• Bulletin of Food Technology
• /
• v.21 no.2
• /
• pp.49-54
• /
• 2008

농산물 중 잔류농약을 보다 쉽고 효율적으로 분석 할 수 있는 다성분 동시분석 방법에 따라서 UPLC-PDA을 이용하여 기기조건에 따른 검출한계 및 정량한계를 식품별 최저 MRL과 비교하여 유효성을 알아보고 회수율을 통하여 방법의 재현성을 조사한 결과 다음과 같다. 41종의 농약에 대한 검량선은 직선성이 우수하였으며 검출한계 $0.005{\sim}0.109mg/kg$으로 나타났으며 정량한계 는 $0.018{\sim}0.363ppm$으로 나타났다. Cycloprothrin 등의 경우처럼 검출기의 감응도가 최저 MRL 기준을 초과하는 농약에 대한 보완으로는 검출감도가보다 우수한 UV 검출기 등의 병행 활용이 필요하다. 회수율에 따른 재현성은 쌀의 경우 첨가 농도 0.4 mg/kg 일때 $62.09{\sim}99.58%$로 편차범위는 $1.03{\sim}13.92%$ 얻을 수 있었다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.3
• /
• pp.226-232
• /
• 1988

Non-enzymatic browning is a carbohydrate dehydration reaction, accelerated thorough the interaction of amino compounds. Reaction depends on several factors including temperature, reactant concentration, pH, water activity and specific ion concentrations, and result in progressive development of brown pigments in the affected food systems. The present study was designed to utilize a kinetic approach to analyze the effect of temperature and water activity on the browning development in green ten. The green tea was controlled at aw of 0.33, 0.44, 0.52 and 0.65 using saturated salt solutions and then stored at 35,45 and $55^{\circ}C$. Author portion of the sample of which the water activities were controlled in the same manner was stored at 35 and $55^{\circ}C$ alternately with 7 days interval. Simplified kinetic models were used to obtain the various kinetic parameters for browning development in green tea subjected to accelerated shelf-life tests(ASLT). The reaction of browning development was zero order. The activation energies calculated from Arrhenius plot ranged $1.5{\sim}2.4kcal/mole$ and $Q_{10}$ values were between 1.07 and 1.12. These kinetic parameters were then used to predict browning development under the nonsteady storage. Assessed from the parameters the shelf-lives at $25^{\circ}C$, the time to reach 1.02 O.D./g solid at which severe brown color change could be detectable, ranged 57 to 113 days and showed decrease with increase in aw. The predicted shelf-lives at different water activities were a little higher than actual values.

• Korean journal of applied entomology
• /
• v.39 no.1
• /
• pp.21-24
• /
• 2000

These studies were conducted to investigate the effect of temperature on the developmentof Delia platura (Meigen) under a laboratory condition at five different temperatures. The developmentalperiods of D. platurcr from egg to adult emcrgence at the temperatures of 11, 15, 19, 23, and 27$^{\circ}$C were67.8k 14.5, 43.7t-9.4, 31.2-t-7.0, 22.4k4.9, and 18.3k4.1 days, respectively. Based on these results,threshold temperature of development and effective cumulative degree-day (DD) for overall developmentwas 0.6"C and 579.8 DD, respectively. Generation of time D. pluturci averaged 30.8 days, and meannumber of eggs produced per female was 246.5 k 16.9 at 23$^{\circ}$C. Hatching rate and emergence rate curvesin relation to the temperature was dome shaped with the peak of 90.0 and 85.2% at 23"C, it wassuggesting that hatching and emergence were inhibited by high temperature above that temperature.Pupation rate of the insect reared on garlic and on onion were higher than those reared on other diets.Oviposition of D. platum usually began 7-9 days after emergence at 23$^{\circ}$C. Females laid about 3-4 eggsin a day. Oviposition of the females peaked at the age of 12- 18 days after emergence. of 12- 18 days after emergence.

• Korean Business Review
• /
• v.14
• /
• pp.31-44
• /
• 2001

The purpose of auditing is to express an auditor's opinion on the fair presentation of the financial position and business operations of companies according to the financial accounting standards, and to raise the reliability of the financial statements and to enable the user of the financial statements to make a proper judgement on the companies. There should be an audit risk in the audit of the financial statements in a modem sense because it is done by the sampling audit not by the detailed one. Audit risk is the risk that an auditor may unknowingly fail to modify appropriately the auditors' report on financial statements containing a material misstatement. The audit risk eventually hurt the reliability of the financial statements when the auditors set up different audit risks because it is determined by the auditor's professional judgement. Thus, there have been negative opinions on the Audit Risk Model suggested in the SAS No. 47 because it cannot explain the process of auditor's judgement and bring different results. In view of the results so far achieved, which influences the auditor's decision making, should be done by the Belief Function Mode Model in a position of raising the reliability of the financial statements and emphasizing the usefulness and effectiveness of the auditing.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.77-86
• /
• 2011

The concrete creep deformation of a hybrid composite section can cause additional deformation of the composite section and the stress relaxation of pre-compressive stress on the concrete section due to partial restraint of the deformation. In this study, the stress relaxation coefficient method (SRCM) is derived for simple analysis of complicate hybrid or composite sections for engineering purpose. Also, an equation of the stress relaxation coefficient (SRC) required for the SRCM is proposed. The SRCM is derived with the parameters of a creep coefficient, section and loading properties using the same method as the constant-creep step-by-step method (CC-SSM). The errors of the SRCM is improved by using the proposed SRC equation than the average SRC's which were estimated from the CC-SSM. The root mean square error (RMSE) of the SRCM with the proposed SRC equation for concrete with creep coefficient less than 3 was less than 1.2% to the creep deformation at the free condition and was 3.3% for the 99% reliability. The proposed SRC equation reflects the internal restraint of composite sections, and the effective modulus of elasticity computed with the proposed SRC can be used effectively to estimate the rigidity of a composite section in a numerical analysis which can be applied in analysis of the external restrain effect of boundary conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.256-260
• /
• 2008

In this study, the composition of saponin and physico-chemical properties of Korean red ginseng extract was analyzed based on various extracting conditions. The total saponin and individual ginsenoside concentration of the red ginseng extract showed a decreasing trend as the extracting temperature and time increased; also, the extracting condition at $75^{\circ}C$ for 24 hours showed the highest concentration. In contrast, the concentration of $Rg_3$ increased as the extracting temperature and time increased within the particular range. It was suggested that a certain part of ginsenosides changes to $Rg_3$ according to extracting conditions; thus, the concentration of $Rg_3$ increased. Physico-chemical properties of Korean red ginseng extract based on the extracting conditions were different compared to those for saponin; so, as the extracting temperature and time increased, brix and color difference increased but pH decreased indicating stabilization of the overall quality of the product. Therefore, the most appropriate extracting condition for both the product quality of Korean red ginseng extract and stable extraction of saponin was $80^{\circ}C$ within 48 hours, minimizing the loss of ginsenosides.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1788-1795
• /
• 2017

In this paper, we proposed a service that provides CPA/TCPA information to ships, without ARPA/ATA devices to support decision making of the navigator for maritime safety based on various services at shore and off-shore. To verify the proposed service, we use SiNAS (scenario-based simulator for NAS) with CPA/TCPA information providing software to evaluate its usability, because executing the test in real ship has many limitations and difficulties. To do this, we specify two simulation scenarios for the required purpose, and we liaise twelve participants with various navigation experience to conduct the simulations. Also, we analyze the results of simulation using mission success or not, the minimum approaching distance with the target ship, the time of a recognition the target ship, the time of a first action for collision avoidance with the target ship, and so on. Then, we evaluate usability of the proposed service based on the three elements which are effectiveness, efficiency and satisfaction.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.793-802
• /
• 2008

The development methods which utilize OSSs have been tried as new alternative to solve limits of the previous software developments such as the quality of software, and time and cost of developments. Especially, small and medium companies are suffering from difficulty in applying large-scale development methodology whenever they develop softwares. Therefore, in the current situation that demand for small-scale development methodology is increasing, the methods of utilizing OSSs can become an efficient way to save costs and reduce a development period. Accordingly, analysis of open-source is no fixed procedure or method to utilize open-source for software developments in the field. In this thesis, to solve such problems, we propose the procedures and methods for identifying and selecting suitable open-source, and effective methods for improvement and integration through least modification on the basis of synthesis of existing researches and experiences in development projects. For selection of OSSs, we did identify correct requirements for the software to be developed, investigate the open-source just matching with such requirements, draw a candidate index, establish assessment criteria, and the consequently present a method to select OSSs. And, we deduced the validity and improvement of each detailed activity from practical application to an actual project and assessment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.298-306
• /
• 2014

The railway signalling system for safe train operation regulates the train speed to ensure the safety distance between consecutive trains by using wayside facilities such as track circuits and interlocking systems. In addition, this signalling system controls the trackside equipment such as a railway point along the train line. This ground-equipment-based train control systems require high CAPEX and OPEX. To deal with these problems, the train control system using the on-board controller has been recently proposed and its related technologies have been widely studied. The on-board-controller-based train control system is that the on-board controller can directly control the trackside equipment on the train line. In addition, if this system is used, the wayside facilities can be simplified, and as a result, the efficient and cost-effective train control system can be realized. To this end, we have developed the prototypes of the on-board controller and wayside object control units which control the point and crossing gate and performed the integrated operation simulation in a testbed. In this paper, before the field test of the on-board-controller-based train control system, we perform the preliminary field trial including the installation test, wireless access test, interface test with other on-board devices, and normal operation test.

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.366-374
• /
• 2004

The purpose of this study is to develop effective destination management strategies for three typical tourist destinations in Kangwon province based on the importance-performance analysis. The results show that overall performance levels of 21 management attributes in three destinations is relatively low, compared to the importance levels of the attributes. 6 attributes place in Concentrate Here, 4 attributes in Possible Overkill, 6 attributes in Keep Up Good Work, and 5 attributes in Low Priority. There is no significant difference in the importance level among three destinations, while performance levels are the lowest at Naksan & Kyungpo beaches, and highest at Ganhyun area. Findings of the survey expect to be used as fundamentals in management policy making process for each destinations.