• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.327-333
• /
• 2001

Estimation of the frequency response of Ti:LiNb03 traveling-wave optical modulator with phase reversal electrodes is succinctly presented. The fact that such devices may have bandpass characteristics is demonstrated through simulations based on the derived equations. The influence of each parameter of traveling-wave electrodes on the frequency response is investigated in detail. It is shown that the center frequency and the bandwidth of response curves can be effectively adjustable by changing the MW effective index and the interaction length of the electrodes. rodes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.369-374
• /
• 2007

For a stability design of steel frames, AISC-LRFD specification recommend to use Alignment Chart and story-based methods in order to determine an effective budding length. Recently, elastic buckling analysis, which is the method that calculate the effective length of members using eigenvalue of the overall structure, has been widely used in practical design of steel frames because this method can be performed effectively and automatically by computers. However, it can in some cases lead to unexpectedly large effective length in column having small axial forces. Therefore, this paper propose a method using elastic buckling analysis, which estimate a proper effective buckling length for all members having a small axial force. For verification of proposed method, it is compared with system based approach and stiffness distribution factor method. As a result, proposed method can rationally solve a problem in some case of column having small axial force. Also, adoption range for proposed method is established.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.109-123
• /
• 1996

A series of quasi-static crushing tests were carried out on thin-walled square tube specimens with axial and/or circumferential stiffeners including unstiffened specimens. The effective crushing length and mean crushing strength of the test specimens were investigated. Using the equivalent plate thickness approach, a simplified analytical model for predicting the mean crushing strength of stiffened square tubes has been developed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.1 s.20
• /
• pp.5-13
• /
• 2005

In order to evaluate the credibility of the welded joint design for combat vehicle using A12519, the numerical analysis for the joint model has been studied and the results are compared with the experimental works by the impact projectiles. The numerical approach using LS-DYNA involves the process of the crack initiation and propagation as well as the applications of the failure criteria for both the ductile and brittle failures. The good agreement between the numerical and experimental works are proved.

• Korea Information Processing Society Review
• /
• v.5 no.3
• /
• pp.56-62
• /
• 1998

단문 메시지 서비스(Short Message Service)는 짧은 길이의 텍스트 메시지를 이동 단문 단말들간에 전송하는 데이터 서비스이다. 이 서비스는 통화로를 직접적으로 이용하지 않으며 구현과 이용이 쉽고 다양한 부가서비스를 제공할 수 있다 본 논문에서는 단문메시지를 상용 CDMA 망에 구현한 예를 제시하고자 한다. 단문 메시지 센터를 도입하고 메시지 서버를 개발하였으며 기존 이동전화 망의 프로토콜을 단문 메시지 서비스를 위해서 개선하였다 이 프로토콜을 교환기와 이동가입자 위치등록기등의 CDMA 망에 적용하였다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.72-79
• /
• 1994

In this paper semi empirical models are presented for the hot electron induced threshold voltage shift(${\Delta}V_{t}$) and effective channel shortening length (${\Delta}L_{H}$) in degraded PMOSFET. Trapped electron charges in gate oxide are calculated from the well known gate current model and ΔLS1HT is calculated by using trapped electron charges. (${\Delta}L_{H}$) is a function of gate stress voltage such as threshold voltage shift and degradation of drain current. From the correlation between (${\Delta}L_{H}$) has a logarithmic function of stress time. From the measured results, (${\Delta}V_{t}$) and (${\Delta}L_{H}$) are function of initial gate current and device channel length.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.47-52
• /
• 2011

In this paper, to evaluate the design properties of 3D optical multimode interference (MMI) couplers with ultracompact width, modal transmission line theory and effective dielectric method are combined with together. A coupling efficiency based on the composed approach is defined, and the coupling length is numerically determined for the design of 3 dB coupler, cross coupler and bar coupler. The simulation result shows that the designed MMI coupler has a low insertion loss and a high splitting ratio.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.4
• /
• pp.21-31
• /
• 1993

불규칙한 기하구조 및 기하학적 특이점들을 갖는 방사체에 의해 형성되는 음장을 예측하는 작업은 매우 어려운 일이다. 이러한 종류의 문제를 해결하기 위하여는 Seybert에 의해 제창된 내, 외부를 연성하여 해석하는 경계요소법에 의한 해석이 유용하다고 여겨지고 있다. 본 연구에서는 연성경계요소법을 재 구성하여 예제로서 얇은 벽면을 갖는 개방된 관에서 방사되는 음장을 선택한 후, 이 방법의 신뢰성, 적용성 및 오차에 대한 해석을 해?ㄴ다. 외부 방사 문제에 있어서의 비유일성문제는 소외 CHIEF 기법을 도입하여 해결하였다. 두 개의 마이크로폰을 사용하여 신호처리를 통한 실험 결과와 본 경계요소법에 의한 결과는 서로 잘 일치하였다. 한편 경계면에 몹시 가까운 지점에서의 음장을 예측할 때의 오차 해석을 수행한 결과, 예측 오차가 10% 이내에서 유지되려면 경계요소법의 가장 짧은 변의 길이가 예측점과 벽면 사이의 거리보다 최소한 10배 이상은 커야함을 알아내었다. 이 기법은 기하학적인 특이점을 포함하는 각종 음향 문제에 매우 유효 적절한 방법으로 생각된다.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.162-167
• /
• 2005

An optical directional coupler, which consists of quantum wells with nanothickness, is designed by using Modal Transmission Line Theory (MTLT). To demonstrate the validity and usefulness, the propagation characteristics and the coupling efficiencies are rigorously evaluated at nanoscale couplers, which consist of double quantum wells with different effective masses. The numerical result reveals that the coupling efficiency of nanoscale couplers is maximized at a coupling length 2052.3 nm, if the total electron energy is 83.9 meV. Furthermore, the coupler operates as a filter with narrower band as the barrier thickness increases.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.80-87
• /
• 1994

인버터 승강기의 전원설비, 즉 간선굵기와 변압기 용량의 설계 기준을 정립하기 위하여, 국내 승강기업체에서 고층 아파트와 빌딩에 설치한 인버터 승강기를 대상으로 전원설비 용량산정이 기준이 되는 가속전류와 전부하상승전류를 측정하고 분석하였다. 그 결과, 가속전류는 각 업체에서 제시하는 값에 비해 작아졌으나 전부하상전류는 국내 승강기 업체의 기술수준의 미흡으로 인해 크게 나타났다. 이에 따라, 전선의 길이가 100m이상인 경우에는 허용전압강하에 의한 계산이 유효하게 되어 전선의 단면적을 한단계 줄일 수 있고, 변압기 용량은 각 사의 제시값에 비해 속도 60m/min의 경우에는 1∼4[kVA]정도, 90m/min인 경우에는 3∼5[kVA]정도 커지게 된다.