorptive material). In many practical situations, we often meet situation to change acoustical treatment on walls. The possibility of total acoustic potential energy(globa1 noise) reduction by acoustic source power control is examined in an acoustically small cavity Using acoustic energy balance equation, the relation between global noise control performance and absorptive material’s arrangement/impedance is deduced. Numerical simulation is performed to interpret its physical meaning in terms of absorbent’s distribution and impedance.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.445-448
• /
• 1998

고유음향 임피던스가 다른 물질이 층상구조를 이루고 있는 매질내에서 임의의 한 층에 형성된 이차원 초음파 음장이 다른 매질로 전파될 때에의 특성을 각스펙트럼법에 의해 해석하였다. 음원으로서는 baffle된 원형 트랜스듀서를, 층상구조를 매질로서는 물과 생체조직(지방)의 경계를 각각 고려하였다. 해석에 있어서는 먼저 각스펙트럼 분해요소, 즉, 음원의 크기 및 거리에 의존하는 기준음장의 최적 크기와 샘플링 간격을 균질매질을 이용하여 결정한 다음, 그 요소를 층상매질에 적용하였다. 그 결과, 경계면에서의 입사각(공간주파수)의 의존하는 투과계수에 입사음장의 곱으로 나타내어지는 투과음장은 각스펙트럼법에 의해 짧은 시간내에 정도 높게 산출될 수 있음을 보인다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.561-564
• /
• 2004

방음벽의 상단모서리는 방음벽의 차음효과를 저하시키는 또 다른 허상음원으로 작용하며 이 현상은 저주파수 영역일수록 두드러지게 나타난다. 이 논문에서는 능동소음제어장치를 통해서 상단 모서리 표면의 음장을 최소화함으로써 표면임피던스의 변화를 통한 상단모서리 주변의 소리에너지의 역학과 원거리 음장에서의 효과를 고찰한다. 능동제어장치를 함유하는 상단모서리를 수학적으로 모델화하여 음장의 분포와 소리의 세기, 능동제어 효과에 영향을 미치는 조건들을 검토하였다. 수치해석적 연구를 통하여서 효과적으로 방음벽의 차음효과를 높이는 최적의 조건을 제시하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.104-112
• /
• 2003

The in-duct acoustical sources of fluid machines are often characterized by the source impedance and strength using the linear time-invariant model. However, negative resistances, which are physically unreasonable, have been found throughout various measurements of the source properties in IC-engines and compressors. In this paper, the effects of the time-varying nature of fluid machines on the source characteristics are studied analytically. For this purpose, the simple fluid machine consisting of a reciprocating piston and an exhaust is considered as representing a typical periodic, time-varying system and the equivalent circuits are analyzed. Simulated measurements using the analytic solutions show that the time-varying nature in the actual sources is one of the main causes of the negative source resistances. It is also found that, for the small magnitude of the time-varying component, the source radiates large acoustic power if the piston operates at twice the natural frequency of the static system. or integral submultiples of that rate.