• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.172-174
• /
• 2018

기존선형과 저항을 최소화하는 최적선형에 대한 에너지효율 성능을 평가하는 것이다. 설계 흘수와 설계 선속을 고려하여 대상선박의 선수부 형상을 검토하였다. 실제 운항 상태에서 대상선박의 저항성능을 평가하였다. 상용 전산유체역학(CFD) 코드와 수조 모형시험 자료는 유효마력 평가를 위해 사용되었다. 실제 운항 상태를 고려하여 최소저항을 가지는 최적선형을 제시하였다. 기존선형과 최적선형에 대하여 3가지 선속에서 유효마력을 추정하였다. 최적선형의 저항성능은 기존선형과 비교하여 볼 때 설계속도(12노트)에서 약 6% 향상된 결과를 보여 주었다. 준추진효율 계수(ETAD, ${\eta}D$)는 모형시험 자료를 활용하였다. 에너지 효율 성능은 년간 운항일수, 벙커C유 가격, 1일 연료사용량 그리고 연료소비계수를 바탕으로 작성되었다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.2
• /
• pp.199-209
• /
• 1995

From the results of model tests, statistical regression analysis of EHP estimation based on hull form parameters is adopted in this study. From this result, the method for estimation of EHP at the initial design stage of fishing boats is developed. This method is applied to four standard fishing boats with chine lines and two standard fishing boats with round bottom. The EHP's are estimated and compared to experimental results. In the case of six fishing boats, the estimated EHP corresponds well and approximates well with experimental results through out all the range tested. From these results it can be concluded that this numerical method is very efficient in estimating EHP of fishing boats having chine line and round bottom. Therefore, by applying the proposed method to design of fishing boats, we can improve the resistance characteristics. Further, this method can contribute to reduction of design time and thus down the total expenses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.574-579
• /
• 2016

Grid systems used in previous studies were determined to be valid only if the length between the perpendiculars in a model ship was in the range of 6-8 m, and the maximum dynamic trim angle was smaller than $1^{\circ}$. The application of the grid system to a small fishing boat can create numerical instability because the dynamic trim of small boats is generally larger than $3^{\circ}$, and their Froude numbers are in the range of 0.3-0.8. In the present study, resistances of a small fishing boat were stably obtained by reducing the length between the center of buoyancy and the inlet boundary of the numerical domain, and by refining grid cells vertically in a region that would be swept by a free surface. The effective power of the small fishing boat was predicted based on the ITTC-1978 two-dimensional analysis. By using the results of previous towing tank tests, the coefficient of quasi-propulsive efficiency and the brake horsepower at a design draft were calculated.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 1994.06c
• /
• pp.69-69
• /
• 1994

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.432-438
• /
• 2017

The primary objective of the current work was to develop a standardized retrofit hull form capable of saving energy based on existing vessels. The bow shape of existing vessels was investigated, giving consideration to design draft and speed. Resistance performances were assessed for existing vessels according to operating conditions. Commercial CFD codes and model test materials were used for assessment of effective power. Three retrofit hull forms with minimum resistance were selected given real operating conditions. These vessels were named after customized ready-made hull forms to enable ship owners to make easier choices. The effective power of each vessel was estimated under real operating conditions. Subjects were operated with the lowest draft, and performance for retrofit No. 3 showed an 11-16% improvement in effective power at low speed ranges of 16-18 knots compared to existing vessels. When operated with a middle draft, performance for retrofit No. 3 showed a 6-11% improvement in effective power at low speed ranges compared to existing vessels. When operated with the highest draft, performance for all vessels showed little difference in effective power.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.965-971
• /
• 2017

The primary objective of this study was to assess the energy efficiency performance of an optimized hull form capable of saving energy based on existing vessels. The bow shape of existing vessels was investigated, giving consideration to design draft and speed. Resistance performances were also assessed for existing vessels according to operating conditions. Commercial CFD codes and model test materials were used to assess effective power. An optimized hull form with minimum resistance was selected given real operating conditions. The effective horsepower of existing and optimized vessels was estimated at three speeds. Resistance performance for an optimized vessel showed a 6 % improvement in effective horsepower at design speed (12 knots) compared to existing vessels. Quasi-propulsive efficiency employed experimental data, while energy efficiency performance was analyzed based on operating days, bunker fuel oil C cost, daily fuel oil consumption and specific fuel oil consumption. Energy efficiency performance for an optimized vessel showed a gain of 30 million won per year in reduced costs at design speed (12 knots) compared to existing vessels.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.71-76
• /
• 2009

This paper describes a statistical analysis method for predicting a coast fishing boat's effective horsepower. The EHP estimation method for small coast fishing boats was developed, based on a statistical regression analysis of model test results in a circulating water channel. The statistical regression formula of a fishing boat's effective horsepower is determined from the regression analysis of the resistance test results for 15 actual coast fishing boats. This method was applied to the effective horsepower prediction of a G/T 4 ton class coast fishing boat. From the estimation of the effective horsepower using this regression formula and the experimental model test of the G/T 4 ton class coast fishing boat, the estimation accuracy was verified under 10 percent of the design speed. However, the effective horsepower prediction method for coast fishing boats using the regression formula will be used at the initial design and hull-form development stage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.405-411
• /
• 2014

It needed the calculation of the required tugboat's power to move the damaged vessel to the safe area for reducing the additional damages. In this paper, it was verified the theoretical calculation method on the required power of tugboat through the 93m real ship tests. From the experiments, it was considered that the theoretical calculation method was sufficient to estimate the required power of tugboat. The resistance of the locked propeller was relatively big portions compared with other static resistances such as air resistance, frictional resistance and residual resistance. And dynamic resistance induced by swing movement and yawing was continuously occurred and it also was great effects on the total resistance. In the future, the safety factor will be considered and the exact prediction of ship's resistance will enhance the efficiency of tugboat because of the minimization of safety factor.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.585-591
• /
• 2014

The primary objective of the current work is to predict speed performance of the medium patrol boat over $F_N=0.5$ employing experimental materials based on the CFD before model tests. In other words, the predicted brake powers according to ship speeds are assessed satisfying the main engine capacity. The subject ships are selected the two different stern hull forms. The flow computation are conducted considering free surface and dynamic trim using a commercial CFD code(STAR-CCM+). The resistances of the bare-hull are obtained from CFD. Wave patterns, pressures and limiting streamlines on the hull and velocity distribution in the propeller plane for the two hull forms are compared using CFD. The effective powers of the object ships are assessed based on CFD. Resistance increase according to the attached appendages and quasi-propulsive efficiency are employed the experimental datas. Speed performance prediction method concerning high speed vessels like a medium patrol boat is developed employing CFD and experimental data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.627-633
• /
• 2019

This study aimed to predict the resistance and propulsion performance of a ship using computational fluid dynamics (CFD) and a database as well as establish an assessment method for the energy efficiency design index (EEDI) using the results. First, the total resistance of the studied ship is obtained using CFD. A flow analysis is conducted with the free surface and trim and sinkage using a commercial CFD code (STAR-CCM+). The effective power of the ship is assessed based on the CFD results. The quasi-propulsive efficiency is calculated from an empirical prediction equation using experimental data and similar material. Finally, a general calculation program for the EEDI is established based on the hydrodynamic results, ship information for principal particulars, conversion factor of $CO_2$ for fuels, and fuel consumption.