• Korean Journal of Plant Taxonomy
• /
• v.40 no.3
• /
• pp.135-144
• /
• 2010

This study intended to investigate environmental factors including soil and vegetation in order to understand the environmental and ecological characteristics of four different habitats of Abelia tyaihyoni. These habitats, according to investigations, are mostly located at elevations of 203 m to 297 m with angles of inclination ranging from 9 degrees to 17 degrees. The litter depth of habitats is 2 cm to 5 cm. A total of 113 vascular plant taxa are identified in seven quadrates of the four habitats. The life form of 113 species is H-$D_4$-$R_5$-e type. The importance value of Abelia tyaihyoni is 39.61%, and 4 highly ranked species such as Quercus dentata (6.27%), Spiraea blumei, Spiraea prunifolia for. simpliciflora (4.04%) and Ulmus davidiana var. japonica (3.84%) are considered to be an affinity with Abelia tyaihyoni in their habitats. The dominant species of woody plants in the four habitats are represented as Pinus densiflora (21.22%) and Quercus dentata (16.82%) in the subtree layer (T2), and Carex humilis var. nana (18.95%) and Carex lanceolata (17.63%) in the herbaceous layer (H). The degree of their average species diversity is 1.42, and that of dominance and evenness are 0.07 and 0.86, respectively. The type of soil is sandy loam, clay loam and loam, and the average field capacity of soil is 22.49%. Their average organic matter is 9.39%, soil pH 6.75, and available phosphorus is $1.23 {\mu}g/g$.

• Journal of Korea Water Resources Association
• /
• v.51 no.9
• /
• pp.795-802
• /
• 2018

This study investigates the hydraulic characteristics and the delta development processes in the improved-pneumatic-movable weir by considering the standing angle of the weir through laboratory experiments. The delta migration speed decreases rapidly with time. As the ratio of delta height to water depth increases, the dimensionless delta migration speed decreases at the delta point. Therefore, the water depth decreases as the delta height increases. Although the delta volume is large due to the effective height of the delta, the delta migration speed and sediment deposition decreases because of the backwater effect on the delta. On the same bed slope condition, the larger the weir height, the larger the delta volume and the ratio of delta height to delta front length is close to 1.0. The delta development could be suppressed when the weir is high. Therefore, the condition that the weir is high has the suppressing effect on the delta developments.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.517-522
• /
• 2012

This study was conducted to investigate the morphological and anatomical characteristics of needle and the genetic diversity of Pinus pumila Regel which is a unique and the southern peripheral population in South Korea. ANOVA test showed that there were significant differences among individuals within population in all 8 needle characteristics. Average characteristics of 66 individuals were 53.59 mm in needle length, 0.78 mm in needle width, 68.98 in needle index, 0.65 mm in needle thickness, 4.56 ea. in maximum stomata row, 3.80 ea. in minimum stomata row, 8.36 ea. in total stomata row and 1.71 ea. in resin canals, respectively. Resin canal per needle of this species ranged from one to three, depending on external type. Especially, arrangement types were 69.47% in two resin canals and 30.45% in a single resin canal. A total of 78 bands was generated from 9 selected I-SSR primers. The estimates of genetic variation were 61.5% in proportion of polymorphic bands (P), 1.698 in effective number of alleles ($A_e$), 0.388 in expected heterozygosity ($H_e$) and 0.567 in Shannon's information index (S.I.), respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.44-44
• /
• 1999

저진공(1 kPa~ 100 kPa)은 대기압 측정, 비행고도, 기체의 온도 측정, 질량의 부력 보정, 레이저의 굴절률 측정등에 사용되는 영역으로 과학적 중요성을 갖고 있다. 또한 대기압 이상의 압력 측정과 고진공 측정의 경계적 역할도 수행하고 있어 압력 표준기의 국제 비교에 필수적으로 권장되는 역역이다. 이 영역에 주로 사용되는 압력 표준기는 수은 압력계(Mercury manometer)와 분동식 압력계(Deadweight piston gauge or Pressure)가 있다. 이들은 이동이 불편하거나 불가능하므로 표준기의 국제 비교에 사용되는 전달 표준기로는 보다 이동이 간편한 탄성 압력계인 CDG(Capacitance diaphragm Gauge)가 있다. 이 게이지는 반도체 산업의 공정 제어용으로도 많이 사용되고 있다. 그러나 게이지와 함께 사용되는 컨트롤러의 부피가 크고 무거우며 영점 이동이 커서 측정때 마다 재조정하여야 하는 단점이 있다. 본 논문에서는 이 같은 단점을 극복하기 위해 수정빔 진동형 진공 센서를 잔달 표준기로 사용하는 것에 대한 연구를 수행하였다. 수정빔 진동형 압력 센서는 수정빔으 공진주파수가 스트레인에 비례하는 것을 이용하여 제작된 센서로 주로 대기압 이상의 고압 측정에 많이 사용되고 있다. 먼저 수정빔의 압력과 주파수간의 관계를 측정하고 또한 내장된 수정 온도센서의 공진 주파수를 측정하여 온도 보상을 위한 자료로 사용하였다. 규격에 나와 있는 수정빔의 기하학적 형상으로부터 거동에 관한 이론 모델식을 구하고 압력교정 자료로부터 얻어진 데이터를 이 식과 비교 분석하여 적합한 특성식과 인자를 구하였으며 게이지의 불확도를 추정하였다.모델은 길이가 유한한 0-차원 실린더 모델로 가정하였고, 이에 대한 기하학적 성질 및 열역학적 성질은 유효계수를 고려하여 산출하였다. 진공용기 이중 벽 내부로 흐르는 질소가스의 유량과 온도의 계산은 진공용기 내벽과 외벽을 각각 독립적인 열전달 요소로 가정하여 구성한 모델을 이용하였다. 전체 해석에서 각 열전달 요소의 비열 값은 온도에 따라 변화하는 비열의 특성을 반영하였으며. 진공용기와 플라즈마 대향 부품의 방사율(emissivity)은 앞서 가정했던 각 온도 상승 곡선에 대해서 각각 0.1, 0.2, 1.3의 경우를 가정하여 계산하였다. 직선적으로 증가하는 온도 상승 곡선중 2$0^{\circ}C$/hr의 온도상승율을 갖는 경우가 다른 베이킹 시나리오 모델에 비해 효과적이라 생각되며 초대 필요 공급열량은 200kW 정도로 산출되었다. 실질적인 수치를 얻기 위해 보다 고차원 모델로의 해석이 필요하리라 생각된다. 끝으로 장기적인 관점에서 KSTAR 장치의 베이킹 계획도 살펴본다.습파라미터와 더불어, 본 연구에서 새롭게 제시된 주기분할층의 파라미터들이 모형의 학습성과를 높이기 위해 함께 고려된다. 한편, 이러한 학습과정에서 추가적으로 고려해야 할 파라미터 갯수가 증가함에 따라서, 본 모델의 학습성과가 local minimum에 빠지는 문제점이 발생될 수 있다. 즉, 웨이블릿분석과 인공신경망모형을 모두 전역적으로 최적화시켜야 하는 문제가 발생한다. 본 연구에서는 이 문제를 해결하기 위해서, 최근 local minimum의 가능성을 최소화하여 전역적인 학습성과를 높여 주는 인공지능기법으로서 유전자알고리즘기법을 본 연구이 통합모델에 반영하였다. 이에 대한 실

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.959-967
• /
• 2008

The body measurement ratios and indices used in this study are all 3D female measurement data of the two countries were obtained from Size Korea Project and SizeUSA Project. The purpose of the study is to compare and analyze body measurement data between two countries. The results of this research are helpful for the clothing manufacturer and company to trade with America. The samples were 1,988 Korean and 6,306 American females. Thirty-five body measurement ratios and indices were chosen as the principal measurements in making garments. The conclusion of this research was as follow; First, U.S. females have measurements that exceed Korean women, except for crotch length total and shoulder slope. Second, the correlation coefficients of height and weight are relatively higher than other measurements in the two countries' body measurements. Finally, American women's height ratios are significantly bigger than Korean women's in most height ratios. On the other hand, Korean are significantly bigger than American in weight ratios. The drop values of Korean females are also smaller than those of American. It was recognized that American women are much bigger, wider and more obese than Korean according to the results by utilizing the girth ratios. BMI, Rohrer and Vervaeck index.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.228-228
• /
• 2007

전력선 통신용 비접촉식 커플러는 고속형(2~30 MHz)과 저속형(100~450KHz)으로 나누어 볼 수 있는데, 고속형은 현재 국내에서 독자적으로 개발되어 다양한 모델이 적용되고 있는 상황이지만, 저속형은 시작품수준으로 제조되어 있으나 신호전송 특성의 향상절구가 필요한 상황이다. 전력선 통신용 커플러는 전력선 또는 모뎀으로 통신신호를 전달하는 기능을 하는 것으로서, 전력선 통신을 위한 핵심부품이다. 따라서 본 연구에서는 100~450 KHz 대역에서 사용 가능한 저속형 비접촉식 커플러를 제조하기 위해, 권선조건, 대전류형 자심재료의 모의 해석, 노이즈 필터조건, 임피던스 매칭, 하우징방법 등의 각 공정 변수를 확립하고자 하였다. 자심재료의 모의해석에서 자심재료의 높이와 전력선 도체 단면적 변화는 자심재료의 전류포화특성에 영향을 미치지 않으며, 유효길이와 에어-갭 크기가 증가할수록 전류포화특성은 향상되는데, 자심재료의 내경이 64 mm일 때 자심재료의 폭((외경-내경)/2)은 15 mm 이상이어야 하고, 에어-갭은 약 $600\;{\mu}m$ 정도의 에어-갭을 형성시켜야함을 확인할 수 있었다. 또한 저속용 비접촉식 커플러 제조조건 실험에서 내경${\times}$외경${\times}$높이가 $64{\times}94{\times}140mm$인 자심재료를 이용하여 권선 수와 에어-갭을 각각 3회, $400{\sim}600\;{\mu}m$ 삽입했을 때, 가장 우수한 특성을 나타내었다. 그리고 저역 통과 필터를 출력부에 내장하여 통신신호 이외의 노이즈를 제거할 수 있었다. 본 연구에서 제조된 300 A급 지중선용 저속형 비접촉식 커플러는 내경${\times}$외경${\times}$높이가 $58{\times}1144{\times}158mm$이고, 100~450 KHz 통신대역에서 약$7{\pm}2dB$의 삽입손실을 나타내었다.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.839-852
• /
• 2018

The purpose of this study is to predict monthly agricultural reservoir storage by developing weather data-based Multiple Linear Regression Model (MLRM) with precipitation, maximum temperature, minimum temperature, average temperature, and average wind speed. Using Naïve-Bayes classification, total 1,559 nationwide reservoirs were classified into 30 clusters based on geomorphological specification (effective storage volume, irrigation area, watershed area, latitude, longitude and frequency of drought). For each cluster, the monthly MLRM was derived using 13 years (2002~2014) meteorological data by KMA (Korea Meteorological Administration) and reservoir storage rate data by KRC (Korea Rural Community). The MLRM for reservoir storage rate showed the determination coefficient ($R^2$) of 0.76, Nash-Sutcliffe efficiency (NSE) of 0.73, and root mean square error (RMSE) of 8.33% respectively. The MLRM was evaluated for 2 years (2015~2016) using 3 months weather forecast data of GloSea5 (GS5) by KMA. The Reservoir Drought Index (RDI) that was represented by present and normal year reservoir storage rate showed that the ROC (Receiver Operating Characteristics) average hit rate was 0.80 using observed data and 0.73 using GS5 data in the MLRM. Using the results of this study, future reservoir storage rates can be predicted and used as decision-making data on stable future agricultural water supply.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.1
• /
• pp.3-9
• /
• 1994

Characterstics, genesis and classification of soils derived from coarse grain granitic materials were discussed with four soil series, such as Samgag, Sangju. Sachon and Yecheon which were distributed over the area of Gangdae-Ri, Nengseo-Myeon, Yeoju-Gun, Gyunggi-Do. The results are as follows. 1. Samgag, Sangju, Sachon and Yecheon had a soil of excessively, well, imperfectly and poorly drained, thus they had a soil drainage sequence. 2. Soil textural class were from sandy loam to loam. Silt and clay content were increased with descending to the local bottom, while sand content was decreased. 3. Soils were very strongly to strongly acid and OM, CEC, exchangeable cation, and available $P_2O_5$ in soils seemed to be increased with ascending to the local boctom. 4. Kaolinite and Quartz were the dominant clay mineral and the other was Vermiculite and Illite. 5. Samgag was classified as Typic Dystrochrepts, Sangju as Dystric-Fluventic Eutrochrepts, Sachon as Aeric-Fluventic Halpaquepts, and Yecheon as Fluventic Haplaquepts.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.497-506
• /
• 2010

This study intended to investigate the environmental factors including soil and vegetation in order to better understand the environmental and ecological characteristics of ten different habitats of $Hanabusaya$ $asiatica$. These habitats, according to investigations, are mostly located on the slopes of mountains facing north at an altitude of 580 m to 1,396 m above sea level with angles of inclination ranging from 5 degrees to 80 degrees. A total of 146 vascular plant taxa are identified in 32 quadrates of the ten habitats. The importance value of $H.$ $asiatica$ is 8.87%, and 5 highly ranked species such as $Carex$ $siderosticta$ (8.67%), $Ainsliaea$ $acerifolia$ var. $subapoda$ (7.10%), $Calamagrostis$ $arundinacea$ (6.79%), $Athyrium$ $yokoscense$ (5.33%), $Astilbe$ $rubra$ (3.11%) are considered to be an affinity with $H.$ $asiatica$ in their habitats. Dominant species of woody plants in ten habitats are represented as $Quercus$ $mongolica$ in tree layer (T1), $Acer$ $pseudo$-$sieboldianum$ in subtree layer (T2), $Rhododendron$ $schlippenbachii$ and $Tripterygium$ $regelii$ in shrub layer (S). The degree of their average species diversity is 1.30, and that of dominance and evenness are 0.08 and 0.88, respectively. The type of soil is sandy loam, loam and loamy sand, and the average field capacity of soil is 23.95%. Their average organic matter is 12.28%, soil pH 5.79, and available phosphorus is 25.48%. Correlation coefficients analysis based on environmental factors, vegetation and soil analysis shows that the coverage of tree layers is correlated with richness, diversity, dominance, evenness and coverage of $H.$ $asiatica$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.85-93
• /
• 2015

Previous studies have estimated crash prediction models with the fixed effect model which assumes the fixed value of coefficients without considering characteristics of each intersections. However the fixed effect model would estimate under estimation of the standard error resulted in over estimation of t-value. In order to overcome these shortcomings, the random effect model can be used with considering heterogeneity of AADT, geometric information and unobserved factors. In this study, data collections from 89 intersections in Daejeon and estimates of crash prediction models were conducted using the random and fixed effect negative binomial regression model for comparison and analysis of two models. As a result of model estimates, AADT, speed limits, number of lanes, exclusive right turn pockets and front traffic signal were found to be significant. For comparing statistical significance of two models, the random effect model could be better statistical significance with -1537.802 of log-likelihood at convergence comparing with -1691.327 for the fixed effect model. Also likelihood ration value was computed as 0.279 for the random effect model and 0.207 for the fixed effect model. This mean that the random effect model can be improved for statistical significance of models comparing with the fixed effect model.