• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.235-240
• /
• 1998

The inlet pressure build-up at the leading edge of bearings and its effects on the static performances are investigated theoretically. The performance analyses of air-lubricated tilting pad bearings are carried out considering the inlet pressure which is obtained by means of momentum conservation method. The results show that inlet pressure is above atmosphere pressure in front of leading edge of tilting pad bearing and there is a significant influence of the inlet pressure on the performance of bearings.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.142-150
• /
• 1997

A numerical analysis is carried out to study the effect of piston shape on the lubricaton characteristics between the cylinder and piston in hydraulic piston pump. The shapes of piston affect significantly the pressure distributions, the lateral force and leakage flowrate. Composite shaped piston is more effective than other shapes which not only reduces the possibility of hydraulic locking but improves the volumetric efficiency of the piston pump.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.256-262
• /
• 1998

Many lubricated systems experience boundary, lubrication condition during operation. However, the friction and wear characteristics of boundary lubrication are not clearly understood. In this work the factors which affect the friction and wear between boundary lubricated metallic surfaces are investigated. Experiments were performed on atuminium, copper, and SM45C with bearing ball using a pin-on disk type tester. The experimental conditions were determined by Taguchi experimental method. From the experimental results, the major factors that influence the friction and wear characteristics of boundary lubrication could be identified.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.82-90
• /
• 1998

Machines that normally operate under fluid film lubricated condition also experience surface damage. This is largely due to the failure of the lubricant film which leads to boundary lubrication. Thus, it is important to have a good understanding of boundary lubrication behavior. In this paper the major tribological parameters that influence the boundary lubrication properties are evaluated. It is shown that disk roughness, hardness and normal load affect the friction and wear of metals in boundary lubrication. Also, the mechanism of surface damage is attributed to abrasion and wear particle interaction.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.236-242
• /
• 2001

In this paper the effect of bump compliance, load, and the number of pad on the lift-off speed is studied. When the load is greater and bump compliance lower, the shaft is lifted off at higher rotating speed. And when the load is applied near the center of pad, lift-off speed is lower. When the number of pad increases, the lift-off speed is higher. The lift-off characteristics can be used to lengthen the life time of the coating and design the rotating machinery supported by bump bearings.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.113-116
• /
• 1996

기유의 soot 분산 성능 실험과 엔진유의 산화 및 분산성 실험을 하여 다음과 같은 결론을 얻었다. 1. 윤활기유는 soot의 분산 성능에 매우 큰 영향을 미치며 고급 기유일수록 soot의 함량이 클수록 우수한 성능을 보인다. 2. VHVI 기유는 산화 시험 시간이 경과할수록 광유계 기유보다 우수한 산화안정성을 나타낸다. 3. 산화방지제는 산화방지뿐 아니라 분산성에도 영향을 미친다. 4. 광유계 기유를 사용한 경우 ZnDDP는 산화 방지 및 분산성을 향상 시키지 못하나 VHVI 기유에 ZnDDP를 투여한 경우에는 산화방지효과와 분산성능을 향상시킨다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.126-132
• /
• 1996

A laboratory scale hot strip rolling wear simulator(HRWS) was developed for the purpose of investigating the tribological phenomena occurred in production hot strip rolling mills. The HRWS' main parts are the electric heater, the mechanical descaler, tandem type 2-4Hi rolling mill stands, the cooling chamber, the tension controller and coiler. By simulating the tribelogical phenomena in rolling process at laboratory, wear patterns, cracks, cat-ear wear, black film, effect of hot rolling oil lubrication, etc. were reproduced, and discussed on the performace of simulator.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.21-28
• /
• 2005

In the hot forging process lubricant influences on frictional condition only, but in the warm forging process it influence on the formability such as dimensional accuracy, filling state and frictional condition and it is important to estimate a lubricating characteristic of lubricants in the warm forging. In this paper, in order to evaluate the formability of billet in warm forging process according to the lubricant and lubricating method, lubricant and lubricating test have been performed using oil-based and water-based lubricant which were widely used in the hot and warm forging processes. The surface roughness of initial billet was measured to evaluate the influence on the formability of billet and the forming load and dimensional accuracy were compared and evaluated. From the experimental results, it can be known that water-based lubricants are more excellent than oil-based lubricants for warm forging of complex shape like a bevel gear. Also, in this study characteristics of deformation have been investigated according to surface treatment of initial billet.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.841-845
• /
• 1995

In this study, a motor-integrated high-speed spindle system with .psi. 65mm*25,000rpm is developed by introducing the oil-jet lubrication method,ceramic angular contact ball bearing, a built-in motor and so on. And oil-jet lubrication experiments for evaluating the system performance are performed under various operation conditions. Especially, in order to establish the oil-jet lubrication conditions related to the development of a high-speed spindle system, the effects of oil supply rate and rotational spindle speed are investigated on the temperature rise, temperature distribution,motor current and so on.

• Tribology and Lubricants
• /
• v.9 no.1
• /
• pp.9-15
• /
• 1993

Tribology는 미끄럼 혹은 구름베어링, 피스톤링, 기어, 공구, 그밖의 상대적 움직임하에 있는 부품의 설계 및 제조와 관련된 학문이다. 또한 tribology는 서로 접촉하는 재료의 적절한 사용, 윤활유와의 상호작용 이해 및 적절한 선택을 통해 마모와 마찰의 감소 혹은 최적의 마찰(브레이크, 벨트 등의 경우)을 위해 연구되는 분야이다. 부품의 내마모성을 향상시키고 적절한 마찰계수를 얻기 위해서는 기계 설계, 윤활유 선택 및 개발, 재료의 선택 및 개발 등 여러 분야의 기여가 모두 필요하다. 지금까지는 전통적으로 사용되어 오던 재료, 특히 금속재료를 중심으로 하여 기계 및 윤활제 개발 등에 치중하여 왔다. 그러나 산업이 발전되고 복잡화됨에 따라 극한 분위기 즉 고온, 고진공하에서의 장시간 사용과 고효율 등을 요구하여 최근의 tribology 분야에 사용되는 부품들의 신소재로의 대체를 요구하고 있다. 한 예로 지금의 엔진보다 더 고온에서 작동되는 고효율의 경량의 첨단 열엔진의 개발을 들 수 있다. 이러한 열 엔진의 사용목적을 달성하기 위해서는 기존의 금속재료로는 고온에서 작동괴기에는 너무 약하고 무겁기 때문에 구조용 세라믹스가 고려되고 있는 것이다. 신소재 분야중 세라믹스는 고기능성 부품과 이미 산업화된 분야의 부품의 대체 재료로 주목을 받고 있다.