• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.698-703
• /
• 1996

To elucidate the proper nitrogen application method for machine transplanting of rice infant seedling in no-tilled paddy, Dongjinbyeo was used and nitrogen was applied five methods including conventional application method. Leaf color was darker at 80% of total nitrogen was applied as basal and lighter at 20% of total nitrogen was reduced than conventional application method in tillering stage, but wasn't significantly different after panicle formation stage among the application method. And it was thinner at tillering stage and was darker after panicle formation stage in no-tilled paddy compared with tilled paddy. Tiller number, LAI and top dry weight were more at 80% of total nitrogen was ap-plied as basal than conventional application method, and more in tilled paddy than no-tilled one at tillering stage, but at heading stage they were highest at top dressing applied 25 days after transplanting. C.G.R was highest at top dressing for tillering was delayed and it was lower in no-tilled paddy at tillering stage but was higher after panicle formation stage than in tilled one. Yield was highest at top dressing time was delayed among nitrogen application method, but wasn't significantly different between tilled method in same nitrogen application method.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.523-534
• /
• 2011

In this study, the particle size distribution and pollutants content of sediments collected from different sites in the coastal area of Chungnam province were analyzed. The sediment samples were collected from different parking lots near beaches, harbors, museum and bridges. The particle size distribution analysis showed that the particle is generally $106-500{\mu}m$ and the effective size $D_{10}$ ranges from 40 to $60{\mu}m$ while the $D_{50}$ and $D_{60}$ ranges from 200 to $810{\mu}m$ and 235 to $1005{\mu}m$, respectively. For particle size $D_{10}$, there was no significant difference in all sites. However, for $D_{50}$ and $D_{60}$, the range is large. Sediment analysis implicates that as the particle size decreases, the pollutant content increases. This is because smaller particles have higher specific surface area resulting to have more adsorption capacity. Particles from tires, emission gas from vehicles and dust particles belongs to smaller particles. For particle sizes less than $63{\mu}m$, the analysis showed that as the particles become coarser, the concentration of VS, $COD_{cr}$, TN, and TP is at least 2 to 14 times higher. Cu and Pb were detected in all sites and shows a higher concentration with smaller particle size. Cu concentration are almost the same for all sites but in the case of Pb, the sediments from Sinjindo has higher concentration of up to 2 to 3 times as compared to those collected from the other sites. In the Beach site as well as in the Seocheon Ocean Museum, Cd was contained only in fine particles. However, in Daechon Harbor and Sinjindo Bridge sites, Cd was detected in all the sediment particle size.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1131-1141
• /
• 2012

In this study, factors that influence water supply capacities of dams are extracted using factor analysis, and multiple regression equations for estimating water supply capacities of dams are developed using the analysis results. Twenty-one multi-purpose dams and twelve Municipal and Industrial (M&I) water supply dams are selected for case studies, and eight variables influencing water supply capacities of dams, namely: watershed area, inflow, effective reservoir storage, grade on amount of M&I water supply, grade on amount of agricultural water supply, grade on amount of in-stream flow supply, grade on river administration, and grade on average rainfall, are determined. Two case studies for multi-purpose dams and M&I water supply dams are performed, employing factor analysis, respectively. For the two cases, preliminary tests, such as reviewing matrix of correlation coefficient, Bartlett's test of sphericity, and Kaiser-Meyer-Olkin (KMO) test, are conducted to evaluate the suitability of the variables for factor analysis. In case of multi-purpose dams, variables are grouped into three factors; M&I water supply dams, two factors. The factors are rotated using Varimax method, and then factor loading of each variable is computed. The results show that the variables influencing water supply capacities of dams are reasonably selected and appropriately grouped into factors. In addition, multiple regression equations for predicting the amounts of annual water supply of dams are established using the factor scores as explanatory variables, it is identified that the models' accuracies are high, and their applications to determining effective storage capacity of a dam during dam planning and design steps are presented. Consequently, it is thought that the variables and factors are useful for dam planning and dam design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.14-21
• /
• 2011

A 10b 500MS/s $0.13{\mu}m$ CMOS ADC is proposed for 4G wireless communication systems such as a LTE-Advanced and SDR The ADC employs a calibration-free single-channel folding architecture for low power consumption and high speed conversion rate. In order to overcome the disadvantage of high folding rate, at the fine 7b ADC, a cascaded folding-interpolating technique is proposed. Further, a folding amplifier with the folded cascode output stage is also discussed in the block of folding bus, to improve the bandwidth limitation and voltage gain by parasitic capacitances. The chip has been fabricated with $0.13{\mu}m$ 1P6M CMOS technology, the effective chip area is $1.5mm^2$. The measured results of INL and DNL are within 2.95LSB and l.24LSB at 10b resolution, respectively. The SNDR is 54.8dB and SFDR is 63.4dBc when the input frequency is 9.27MHz at sampling frequency of 500MHz. The ADC consumes 150mW($300{\mu}W/MS/s$) including peripheral circuits at 500MS/s and 1.2V(1.5V) power supply.

• Membrane Journal
• /
• v.21 no.2
• /
• pp.177-192
• /
• 2011

Hollow fiber membrane using CTA polymers were prepared by the phase separation method for the separation and purification of biogas and the hollow fiber gas separation membrane modules with the effective surface area of 0.17 $m^2$ were prepared. The pure gas permeation properties of membrane modules for methane, oxygen and carbon dioxide were measured. The permeance of $CO_2$ and $CH_4$were 0.46 GPU and 18.52 GPU, respectively, therefore, the high $CO_2$/$CH_4$ selectivity of 40.4 was obtained. The separation and purification test for 4 different simulated mixed gases were carried out after the pure gas test and the gas concentration and flux of the permeate at the various stage-cut were measured from the 1 stage, 2 stage, and 3 stage cascade of membrane modules. In the 1 stage test, the concentration of $CH_4$ increased as the increase of the stage-cut, while the $CH_4$ recovery efficiency ratio decreased. In the 2 stage test, the $CH_4$ recovery efficiency ratio increased compared to the 1 stage. The 3 stage test was employed to reduce the loss of $CH_4$ in biogas and the result showed less than 5% of $CH_4$ recovery loss.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.261-265
• /
• 2003

Cold air accumulation plays a critical role in formulating daily minimum temperature in complex terrain on radiative cooling nights, and spatial interpolation can be improved by accommodating this important topoclimatic variable. Little is known about the spatial scale for computing cold air accumulation which influences daily minimum temperature. Air temperature was measured at 10-minute intervals during September 2002- February 2003 at eight locations within a 1 by 1 km hilly orchard area. Minimum temperature data for suspected radiative cooling nights were collected, and the deviations from reference observations at a near-by KMA automated weather station were calculated. A digital elevation model with a 10m cell size was used to calculate the cold air accumulation at 8 locations. Zonal averages of the cold air accumulation were computed for each location by increasing the cell radius from 1 to 10. Temperature deviations were regressed to a common logarithm of the smoothed averages of cold air accumulation to derive a linear relationship between the local temperature deviation and the site topography. The highest coefficient of determination ($r^2$ = 0.78) was found at a cell radius of 5, which corresponds to an approximately 1 ha boundary surrounding the point of interest.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.282-289
• /
• 2017

The flexural behavior tests of UHPC segmental Box girder which has 160MPa compressive strength and 15.4m length were carried out. The test variables are area of prestressing wires, volume fraction of steel fibers and longitudinal reinforcing bars in upper flange and web. PS tendons which has 32 strands of 15.2mm diameter in lower flange, 24 strands and 14 strands in lower flange were arranged and volume fraction of 2%, 1.5% and 1.0% is used in box girder concrete. UHPFRC box girder which has 32 strands in lower flange showed the over reinforcement and brittle behavior. UHPFRC box girder which has 24 strands showed the similar peak load as 32 strands girder and ductile behavior as large deflection. UHPFRC box girder which has 14 strands showed half of the peak load of 24 strands box girder and ductile behavior. After the application of the formular for the reinforcement index to the behavior of the UHPFRC box girders, reinforcement index does not determine the characteristic of behavior of UHPFRC box girder exactly. So the index should consider the dimension precisely and modify the reference value corresponding to the 0.005 strain of the prestressing strands.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.10
• /
• pp.867-875
• /
• 2018

Conventional nylon wire cutting-type holding and release mechanisms (HRMs) are limited to securely hold the solar panel under launch environment as the size of the panel increases because the nylon wire is tightened directly on the surface of the solar panel. In this study, we proposed a nylon wire cutting-type HRM for 6U CubeSat's solar panel applying elliptic-shaped bracket with a Ball & Socket interface. The proposed HRM has the advantage of higher holding capability along in-plane and out-of plane directions of solar panel and simplicity in tightening process of nylon wire. The design drivers of structural design of CubeSat's solar panel with the proposed HRM were defined by structural analysis under launch loads. In addition, The design effectiveness of the proposed HRM was verified through the functional tests according to the thickness of nylon wire and the number of wire winding under various temperature conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.188-199
• /
• 1996

The native ecological environment and aromatic constituents of Korean wild Codonopsis lanceolata and one Japanese strain were investigated to find Codonopsis lanceolata strains showing high aromatics, and to know regional differences among these strains. The results were as follows : There were no remarkable differences among the Korean wild C. lanceolata strains in ecological environments. Recovery yield of essential oils was highest in Togyusan strain with 0.009%. Difference in protein band patterns among these strains was not recognized, and peroxidase and esterase pattern changes were appeared in different collected regions at the leaf and root tissues. Major aromatic constituents were 11 kinds of aliphatic alcohols such as trans-2-hexenal, 1-hexanol, cis-3-hexanol, and trans-2-hexanol. And Togyusan strain, Sobaeksan strain, and Kayasan strain have the highest aliphatic alcohols of plant essential oils. In particular, BHT(butylated hydroxytoluene), one of the antioxidants, was detected in Chirisan strains.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.383-396
• /
• 1992

In order to find out the reasons for the excessive accumulation of certain fertilizer elements in arable land in Korea, which may be a detrimental factor for her sustainable agriculture in the future, total requirement of fertilizers were estimated from the huge number of soil test data obtained throughout the country using the fertilizer requirement models based on the soil analysis data and the concepts of multi nutrient factor balance or starter fertiliazer. The total fertilizer requirements estimated based on the present soil fertility status were much less than those estimated from the suspected cropping area of various crops cultivated depending on the conventional fertilizer recommendation for each crops or the actual amount of fertilizer elements consumed through National Agricultural Cooporative Federation(NACF). The excessive accumulation of certain fertilizer elements in arable land in Korea must be due to excessively high dose of chemical fertilizers as well as those farm wastes such as animal wasts produced unexpectedly in large amounts or crop residues. And it is suggested that the improved fertilizer recommendation must be developed in consideration both with the soil fertility status and the amounts of nutrient removal by each crop, and that the high analyzed complex fertilizers commonly used by farmers must ugently be developed in a form containing low P and K with Mg and slow release type N for the better balanced management practices of soil fertility by farmers arid for their practices of sustainable agriculture.