• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.9-14
• /
• 2004

In this paper, temperature dependence of effective ionization coefficient in Si is formulated as a single polynomial function of temperature, which allows analytical expressions for breakdown voltage of Si $p^+n$ junction as a function of temperature. The analytical breakdown voltages agree well with the simulation as well as the experimental ones reported within $3\%$ in error for the doping concentrations in the range of $10^{14}cm^{-3}{\~} 10^{17}cm^{-3}$ at 100K, 300K and 500K.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1023-1026
• /
• 2015

비용 효율적인 소프트웨어 유지보수 방안에 대한 기대가 높다. 본 논문에서는 유지보수 비용을 감소시키기 위해 회귀 테스트에 사용되는 테스트케이스를 효과적으로 우선순위화하는 방안을 제안한다. 테스트케이스를 우선순위화하는 방법으로는 코드의 커버리지를 이용해 테스트케이스의 우선순위를 높이는 방법과 모델 기반 테스트케이스 우선순위화 방법 등 여러 가지 방법이 제안되어 왔다. 본 논문에서는 소스코드, 커밋 로그와 버그리포트의 정보를 이용해 정보검색 기반의 테스트케이스 우선순위화 기법을 제안한다. 변경된 소스코드 이력은 새로운 기능의 업데이트 유무를 확인 할 수 있으며, 결함으로 수정된 파일을 추측할 수 있다. 버그 리포트는 소스코드의 결함에 대한 정보를 담고 있다. 제안한 방법의 유효성을 확인하기 위해 오픈소스 프로젝트(Joda-Time, Commons-Lang)를 이용해 실험을 진행하였다. 실험을 통해 소스코드, 커밋 로그와 버그리포트로 테스트케이스 우선순위화 방법의 유효성을 확인했으며, 버그리포트를 적용해 테스트케이스 우선순위화 기법을 이전 연구에 비해 최대 8% 향상된 결과를 확인 할 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.519-522
• /
• 2001

본 논문은 손으로 자유롭게 그린 서식 문서의 주요점을 검출하여 서식의 구조를 벡터화하는 방법을 제안한다. 선 성분의 주요점을 검출하여 그 구조를 벡터화하는 방법은 주로 인쇄 서식 문서의 구조 분석에 적용하기 좋은 방법이다. 이에 반해 손으로 설계한 서식 문서는 주요점 부분이 왜곡되어 있기 때문에 주요점의 검출이 손쉽게 이루어지기 곤란하다. 이 논문에서는 이러한 문제를 해결하기 위해 손으로 설계한 서식 문서를 세선화한 다음 여유 성분을 갖는 마스크를 적용하고 후처리를 통해 주요점 부분의 심한 왜곡을 보상하는 방법을 제안하여 손으로 설계한 서식 문서에서도 주요점의 검출이 가능하도록 하였다. 제안한 방법의 유효성을 확인하기 위한 실험 결과 손으로 설계한 서식의 경우 91.9%, 인쇄 서식의 경우 100%의 벡터화 성공률을 보여주어 제안한 방법이 손으로 설계한 서식 구조의 벡터화에 유효함을 확인하였다.

• KSBB Journal
• /
• v.4 no.2
• /
• pp.110-117
• /
• 1989

The fiffusion characteristics of substrate of varing biomass concentrations into and from Ca- alginate gel beads in well-stirred solutions were investigated. Ca-alginate gel beads were immobilized by Zymomonas mobilis or free from cells. The values of the diffusion coefficient of substrate were calculated by means of the method of Least squares and Random pore model. Reaction rates are expressed by the Michaelis-Menten type equation, and the results are compared with experimental data. Intraparticle effective diffusivity of substrate resistance on reaction by using immobilized Z.mobilis entrapped by Ca-alginated gel seemed to be restricted by cell density. The experimental data also indicated relationship between the effective diffusivity and the cell concentration used in the gel preparation.

• KSBB Journal
• /
• v.8 no.3
• /
• pp.266-271
• /
• 1993

The effective diffusion coefficients of glucose, sucrose and fructo-oligosaccharides in Ca-alginate gel beads at high concentration of sucrose solutions were investigated at $50^{\circ}C$. A mathematical model for the kinetics of fructo-oligosaccharide production using immobilized cells was proposed and compared with experimental results varying the bead size, the substrate concentration and the bead ratio. Very low values of diffusion coefficients ranging $1.2-7.6\times10^{-7}\textrm{cm}^2$/sec were obtained, and the predicted results were in good agreement with experimental ones in all cases tested.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.397-400
• /
• 2003

본 연구에서는 KM-Net(Hidden Markov Network)을 다양한 태스크에의 적용과 화자의 특성을 효과적으로 나타내기 위해 HM-Net 음성인식 시스템에 MLLR(Maximum Likelihood Linear Regression) 적응방법을 도입하였으며, HM-Net 학습 알고리즘을 개량하여 회귀클래스 생성방법을 제안한다. 제안방법은 PDT-SSS(Phonetic Decision Tree-based Successive State Splitting) 알고리즘의 문맥방향 상태분할에 의한 상태레벨 공유를 이용한 방법으로 새로운 화자로부터 문맥정보와 적응화 데이터의 발성 양에 의존하여 결정된 많은 적응 파라미터들을(평균, 분산) 자유롭게 제어할 수 있게 된다. 제안방법의 유효성을 확인하기 위해 국어공학센터(KLE) 452 음성 데이터와 항공편 예약관련 연속음성을 대상으로 인식실험을 수행한 결과, 전체적으로 음소인식의 경우 평균 34-37％, 단어인식의 경우 평균 9％, 연속음성인식의 경우 평균 7-8％의 인식성능 향상을 각각 보였다. 또한 적응화 데이터의 양에 따른 인식성능 비교에서, 제안방법을 적용한 인식 시스템이 적응 데이터의 양이 적은 경우에도 향상된 인식률을 보였으며. 잡음을 부가한 음성에 대한 적응화 실험에서도 향상된 인식성능을 보여 MLLR 적응방법의 특성을 만족하였다. 따라서 MLLR 적응방법을 도입한 HM-Net 음성인식 시스템에 제안한 회귀클래스 생성방법이 유효함을 확인한 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4C
• /
• pp.221-230
• /
• 2008

The George Massey immersed tunnel passes the Fraser River near Vancouver, Western Canada. The tunnel was founded on sandy soils and its behavior during earthquake was analyzed by an effective stress constitutive model called UBCSAND. This model is able to calculate pore pressure rise and resulting tunnel movements due to cyclic loading. Centrifuge tests conducted at Rensselaer Polytechnic Institute (RPI) were used to verify the model performance. The centrifuge tests consisted of 2 models: Model 1 was designed for an original ground condition, Model 2 for a ground improvement by densification. In Model 1, large deformation of the tunnel was observed due to liquefaction of surrounding soil. Because of the densified zones around the tunnel the vertical and horizontal displacements of the tunnel in Model 2 was 50% less than Model 1. Measured excess pore pressures, accelerations, and displacements from centrifuge tests were in close agreement with the predictions of UBCSAND model. Therefore, the model can be used to predict seismic behavior of immersed tunnels on sandy soils and optimize liquefaction remediation methods.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.89-98
• /
• 2006

In this paper the behavior of saturated sand deposits where liquefaction occurred before is studied for successive earthquakes. The relationship between past pore pressure generation and reliquefaction resistance is examined by using cyclic direct simple shear tests. If the soil sample in direct simple shear produced nearly 90% of excess pore pressure during first time loading, its liquefaction resistance increased during following cyclic loading after consolidation. However, a fully liquefied soil during first time loading has a densely packed condition but shows less liquefaction resistance for the following cyclic loading. UBCSAND model that can account for pore pressure change and stiffness loss of soil during shaking is used to analyze the centrifuge test simulating reliquefaction. The pore pressure rise during first time cyclic loading controls liquefaction resistance. The measurements from reliquefaction centrifuge test are compared with numerical predictions. By considering frequent earthquakes having occurred at the Southern Korea near Japan, such effective stress approach is necessary for reliquefaction study.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.12-17
• /
• 2002

In this paper, an effective ionization coefficient for 4H-SiC is extracted in the form of c .E$^{m}$ from ionization coefficients of electron and hole. Analytical expressions for critical electric field and breakdown voltage of 4H-SiC p$^{+}$n junction are derived by employing the effective ionization coefficient. The analytic results agree well with the experimental ones reported within 10% in error for the doping concentration in the range of 10$^{15}$ cm$^{-3}$ ~10$^{18}$ cm$^{-3}$ . .

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.107-113
• /
• 1997

To achive a robust Korean word recognition system for both channel distortion and additive noise, maximum a posteriori estimation(MAP) adaptation is proposed and the effectiveness of environmental adaptation for improving recognition performance is investigated in this paper. To do this, recognition experiments using MAP adaptation are carried out for the three different speech ; 1) channel distortion is introduced, 2) environmental noise is added, 3) both channel distortion and additive noise are presented. Theeffectiveness of additive feature parameters, such as regressive coefficients and durations, for environmental adaptation are also investigated. From the speaker independent 100 words recognition tests, we had 9.0% of recognition improvement for the case 1), more than 75% for the case 2), and 11%~61.4% for the case 3) respectively, resulting that a MAP environmental adaptation is effective for both channel distorted and noise added speech recognition. But it turned out that duration information used as additive feature parameter did not played an important role in the tests.