• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.325-342
• /
• 1998

Two RADARSAT SAR images with different modes acquired by Canadian Space Agency to test the effectiveness of geological lineament extraction and spring water detection over the Cheju Island. Geological lineaments are poorly developed this basalt dominant volcanic island, but more linear features can be extracted when SAR and TM images are simultaneously analyzed than when TM image alone is used. This results mainly owe to the facts that RADARSAT SAR systems are able to provide data with different frequencies, azimuth, and incidence angles. Distribution of spring water along coast is poorly correlated with geological lineaments or drainage pattern, but those in middle range of mountain region are developed along geological lineaments. Detection of spring water using remotely sensed images are turned out to be very difficult to achieve. Radial shaped sea surface temperature anomaly derived from TM thermal band should be the best candidate for spring water, but the resolution is not high enough. We also investigate the normalized radar cross section (or sigma naught) converted from RADARSAT and ERS-1 SAR data but to discriminate the spring water effectively except where relatively large water mass is observed on land side. Speckle noise and irregularity in physical sea surface condition are the serious obstacles for this application. ERS-1 SAR image acquired in low incidence angle was more useful for geological lineament estimation and water body study than RADARSAT SAR images with high incidence angles. Therefore the selection of incidence angle is critical in geological and spring water applications of SAR images, and low incidence angles less than about 30$^{\circ}$ are recommended to monitor the Cheju volcanic island.

• Geophysics and Geophysical Exploration
• /
• v.26 no.2
• /
• pp.52-61
• /
• 2023

The use of ultra-high-resolution (UHR) seismic surveys to preceisly characterize coastal and shallow structures have increased recently. UHR surveys derive a spatial resolution of 3.125 m using a high-frequency source (80 Hz to 1 kHz). A digital streamer system is an essential module for acquiring high-quality UHR seismic data. Localization studies have focused on reducing purchase costs and decreasing maintenance periods. Basic performance verification and application tests of the developed streamer have been successfully carried out; however, a comparative analysis with the existing benchmark model was not conducted. In this study, we characterized data obtained by using a developed streamer and a benchmark model simultaneously. Tamhae 2 and auxiliary equipment of the Korea Institute of Geoscience and Mineral Resources were used to acquire 2D seismic data, which were analyzed from different perspectives. The data obtained using the developed streamer differed in sensitivity from that obtained using benchmark model by frequency band.However, both type of data had a very high level of similarity in the range corresponding to the central frequency band of the seismic source. However, in the low frequency band below 60 Hz, data obtained using the developed streamer showed a lower signal-to-noise ratio than that obtained using the benchmark model.This lower ratio can hinder the quality in data acquisition using low-frequency sound sources such as cluster air guns. Three causes for this difference were, and streamers developed in future will attempt to reflect on these improvements.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.233-244
• /
• 2012

Goseong bay, located in southeast sea of Korea with an area of 2,100 ha, is a semi-enclosed bay well-known for oyster farming cultured in an extended range of 148 ha. The objective of this study is to provide the fundamental data in order to manage the effective sea area. A total 26 of surface sediment were collected from Goseong bay to evaluate their sedimentary environment and heavy metals. The loss on Ignition (LOI), C/N ratio, acid volatile sulfide (AVS) and heavy metals were analyzed. loss on ignition (LOI) of surface sediment range from 1.00% to 3.03% (average 2.00%). The carbonate content ranges from 0.52% to 4.29% (average 2.37%). C/N ratio of organic matter showed that most part of organic matter comes from neighboring continent. Acid volatile sulfide (AVS) value of surface sediment from 0.02 mg/g to 1.43 mg/g (average 0.24 mg/g). A ten element of surface sediments (Al, As, Cd, Cr, Cu, Hg, Ni, Pb, V, Zn) were calculated by enrichment factor (Ef) and the results show that some areas are highly polluted with respect Cu and Hg. The correlation matrix displays the existence of remarkable levels of correlation with both positive and negative values among different variable pairs. LOI and AVS showed both positive values. LOI and AVS values falls under 2% and 1%. Therefore, Goseong bay showed good in quality of sediment.

• Korean Journal of Agricultural Science
• /
• v.30 no.1
• /
• pp.41-58
• /
• 2003

This study was conducted to investigate bird community and to suggest a proper way how to manage protect bird community in Gap stream. The survey was carried out over four sections by the line transect method and point counts method from September 2001 to August 2002. Natural stream region as Gasuwon Bridge - Mannyeon Bridge are observed birds were 11 orders 29 families 67 species, Artificial stream region as Mannyeon Bridge - Daedeok Bridge are observed birds were 6 orders 10 families 30 species, Daedeok Bridge - Wonchon Bridge are 8 orders 12 families 28 species, Wonchon Bridge - Gap Stream Bridge are 8 orders 18 families 40 species. All the observed birds in artificial stream region are 8 orders 19 families 47 species. Number of species in natural stream region was higher than artificial stream region owe to a various habitat environment such as forest, cultivated land, streamside forest, sandy plain, gravelly field, reedy field etc. and can not add with the interface and the usage of the human. Number of species in artificial stream region was lower than natural stream region owe to a simple habitat environment and the water ecosystem is severed with embankment block and grass plot with the land ecosystem. The furtherance of various habitat environment which considers the ecosystem like the natural stream as the water ecosystem is joined together with the land ecosystem is desired to attract various wildbirds in Gap stream. The design is desired with the maintenance of the stream to consider the stream corridor which plays ecological important role as connect the fragment habitats.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.91-91
• /
• 2011

폴리프로필렌(PP)은 고결정성 범용수지로서 염색성, 내열성, 촉감 등의 문제로 의류용 소재로는 부적합하여 초기에는 카펫용 섬유로서 가염형 폴리프로필렌 섬유가 상업화 되었지만 성공하지는 못하였다. 그 후, 섬유 산업도 의류용 외의 산업자재, 생활 자재 분야 등이 성장함에 따라, 폴리프로필렌 섬유의 수요가 확대되었다. 최근들어 스포츠 액티브 의류가 일반의류 트렌드로 들어오면서 기능성 섬유가 요구되고 이 분위기에 맞춰 다시 한번 폴리프로필렌 섬유의 의류화가 요구되는 시점이 되었으며 섬유중 에너지 소비량이 가장 적고, 쉽게 재용해할 수 있으며 소각시 유해 가스발생량이 매우 적은 특징등이 있기 때문에 지구 환경보호의 입장에서 폴리프로필렌 섬유가 재검토되고 있다. 이번 실험은 분산염료를 이용하여 농도별, 온도별, 시간별, 후처리시 시간과 온도의 변화로 가염 PP/PET 섬유의 염색특성을 알아보기 위해 실험 진행하였다. 실험에 사용되는 시약은 1급으로, $CH_3COOH$, NaOH, $Na_2S_2O_4$이며, 조제는 분산제, 정련제를 사용하였다. 먼저 온도별 실험에서 $40^{\circ}C$에서 승온하여 각각 $100^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$에서 온도에 따라 염색되는 정도를 알아보았다. 가장 높은 흡진을 보이는 온도에서 각각 40min, 50min, 60min, 70min 염색 유지시간 실험을 하여 염색이 안정되는 시간을 측정하였다. 위의 실험 결과 최적의 조건으로 염색농도에 따른 Build up 실험을 진행하였다. 가염 PP/PET 섬유는 일반 Polyester처럼 $120{\sim}130^{\circ}C$에서 가장 높은 염색농도 값(K/S)을 보인다. 또한 $130^{\circ}C$에서의 유지시간에서는 50 min 이상 진행시 더 이상의 흡진이 없거나, 염료의 탈락이 있음을 알수 있다. Build up 실험에서는 8.0%까지 실험하였지만, 결과는 그 이상농도를 사용하여도 염색은 가능함을 알 수 있었다. 후처리에 대한 실험에서 염료에 따라 차이가 있지만 크게 영향을 받지 않는 것으로 보이며, 제품성 평가 결과를 보면 후처리를 했을 경우 견뢰도가 우수한 것을 알 수 있었다.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.529-540
• /
• 2003

Recently, the researches on the durability design of concrete structures have been studied. As the examples, models to evaluate the service life prediction of the structure have been developed. The purpose of this article is to develop the model for predicting remaining service life. The final aim is to provide the user time for repairing the concrete structures. In addition, it makes possible to maintain the concrete structure economically. 70 reservoirs out of the inland concrete structures were selected and concrete structures of their components were surveyed. Two methods were used for measuring carbonation; TG/DTA method and Phenolphtalein indicator and, the value of pH was measured by the pH meter, After deriving correlations of calcium carbonate and used year, duration from completion year to 2002, pH value, and concrete cover depth the model was developed for predicting remaining service life by measuring data as small as possible. The conventional models had been developed on the basis of experiment data obtained from the restricted lab environment like as carbon gas exposure. On the other hand this model was developed on the basis of measuring data obtained from the real field that the complex deterioration actions are occurred such as freezing and thawing, carbonation, steel corrosion, and so on. The reliability of the developed model will be evaluated high in this point and this model can help to maintain concrete structures economically by providing the manager time to repair the deteriorated concrete structures in site of facility management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.113-128
• /
• 1990

In recent years, various types of coastal protection scheme have been studied around the coastal region. Among them, so-called zonal protection systems are being watched with interest from various points of view. In this paper, wave overtopping rate from overflowing the vertical seawall is investigated by conducting two dimensional model on the horizontal bed experiment. Hereafter this system is referred to as a artificial reef system. One is the foundation to control wave height near the surfzone and the other is function to prevent coastal disaster by suppressing net overtopping rate. The main results obtained in this study are summarized as follows. 1) Wave attenuation taken place on the artificial reef can be predicted numerically by using energy dispersion model due to wave breaking proposed by Battjes. 2) To evaluate the wave overtopping rate from a vertical seadike on various coastal constructions by weir model, a numerical procedure for prediction of overtopping is confirmed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2016

The Korea Meteorological Administration has operated the Automatic Weather Stations, of the average 13 km horizontal resolution, to observe rainfall. However, an additional RADAR network also has been operated in all-weather conditions, because AWS network could not observed rainfall over the sea. In general, the rain rate is obtained by estimating the relationship between the radar reflectivity (Z) and the rainfall (R). But this empirical relationship needs to be optimized on the rainfall over the Korean peninsula. This study was carried out to optimize the Z-R relationship in the summer of 2014 using a parallel Micro Genetic Algorithm. The optimized Z-R relationship, $Z=120R^{1.56}$, using a micro genetic algorithm was different from the various Z-R relationships that have been previously used. However, the landscape of the fitness function found in this study looked like a flat plateau. So there was a limit to the fine estimation including the complex development and decay processes of precipitation between the ground and an altitude of 1.5km.

• Korean journal of food and cookery science
• /
• v.28 no.3
• /
• pp.327-335
• /
• 2012

This study was reviewed the changes in main ingredients, seasonings and cooking methods of Tangpyeongchae in Korean cook books and literatures published from the 1700s to the 1960s. The first published books about Tangpyeongchae were in Kosasibijib and Kyongdojabji, written in 1783 and the late 1700s, respectively. Tangpyeongchae, a representative traditional Korean dish that was royal cuisine offered at ritual events in the Chosun Dynasty, was called Cheongpochae in the royal court. It was a dish made by mixing cheongpomuk (mung bean gel), meat, dropwort, mung bean sprout, egg strips and laver. This dish has been seasoned with vinegar, soy sauce, black pepper, garlic, green onion, red pepper, salt, sugar, sesame oil and sesame salt since the early 1900s. Dropwort, egg strips, laver, pine nut (powder), red pepper powder, and red pepper threads were used as garnishes. Tangpyeongchae was made by mixing cheongpomuk with other ingredients and seasonings until the late 1800s. Since the early 1900s Tangpyeongchae has been seasoned first with other ingredients and then mixed cheongpomuk.