Browse > Article
http://dx.doi.org/10.5139/JKSAS.2005.33.6.092

Critical Speed Analysis of the Liquid Rocket Turbopump  

Jeon, Seong-Min (한국항공우주연구원 터보펌프그룹)
Kwak, Hyun-Duck (한국항공우주연구원 터보펌프그룹)
Yoon, Suk-Hwan (한국항공우주연구원 터보펌프그룹)
Kim, Jin-Han (한국항공우주연구원 터보펌프그룹)
Publication Information
Journal of the Korean Society for Aeronautical & Space Sciences / v.33, no.6, 2005 , pp. 92-99 More about this Journal
Abstract
Numerical analyses of critical speed and mass unbalance response are performed for a 30 ton thrust turbopump. The stiffness and damping of ball bearings and non-contact seals are quantified under aerodynamic and hydrodynamic loads induced by a fuel pump and turbine. Critical speed margin and tip displacements of the rotating parts are evaluated using a three-dimensional finite element method. The results are used to ensure the soundness of the rotordynamic design using an one-dimensional transfer matrix method. A further study shows that sufficient resonance margin may be assured via controlling the stiffness of the rotor support by employing an additional elastic ring to the bearing support.
Keywords
Turbopump; Critical speed; Unbalance response; Finite Element Method;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Brune, C. and Lassoudiere, F., 'Rotordynamics of the Vulcain $LH_{2}$ Turbopump Comparison between Test Results and Dynamic Analysis Calculations', Proceedings of 3rd International Conference on RotorDynamics, 1990, pp. 353-360
2 전성민, 김진한, 양수석, 이대성, '산화제 터보펌프의 구조강도 및 진동 안전성에 관한 연구', 유체기계저널,제5권 제3호, 2002, pp. 25-32
3 전성민, 김진한, 이대성, '액체로켓 터보펌프 구동터빈의 구조 강도 및 진동 안전성에 관한 연구', 한국항공우주학회지, 제 31권, 제8호, 2003, pp.77-84
4 유재한, 최지훈, 이인, 한재홍, 전성민, 김진한, '액체 로켓 터보펌프 터빈의 천이 열전달 및 구조해석', 한국항공우주학회지, 제 32권, 제3호, 2004, pp. 58-65
5 Kim, J., Lee, E. S., Choi, C. H. and Jeon, S. M., 'Current Status of Turbopump Development in Korea Aerospace Research Institute, 'IAC-04-S.P.17, International Astronautical Congress 2004, Vancouver, Canada, October 2004
6 Childs, D. W., 'The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem', Journal of Engineering for Power, Vol. 100, 1978, pp. 48-57   DOI   ScienceOn
7 곽현덕, 전성민, 김진한, 조광래, 김선용, 우관제, '터보펌프용 극저온 볼 베어링의 성능검증', 한국윤활학회지, 제20권, 제4호, 2004, pp. 177-182
8 Childs, D. W. and Moyer, D. S., 'Vibration Characteristics of the HPOTP (High Pressure Oxygen Turbopump) of the SSME (Space Shuttle Main Engine)', Journal of Engineering for Gas Turbines and Power, Vol. 107, 1985, pp. 152-159   DOI
9 윤석환, 전성민, 김진한, 조광래, '액체로켓 터보펌프에 대한 구조해석 및 안전성 검증', 한국군사과학기술학회 종합학술대회, 2004, pp. 587-589
10 이관호, 윤석환, 전성민, 곽현덕, 김진한, '액체로켓 터보펌프의 구조설계 및 제작검증', 제3회 유체공학학술대회, 2004, pp. 283-286
11 곽현덕, 전성민, 김진한, '국산화 터보펌프용 플로팅 링 실의 누설특성 및 소재검증', 한국군사과학기술학회 종합학술대회, 2004, pp. 583-586
12 이용복, 김창호, 곽현덕, 하태웅, 우유철, '탄성 링을 갖는 볼 베어링 지지의 터보펌프 임계 속도에 관한 연구', 유체기계저널, 제4권, 제2호, 2001, pp. 22-28
13 전성민, 김진한, '30톤급 터보펌프의 회전체 동역학 설계 및 해석', 한국항공우주학회 2003년도 추계학술대회, 2003, pp. 976-979
14 Fredric, F. E., Handbook of Rotordynamics, McGraw-Hill, New York, 1992