• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.25-39
• /
• 2018

In this paper, an integrated analysis model for evaluating the underwater acoustic performance of the multilayered acoustic coatings containing visco-elastic composite layers with hollow glass microspheres is described. The model uses the effective medium theory considering the acoustic scattering and resonance effects of the inclusions. Also, the model incorporates the compressive deformation mechanism associated with hydrostatic pressure. The technique developed in this work was used as the acoustic layer design and performance analysis tools for the practical hull coatings and acoustic baffles in Korean next generation submarines.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.47-48
• /
• 2014

Non-destructive technique to measure internal structure and constant distribution of material can be widely used to exploration of mineral resources, identification of underground cables and buried pipelines, and diagnostic imaging in medical area. In this paper, inverse scattering solution based on 2-dimensional EM scattering problem should be considered and formulated.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2002

The selective removal of cesium by ammonium molybdophosphate (AMP) was studied in order to reduce an interference by high radioactivity of cesium on the determination of low radioactive elements in leachate of spent fuel. The removal of Cs, U, Ce, La, Co Ca, Na Sr and K was investigated for the leachate and the bentonite in contact with a spent fuel. More than 90% of cesium was removed by AMP and Ca, Na, Co and Sr was remained in 0.1 M $HNO_3$. However, three valence elements such as La and Ce were also removed by AMP. Though a little of potassium of the bentonite components was adsorbed on AMP, the potassium in the bentonite solution diluted to its concentration in a real sample would not affect the capacity of AMP greatly. From another experiment for the separation of strontium as a leaching indicator of spent fuel, the recovery of strontium in 8.0 M $HNO_3$ solution by using Sr-resin (Eichrom, P/N SR-B50-A) was more than 95% by eluting with 0.05 M $HNO_3$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.19-32
• /
• 2003

In the conventional photorefractive joint transform correlator(PRJTC), the intensity ration of input signal-to-pump beam should be large enough to saturate two-beam coupling transfer function to obtain a desired correlation result. As a result, the signal-to-noise ratio(SNR) of correlation result is decreased in a noisy input image. In this paper, we propose the improved method for increasing the SNR of the PRJTC by using the characteristics of BaTiO$_3$. We stop the energy transfer saturating by low intensity ratio of input beam and realize a short length of effective interaction in BaTiO$_3$ by making large incident angle of the signal beam. So the gain in high frequency area is decreased and the gain in low frequency area comes up to the saturation gain of the beam coupling transfer function. Therefore the SNR is improved in noisy input image and the PRJTC can be easily realized by low intensity ratio of input beam.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.35-41
• /
• 2011

In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite-Difference Time-Domain(FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Parameters of symmetric coupled MIS transmission line with various gaps between crossbars for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency-dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.901-904
• /
• 2007

Nowadays, in many fields of medical treatment, we can make an observation and a diagnosis of inward disease without using a surgical operation. As one of them, ultra-sound diagnosis system can be available widely in its cost and size compared with other medical instruments. This system also make it possible for us to see the inner parts of the body in real time harmlessly for a long time. So it can be utilized to inspect the movement of heart or fetus and to diagnose an internal disease of the soft tissues. Ultra-sound images can be generated by the reflexive and scattered wave through the pulse generator and so in ultrasound images there exist inherently many affective noised signals. In this paper, we are to take an noise-restrained image and to extract a more affective regions of the images.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1367-1374
• /
• 2008

A new high-gain Fabry-$P{\acute{e}}rot$ cavity antenna for wireless broadband internet(Wibro) base station antennas, which is covered with metamaterial superstrate presenting simultaneous negative values of permittivity and permeability, is proposed. To facilitate the fabrication process using the printed circuit board(PCB) technology of today, a new planar-type metamaterial superstrate is designed, which shows negative and low positive values of a refractive index near the Wibro service frequency band. And the principle of antenna gain enhancement is analyzed from the two different view points of effectively low refractive index and of the Fabry-$P{\acute{e}}rot$ resonance condition. Single square patch antenna is used as a feeder. The separation distance is determined by considering the reflection phases of the metamaterial superstrate and the substrate satisfying Fabry-$P{\acute{e}}rot$ resonance condition, respectively. Comparison between the prediction and the measurement shows good agreement, which verifies the validity of our design approach.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.98-98
• /
• 2011

수직으로 정렬된 1차원 나노구조는 입사되는 빛에 대하여 반사율을 줄일 수 있는 유효 굴절률 profile을 갖고 있어, 태양광소자 및 광전자소자의 성능을 향상시키기 위해 널리 응용되어 왔으며, 이러한 수직으로 정렬된 1차원 나노구조를 제작하는 연구가 매우 활발하게 이루어지고 있다. 그 중 화학적 방법으로 성장시킨 산화아연 나노로드(ZnO nanorod)는 비교적 간단하고 저렴한 제작공정을 통해서 높은 결정성을 갖는 수직형 1차원 나노구조체로 이용 할 수 있다. 한편, 효과적인 무반사(antireflection) 층을 제작하기 위해서는 표면에서 발생되는 Fresnel 반사율을 낮춰야 하는데, 이를 위해서 입사되는 매질에서 기판 사이의 유효 굴절률이 연속적이고, 점진적인 변화가 필요하다. 이에 본 연구에서는 무반사 특성향상을 위해서 실리콘 (Si) 기판위에 tapered 산화아연 나노로드를 화학적으로 성장시켜 반사율 특성을 분석하였다. 실험을 위해, 먼저 Si 기판에 AZO (Al doped ZnO) seed 층을 RF magnetron 스퍼터를 사용해 증착한 후, zinc nitrate $Zn(NO_3)_2{\cdot}6H_2O$과 hexamethylentetramines으로 혼합된 용액에 담가두어 산화아연 나노로드를 성장시켰다. Tapered 산화아연 나노로드를 형성하기 위해 용액의 온도를 서서히 낮춤으로 산화아연나노로드의 끝을 뾰족하게 제작할 수 있었다. 한편, 이론적으로 AZO seed 층의 두께에 대한 반사 스펙트럼을 rigorous coupled wave analysis (RCWA) 계산법을 통해서 시뮬레이션을 수행하였으며, 최적화된 AZO seed 층의 두께를 결정하여, 그 위에 tapered 산화아연 나노로드를 성장시켜 반사율을 측정하여 무반사 특성 향상을 확인 할 수 있었다. 또한, 태양광소자 응용을 위해, 표준 AM1.5G 태양광 스펙트럼을 고려한 solar weighted reflection을 계산하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.513-520
• /
• 2001

In this paper, the directional coupler using three layer microstrip substrate is proposed and the design method is notified. Modified re-entrant mode coupler is the proposed structure that one layer is added on upper plane of coupled transmission lines and the floating conductor is placed on added layer's upper planes. This structure has high coupling for the increase of odd mode capacitance and also has good performance in VSWR, isolation, phase difference because the difference of effective permittivity is small in each mode. We have designed the coupler from the calculation of impedance, effective permittivity, coupling coefficient using even, odd mode analysis method. From the simulation and measurement, proposed coupler has about 2 dB more tighter coupling than conventional coupler and also has good performance in VSWR, isolation, phase difference.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.572-578
• /
• 2006

The accumulation of phenol in apples was measured by exposing them to phenol vapor at $25^{\circ}C$. The effective diffusivities of phenol in the rind and flesh of apples were estimated by comparing the experimentally determined fractional uptake curve with the simulated ones based on a consecutive diffusion model in the rind and flesh. Phenol was detected in the flesh of apples after 5 day exposure due to its slow diffusion in the rind. The consecutive diffusion model of phenol in apples simulated well the measured fractional uptake curve when the effective diffusivities of phenol in the rind and flesh were assumed to be $5.0{\times}10^{-13}m^2/s$ and $1.5{\times}10^{-10}m^2/s$, respectively.