• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.75-75
• /
• 2022

우리나라는 깨끗한 상수원수를 확보하고 각종 오염과 유해물질의 유입을 원천적으로 차단하여 상수원의 수질보전을 위해 필요하다고 인정되는 지역을 상수원보호구역으로 관리하고 있다. 상수원 수질관리를 위해 상수원보호구역 내에서는 명백한 오염유발행위 일체를 금지하고 있으며 건축물 신축 등 개발행위에 대해서는 공익시설 및 보호구역에 거주하는 주민의 소득기반 및 생활환경 개선을 위한 최소한의 행위만을 허가하는 등 강한 규제를 시행하고 있다. 상수원보호구역제도의 상수원 관리효과와 비례하여 상하류 지역의 사회적 갈등에 대한 개선요구도 증가하고 있다. 상수원보호구역 내 강한 규제로 인해 상류주민들은 재산권의 제약으로 사유재산에 대한 형평성문제 및 수처리 기술개발이 향상되어 과거와 같은 강한 입지규제에 대한 합리적 규제기준 조정을 요구하고 있으며 하류 지역에서는 상수원보호구역의 완화로 인해 발생할 수 있는 수질악화를 고려하여 강한 규제의 유지를 요구하고 있다. 이와같이 상수원보호구역제도로 인한 상류와 하류의 이해관계가 달라 이에 대한 합의가 이루어지지 않고 있다. 본 연구는 상류주민들의 재산권제약에 대한 피해정도와 하류주민들의 수질보호로 인한 편익을 정량적으로 비교해 봄으로써 상수원보호구역으로 인한 사회적 갈등 조정에 대한 정책적 시사점을 도출하고자 한다.

• Resources Recycling
• /
• v.17 no.6
• /
• pp.3-9
• /
• 2008

The Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment commonly referred to as the Restriction of Hazardous Substances Directive or RoHS was adopted in February 2003 by the European Union. The RoHS directive took effect on 1 July 2006, and is required to be enforced and become law in each member state. This directive restricts the use of six hazardous materials in the manufacture of various types of electronic and electrical equipment. It is closely linked with the waste electrical and electronic equipment directive (WEEE) 2002/96/EC which sets collection, recycling and recovery targets for electrical goods and is part of a legislative initiative to solve the problem of huge amounts of toxic e-waste.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.8
• /
• pp.579-587
• /
• 2014

Various kinds of micro organic pollutants have frequently been detected from a water system. Therefore, it is considered to be very important part in the drinking water treatment system. And the research about removal process and processing efficiency have been being conducted briskly. In this study, the removal efficiency was evaluated using advanced water treatment process and nanofiltration process. The removal efficiency of nanofiltration process was very different according to physical and chemical characteristics of materials. The molecular weight of cutoff was the most influential factor in the removal efficiency. And when pKa value was higher than pH of raw water or Log Kow value was below 2, the removal efficiency of material was decreased. In case of oxidation reaction, the bigger the molecular weight of material was and the more hydrophobic a material was, the less oxidation reaction occurred. And the removal efficiency was decreased. Most unoxidized materials were removed by absorption. And the more actively oxidation reaction occurred by $H_2O_2$, the more absorption reaction increased.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.595-602
• /
• 2005

Ionic liquids (ILs) are the ionic salts pertaining to liquid-state at lower temperature than $100^{\circ}C$. ILs have attracted attention as new media because of their peculiar chemical, physical or electrical properties such as low volatility, nonflammability, liquid-phase stability at high temperature, high ability in solvating organic, inorganic or polymeric materials, and high ionic conductivity. Since the properties can be modified by assembling the pair using various anions and cations, ILs are often called designer solvents. In addition, ILs have been expected as new green media to replace the volatile organic solvents, which have been widely used in chemical, energy, material, and electronic industries, as well as to enhance the reaction activity and selectivity. In this review paper, the structures, properties, applications, and technology trend of ILS are introduced.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.358-365
• /
• 2016

Removing hazardous materials from water resources is very important for efficient utilization of the resources, and adsorptive removal is regarded as a competitive technology when good adsorbents with high capacity/selectivity are available. Metal-organic framework (MOF), composed of both organic and inorganic (metallic) species, have been tried for various adsorptions because of huge surface area/pore volume, well-defined pore structure, and facile functionalization. In this review, we summarized technologies on adsorptive removal of hazardous organics from water mainly using MOFs as adsorbents. Instead of reporting high adsorption capacity or rate, we summarized mechanisms of interaction between adsorbates (organics) and adsorbents (MOFs) and methods to modify or functionalize MOFs for effective adsorptions. We expect for readers of this review to understand needed characteristics of adsorbents for the adsorptive removal, functionalization of MOFs for effective adsorption and so on. Moreover, they might have an idea on storage and delivery of organics via understanding of the mechanism of adsorption and interaction.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.435-441
• /
• 2015

Concrete, as a porous media, has permeability and it is considered as a major parameter for durability evaluation. Cold joint caused by delayed placing of concrete accelerates water permeation and intrusion of harmful ions. In the paper, concrete specimens containing GGBFS (Ground Granulated Blast Furnace Slag) and OPC (Ordinary Portland Cement) are prepared with cold joint section, and water permeability and water flow at the age of 91 days are measured for 2 weeks. Sound concrete with GGBFS shows decreased permeability to 89% for sound concrete with OPC and 0.86 of decreasing ratio is evaluated in GGBFS concrete with cold joint. Through WPT (Water Penetration Test), the effects of mineral admixture and cold joint on water permeability are evaluated, and variation in water behavior via cold joint is analyzed through probabilistic method as well.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.96-100
• /
• 1998

The effects of electron acceptors and acclimation of inoculum on the anaerobic degradation of benzene, toluene, and m-xylene (BTX) were investigated to enhance the rate of degradation by estuarine sediment inoculum. With the fresh sediment inocula, degradation of BTX ensued after a 10-week acclimation period, and 37~61% of benzene and 57~61% of toluene were degraded after 16 weeks. Sediments from heavily contaminated sites showed higher degradation rates of BTX. After a 6-month of acclimation, degradation onset rapidly from the time of BTX addition and no difference was found among the sediment inocula. Single compound of BTX was slowly degraded in the methanogenic conditions, however, the degradation of BTX mixture was slow in the denitrifying conditions. Although the degradation rate of m-xylene was the fastest among the components of BTX mixture, longer acclimation enhanced the degradation rate of BTX, especially that of benzene. When the culture fluids were tested with Microtox, anaerobic degradation of BTX reduced the toxicity of BTX as well.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.577-586
• /
• 2012

The smartphone emerged due to the rapid development of the Internet has brought greater convenience to life in a positive manner. Recently, however, because of unconstrained exposure to harmful video, reckless use of smart phones has become a domestic issue in our society. In this paper, a service which detects harmful videos by using the acoustic information is designed and implemented on the Android OS. In order to implement the service of Android OS-based detection of the harmful movie, the speed of existing sound-based detection method for harmful videos is improved. The GMM(Gaussian Mixture Model) was used for classifier and the number of Gaussian Mixture was 18. The implemented service shows a detection rate of 97.02% for a total of 1,210 data files (approximately 687 hours) which comprises 669 general videos files (about 424 hours) and 541 harmful video files (about 263 hours). It's speed is 5.6 times faster than the traditional methods whitout reducing the detection rate.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.75-82
• /
• 2011

Recently the technology of green growth became more important role among the problems of running out of fossil fuels and global warming. To procure a new growth power combined with energy and green growth, a lot of investment for wind power, photovoltaics system, fuel cell and biofuel expanded day by day. Among these, wing power has a merit of a highly economic and no discharge of toxic substance. These days government and industrial companies actively support the development of wind power technology with lots of investment, but domestic related education and equipment still stay in research level when it is compared with foreign advanced countries which lead the wind power technology. Therefore to expand the base of basic skill required in the related industrials and to advance technology, we are in the situation to be needed a development of a new curriculum and educational equipment which is analogous with the actual industrial system. In this paper a development of a new educational equipment for the learning of turbine control is introduced. This educational equipment has been developed for students to get easy understanding for the theory of wind turbine control. And finally to demonstrate the effect of the use of the developed equipments and curriculum a questionnaire carried out.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.52-57
• /
• 2011

This study was conducted to examine the possibilities to utilize the mixture of domestic and organic wastes from B-city as a fuel. All types of mixing ratio for uncarried waste, sludge cake, and food waste were found 10 generate heating value with 6,000 kcal/kg, and in case of sludge cake the concentration of toxic substance produced was found to be decreased as air-fuel ratio and temperature were increased. It was noted that toxic gases such as CO, NOx, and SOx were observed below concentration of emission standard, and temperature inside the incinerator was stabilized at 2 of air-fuel ratio and 800$^{\circ}C$. It was observed that a heating value of 6000 kcal/kg generated using RDF(Refuse Derived Fuel) was appropriate to utilize a fuel if a complete combustion was attained.