• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.789-796
• /
• 2012

Radiated noise analysis from a ship structure is a challenging topic owing to difficulties in the accurate calculation of the fluid-structure interaction as well as owing to a massive degree of freedom of the problem. To reduce the severity of the problem, a new fluid-structure interaction formulation is proposed in this paper. The complex frequency-dependent added mass and damping matrices are calculated using the high-order Burton-Miller boundary integral equation formulation to obtain accurate values over all frequency bands. The calculated fluid-structure interaction effects are added to the structural matrices calculated by commercial finite element software, MSC/NASTRAN. Then, the impedance and underwater radiation noise due to an excitation of structure are calculated. The present formulation is applied to a ship to calculate the underwater radiated noise.

• Journal of KSNVE
• /
• v.10 no.3
• /
• pp.444-450
• /
• 2000

Wheel-rail noise is normally classified into three catagories : rolling impact and squeal noise. In this paper rolling noise caused by the irregularity between a wheel and a rail is analysed as follows: The irregularity between the wheel and the rail is assumed as linear superposition of sinusoidal profiles. Wheel-rail contact stiffness is linearized by using Hertzian contact theory and then contact force between the wheel and the rail is calculated. vibration of the rail and the wheel is calculated theoretically by receptance method or FEM depending on the geometry of the wheel or the rail for the frequency range of 100-500 Hz important for noise generation. The radiation noise caused by those vibration response is computed by BEM To verify this analysis tools rolling noise is calculated by proposed analysis steps using typical roughness data and these results are compared with experimental rolling noise data. This analysis tools show reasonable results and finally used for the prediction of the Korean high speed train rolling noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.11
• /
• pp.1192-1201
• /
• 2009

Analysis of the vibration characteristic for cylindrical shell is more complex than plates since the coupling effects are considered on three dimensions. Based on Love's equation, spectral finite element method(SFEM) is introduced to predict frequency response function of finite circular cylindrical shell in the air with simply supported - free boundary condition without simplifying the equation of motion. And for the radiated noise analysis of cylindrical shell, indirect boundary element method(BEM) is applied using out-of-plane displacements as an input from structural vibration analysis. Comparisons of the structural vibration results by the spectral finite element method and commercial code, NASTRAN(FEM based) are carried out. Likewise, for verification of radiated noise analysis results, commercial code, SYSNOISE(BEM based) are used.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1073-1080
• /
• 2012

Incremental forming is a cold working process in which a small part of the material is being deformed and the area of local deformation is moving over the entire material. In this paper, we study description schemes to perform finite element analysis for the incremental forming. The selected description schemes to examine are the Lagrangian description and the arbitrary Lagrangian-Eulerian (ALE) description. The sliding boundary scheme coupled with ALE is also examined to overcome the distortion problems of elements on the contact surface. Results show that the ALE description with the sliding boundary scheme is most favorable in overcoming the distortion of elements. This description leads to make the simulation continued to the final stage of the incremental forming. On the other hand, the Lagrangian description as well as the original ALE description makes the elements much distorted and the analysis is stopped long before arriving at the final shape of deformation.

• Journal of the Korean Vacuum Society
• /
• v.1 no.2
• /
• pp.269-276
• /
• 1992

경계 요소법을 이용하여 Finely-focused ion beam 시스템을 위한 전계형 시뮬레 이터를 개발하였다. 경계 요소법을 시뮬레이터에 적용함으로써 기존의 유한 요소법, 차분근 사법에서는 피할 수 없었던 내부격자망 구성이 불필요하게 됨에 따라 계산속도를 현저히 줄 일 뿐만 아니라 불규칙 경계에 대한 요소분할이 가능하게 되어 최적렌즈구조 설계의 새로운 요소인 전극구조의 모양을 자유롭게 시뮬레이션 할 수 있게 되었다. 또한 개발된 시뮬레이 터를 이용하여 최적조건을 만족하는 구조를 제안한다. 이때 렌즈설계조건은 beam half-angle 3.0 mrad, working distance 50mm, 빔에너지 퍼짐 (beam energy spread) 10eV, 가속에너지 35keV이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.45-53
• /
• 1991

The underground structure, which has infinite or semi-infinite boundary conditions, is subjected by body forces and in-situ stresses. It also has stress concentration, which causes material nonlinear behavior, in the vicinity of the excavated surface. In this paper, some methods which can be used to transform domain integrals into boundary integrals are reviewed in order to analyze the effect of the body forces and the in-situ stresses. First, the domain integral of the body force is transformed into boundary integral by using the Galerkin tensor and divergence theorem. Second, it is transformed by writing the domain integral in cylindrical coordinates and using direct integration. The domain integral of the in-situ stress is transformed into boundary integral applying the direct integral method in cylindrical coordinates. The methodology is verified by comparing the results from the boundary element analysis with those of the finite element analysis. Coupling the above boundary elements with finite elements, the nonlinear behavior that occurs locally in the vicinity of the excavation is analyzed and the results are verified. Thus, it is concluded that the domain integrals of body forces and in-situ stresses could be performed effectively by transforming them into the boundary integrals, and the nonlinear behavior can be reasonably analyzed by coupled nonlinear finite element and boundary element method. The result of this research is expected to he used for the analysis of the underground structures in the effective manner.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.423-424
• /
• 2011

Lax-Wendroff 기법을 기반의 천수방정식에 대한 유한요소 모형을 낙동강 상류부 단호교 지역에 적용하였다. 모형의 검증을 위하여 이동경계에 대한 Thacker (1981)의 정확해와 침수-노출 기법(wet-dry scheme)을 이용한 본 모형의 수치해를 비교하여 대체로 잘 일치함을 알게 되었다. 또한, U자형 만곡부를 포함한 수로의 흐름에 적용하여, 기존의 수리실험 결과, 수치모의 결과와 비교하고, 모형의 적용 가능성을 확인하였다. 낙동강 상류지역에 위치한 단호교 지역에 본 모형을 적용하고, 이를 기존 유한차분법에 의한 수치해와 비교하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.18-24
• /
• 1991

항내 정온도 해석은 일반적으로 유한차분법, 유한요소법 및 경계적분 방정식법 등의 엄밀해법과 근사 경계적분법, 고산의 방법 및 파향선법 등의 근사해법으로 구분된다. 엄밀해법은 지배방정식을 이산화 이외의 근사를 사용하지 않고 푸는 수치계산 방법으로 임의형상에의 적용성과 엄밀성이 뛰어나나 대상으로 하는 파의 파장이 짧고 항의 규모가 큰 경우에는 계산용량이 증대되여 실용적이지 못하다.(중략)

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.308-313
• /
• 2009

본 논문은 확장된 이동최소제곱 유한차분법을 이용하여 1차원 Stefan 문제를 해석할 수 있는 수치기법이 제시한다. 이동하는 경계의 자유로운 묘사를 위해 요소망이나 그리드 없이 절점만을 사용하는 이동최소제곱 유한차분법을 사용하였으며, 계면경계의 특이성을 모형화하기 위해 Taylor 다항식에 쐐기함수를 도입했다. 지배방정식은 안정성이 높은 음해법(implicit method)을 이용하여 차분하였다. 미분의 특이성을 갖는 이동경계를 포함한 반무한 융해문제의 수치해석을 통해 확장된 이동최소제곱 유한차분법이 높은 정확성과 효율성을 갖는 것을 보였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.195-198
• /
• 2003

정밀 수치해석으로 구한 태핑음 데이터를 기준으로 하여 복합재료 구조물 내의 층간분리 손상의 존재 여부를 판단하는 비파괴 검사법을 제안하였다. 태핑음의 수치 모사를 위해 동적 접촉 알고리듬을 이용한 유한요소법과 경계요소법을 이용하였다. 태핑음 수치해석 과정에 대한 정식화를 수행하고 실제 구조물의 태핑음과 비교하여 수치해석 기법의 타당성을 밝혔다. 웨이브릿 페킷 변환에 근거한 특성 추출법을 이용하여 태핑음으로부터 손상 판단을 위한 특성을 추출하고 손상 판단의 지표가 되는 특성 지수를 정의하였다. 복합재료 구조물에 대한 층간분리 손상 검출과정을 시연함으로써 제시된 태핑음 검사법의 타당성을 밝혔다.