• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.92-99
• /
• 2005

Numerical analyses of critical speed and mass unbalance response are performed for a 30 ton thrust turbopump. The stiffness and damping of ball bearings and non-contact seals are quantified under aerodynamic and hydrodynamic loads induced by a fuel pump and turbine. Critical speed margin and tip displacements of the rotating parts are evaluated using a three-dimensional finite element method. The results are used to ensure the soundness of the rotordynamic design using an one-dimensional transfer matrix method. A further study shows that sufficient resonance margin may be assured via controlling the stiffness of the rotor support by employing an additional elastic ring to the bearing support.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.2
• /
• pp.83-90
• /
• 2015

Almost of current Automatic Incident Detection(AID) algorithms involve the vulnerability that detects the traffic accident in open road or in tunnel as the traffic jam not as the traffic accident. This paper proposes the improved accident detection algorithm to enhance the detection probability based on accident detection algorithms applied in open roads. The improved accident detection algorithm provides the preliminary judgment of potential accident by detecting the stopped object by Gaussian Mixture Model. Afterwards, it measures the detection area is divided into blocks so that the occupancy rate can be determined for each block. All experimental results of applying the new algorithm on a real incident was detected image without error.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.238-246
• /
• 2012

Organic matters budget in Lake Hoengseong were monthly investigated from April 2009 to November 2009. The intense rainfall occurred at between July and August and the hydrological factors were highly varied during the rainfall season. By the concentrated rainfall, the elevation, influx and efflux were sharply increased and the turbid water was also flowed into the middle water column in Lake. The inflow of turbid water increased the nutrient concentrations in water body and this appears to stimulate of phytoplankton regard as the primary productivity of influx of organic matter. Monthly average concentration of dissolved organic carbon (DOC) was generally higher than the particulate organic carbon (POC) concentration in Lake, but Temporal and spatial variation of POC concentration was higher than DOC and the maximum POC concentration was recorded in surface water in August, had the highest phytoplankton biomass. Organic carbon concentration in inflow site was rarely changed during the dry season, but the concentration was rapidly increased by the initial intense rainfall. In organic matters budget, the most of the organic matters was inflowed from the inflow site at rainfall season. Especially, the influx of allochthonous organic matters during the intense rainfall was 72.4% in the total influx organic matters.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.22-25
• /
• 2009

Development of a curvic-coupling was presented in this paper. The research covers design, structural analysis, hot-temperature-torsion-test, curvic-coupling applied proto-type turbine disk manufacturing, and assembly test of a curvic-coupling rotor system for the turbopump application. Curvic-coupling was designed based on the Gleason-standard-tooth shape. The load capability of the designed curvic coupling was validated by the structural analysis and hot-temperature-torsion-test. A proto-type turbine disk which had adopted designed curvic-coupling was manufactured, assembled and tested to reveal that shaft-disk assembly run-outs in axial and radial directions were much smaller than the design requirements. The development will be finalized after spin test of shaft-disk assembly in near future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.409-412
• /
• 2009

A 75ton thrust turbopump system for liquid rocket engine was analyzed thermally and mechanically. A 2D axisymmetric model of the turbopump assembly was created. In the analysis operation cycle including chill-down, operation and post operation steps were considered. Appropriate heat transfer conditions for each step were modeled and applied. Transient temperature distribution was calculated, consequent mechanical analysis was conducted to predict stress and deformation. Effects of external heat insulators and heat dissipation at the bearings were considered in the heat transfer analysis.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.351-358
• /
• 2002

Recently, personal business styles have been rapidly changed into e-business due to the rapid progress and deployment of Internet. As a result of the change, new and safe ways of payment such as electronic wallet, electronic money and electronic check have been developed and introduced. In this paper a secure and user-friendly payment method is addressed. One of most important reasons why newly developed safe payment methods are not widely used in e-business is lack of convenience for the users. On the other hand credit card based payment, which is traditional one, is the most prevailing due to the user-friendliness. However this payment also has some problem in sense of security. In this paper, we design and implement a secure credit card-based payment system using one-time credit information. The main features are "payment information must be new", "can use the old credit system", and "do not require client software".

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.5
• /
• pp.97-110
• /
• 2018

The purpose of this study is to provide basic data and evidence for the habitat improvement of wild birds in urban stream by analyzing changes in habitat characteristics of wild birds by riparian forest construction in Yangjae stream in Seoul. In Gangnam-gu, the multi layered riparian forest consisting of landscape trees and shrubs was formed on the slope. In Seocho-gu, the vertical vegetation structure of woody and herbaceous wetland plants was good. In Gangnam-gu, the vegetation area of the slope increased and the vertical stratification structure affected the species diversity of the forest birds. The number of species and individuals of plovers, sandpipers and wagtails decreased due to the impact of bicycle roads and trails. The poor forests on the levee slope in Seocho-gu affected the habitat selection and migration of the forest birds. The willows and amur silver-grasses formed in the riverside have been developed into the riparian forest, thus stabilizing the habitat of water birds by blocking disturbances from the influence of the trails.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2S
• /
• pp.733-743
• /
• 2000

This paper describes design and implementation of a content manager in the Integrated Steaming Framework Architecture (ISSA) that is proposed by the authors. The ISSA can provide an environment to develop multimedia streaming applications under heterogeneous distributed systems. The goal of ISSA is to extend the limitations of existing streaming systems. It can support diverse media formats and high level programming environment for streaming application developers. Moreover, it is independent from underlying networks and operating systems, and compatible with the global real-time multimedia database system(BeeHive) so that streaming media is efficiently retrieved, stored, and serviced. The role of a content manager is important in the ISSA environment since it manages an information of media that are provided by the server, and allow users to access media more easily by means of conveying that information to the streaming server, Web server, and client efficiently. The proposed content manager is not only to meed these requirements, but also to provide streaming information to media source and transport manager in order to be an efficient streaming. Furthermore, it supports database transaction processing by using the database connector.

• Journal of Welding and Joining
• /
• v.19 no.3
• /
• pp.285-291
• /
• 2001

Large steel water pipes are joined prevalently by the bell end method, and are welded both at inside and outside of lapped parts. In practice, welded joints of water pipes are very critical, because in most cases failure of pipes causing leakage occurs at the welded joint. Therefore some methods have been developed to ensure the soundness of welded joints of water pipes, like leakage tests and nondestructive tests (NDTs). But one of the major characteristics that affects the soundness of welded Joints is the stress distribution caused by welding and external forces. Some studies have been carried out on the residual stress of steel water popes, but complex stress distributions by welding and external forces are rarely studied. In this study, temperature and stress distributions in steel water pipes produced by welding are predicted by a three-dimensional finite element method(FEM). Also, stress values are measured from real steel water pipes by the hole-drilling methods, and compared with predicted ones. The influence of some typical post weld treatments on residual stress distribution was also investigated by residual stress measurements.

• Journal of Korean Society on Water Environment
• /
• v.29 no.1
• /
• pp.7-18
• /
• 2013

We compared the structure of fish community and condition of major fish species in Lake Chungpyung and Lake Paldang, which are relatively shallow, meso-eutrophic, cascading dam reservoirs on the North Han River. Two lakes have wide littoral zone in the lakeside providing similarly good habitat for fishes, whereas fishery and water recreational activities such as motorboating, water skiing are allowed in Lake Chungpyung but are prohibited in Lake Paldang. The average lengths of large size fishes in Lake Chungpyung are shorter than those of same species in Lake Paldang, resulting in the slight distortion of generation distribution of those species in Lake Chungpyung, possibly owing to the active fishery such as fixed shore net fishing, gill net fishing and angling. Meanwhile the condition of fishes represented by the length-weight relationship of fish species did not show the significant differences between two lakes and showed normal condition. To evaluate the impact of physical disturbance such as loud noise and turbulent wave from water recreational activities to fishes precisely, further studies including physiological responses to stress an spawing activity should be needed.