• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.231-242
• /
• 2009

In the design of a sky-bridge, repetitive boundary nonlinear time history analyses are required to accurately predict dynamic behaviors of the connected buildings because the connection systems of a sky-bridge usually have high nonlinearity. If a conventional finite element model for entire high-rise buildings is used for repetitive boundary nonlinear time history analyses, computational efforts could be significant. In this study, an equivalent cantilever model considering the belt-wall effect has been proposed for an efficient dynamic analysis and a performance evaluation of vibration control of high-rise buildings connected by a sky-bridge. To verify the accuracy and efficiency of the proposed equivalent model, boundary nonlinear time history analyses of 49- and 42-story example buildings connected by a sky-bridge have been performed for wind excitation. Based on the analytical results, it has been verified that the proposed equivalent model can provide accurate dynamic responses of building structures connected by a sky-bridge with significantly reduced computational efforts.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.301-310
• /
• 2003

In order to design accurately sand compaction pile (SCP) method with low replacement area ratio, it is important to understand the mechanical interaction between sand piles and clays and its mechanism during consolidation process of the composition ground. In this paper, a series of numerical analyses on composition ground improved by SCP with low replacement area ratio were carried out, in order to investigate the mechanical interaction between sand piles and clays. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, could be confirmed comparing with results of a series of model tests on consolidation behaviors of composition ground improved by SCP. And, through the results of the numerical analyses, each mechanical behavior of sand piles and clays in the composition ground during consolidation was elucidated, together with stress sharing mechanism between sand piles and clays.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1399-1406
• /
• 2011

The reducer of the mixer is one of the main parts of the processor used for water and wastewater treatment. In this study, an advanced reducer with a drywell structure was developed in order to prevent oil leakage during operation in the field. During the development of the advanced reducer prototype, a mockup, a metal mold, and a cast were made using CAD and a CNC machine. The structural safety of the reducer prototype's lower housing (drywell structure) was checked using the ALGOR commercial FEM analysis code, which yielded a von Mises stress of about 123 N/mm2, which is below the yield stress of 250 N/$mm^2$, and a natural frequency of about 650-700 Hz. In addition, the torque transmission efficiency for the advanced prototype was 95.87%, which is about 8% more than that found in a previous study, 88.45%, and the sound level was below 75 dB. Furthermore, no oil leakage or abnormal sound or vibration occurred. Therefore, an optimally designed advanced reducer prototype has been successfully developed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.39-48
• /
• 1990

For shallow circular arches with large dynamic loading, use of linear analysis is no longer considered as practical and accurate. In this study, a method is presented for the dynamic analysis of the shallow circular arches in which geometric nonlinearity is dominant. A program is developed for analysis of the nonlinear dynamic behavior and for evaluation of the critical buckling loads of the shallow circular arches. Geometric nonlinearity is modeled using Lagrangian description of the motion and finite element analysis procedure is used to solve the dynamic equations of motion in which Newmark method is adopted as a time marching scheme. A shallow circular arch subject to radial step load is analyzed and the results are compared with those from other researches to verify the developed program. The critical buckling loads of shallow arches are evaluated using the non-dimensional parameter. Also, the results are compared with those from linear analysis.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.69-81
• /
• 1994

This paper summarizes a dynamic analysis of the shallow circular arches under dynamic loading, considering the geometric nonlinearity. The major emphasis is placed on the development of computer program, which is utilized for the analysis of the nonlinear dynamic behavior and for the evaluation of the critical buckling loads of the shallow circular arches. Geometric nonlinearity is modeled using Lagrangian description of the motion and a finite element analysis procedure is used to solve the dynamic equation of motion. A circular arch subject to normal step load is analyzed and the results are compared with those from other researches to verify the developed program. The critical buckling loads of arches are estimated using the non-dimensional time, load and shape parameters and the results are also compared with those from the linear analysis. It is found that geometric nonlinearity plays and important role in the analysis of shallow arches and the probability of buckling failure is getting higher as arches become shallower.

• The Korean Journal of Rheology
• /
• v.6 no.1
• /
• pp.30-40
• /
• 1994

고분자 물질의 신장점도를 측정하기 위하여 설계된 수렴관을 지나는 시험 유체 M1 에대하여 유한요소방법으로 수치모사를 수행하였다. 구성방정식은 세 개의 이완시간을 가진 적분형 K-BKZ모형을 사용하였다. 신장변형이 지배적이고 변형속도가 매우 큰 흐름에 대하 여 실험적 방법으로 측정이 가능한 범위까지 수치모사를 수행하였다. 두 개의 압력 측정꼬 지 사이의 벽면 압력차에 대하여 압력 신호로 측정한 실험값을 수치모사결과와 비교하였다. 걷보기 전단속도가 매우 큰 1300s-1에 이르는 높은 유속의 전 실험범위에 대하여 안정된 수 치해를 얻을수 있었다. 3$0^{\circ}C$에서는 모든 실험범위의 유속에서 압력차에 대한 수치모사 결과 가 실험값과 잘일치했다. 21$^{\circ}C$에서는 0.1$\times$10-3m3/s보다 낮은 유속범위에서 실험값과 일치하 는 결과를 얻었으나 그보다 높은 유속에서 실험값과 일치하는 결과를 얻었으나 그보다 높은 유속에서 실험값과 다른 경향의 결과를 얻었다. 이것은 낮은 온도 높은 유속 조건에서 M1 유체의 성질이 불안정하고 또한 그러한 조건의 실험에서 발생한 압력 측정꼭지 부근의 기포 들이 정확한 압력측정에 영향을 끼쳤기 때문이다. 수치모사 결과로부터 얻은 압력과 응력분 포로부터 수렴관 유변측정기의 유동특성을 밝힐수 있었다. 이는 실험적 방법을 통해서는 얻 기 어려운 결과들로서 중요한의미를 가진다. 특별한 모양을 갖도록 설계된 수렴관을 통과하 는 M1 유체가 중심부근에서 일정한 신장변형속도로 변형됨을 확인할 수 있었으며 수직응력 은 지수적으로 증가하다가 축소부분을 지난 후 매우 장점도를 얻기 위하여 신장변형속도가 일정한 구역이 두 배로 확장된 수렴관이 수치적으로 다루어졌고 이를 통하여 기존의 수렴관 에서 구한 값보다 큰 신장점도를 얻을 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.349-359
• /
• 2014

Until now, wall-slab plate of steel plate concrete has been constructed by joint. But, the shear plate has problems in the workability as well as structural integrity. This study investigates the behavior and strength of rib stiffened SC wall-slab connection. Seven prototype specimens of wall-slab connections were fabricated and tested. the structural safety of the specimens was confirmed through the monotonic loading test. Based on the experimental observations, this study propose the strength formula of the joint was proposed. To enhance the reliability of the proposed strength formula, analytical verification was performed through inelastic finite element analysis. Effect of parameters, such as, load point, friction coefficient, on the joint strength was examined. The proposed formula yields a conservative value for most cases.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.522-526
• /
• 2007

항공사진을 이용하여 하천의 경년변화를 조사하다 보면, 사주 변동에 따라 하천의 주 흐름이 다양하게 변화되고 있음을 알 수 있다. 이처럼 특정 하천의 지정된 구간에서의 흐름변동은 많은 시간에 걸쳐 이루어진다. 바꾸어 말하면, 짧은 시간 동안 자연하천에서의 주 흐름 변화를 관찰 하기는 일반적으로 매우 어렵다. 본 연구에서는 이틀이라는 짧은 시간 동안에, 하천에서의 주 흐름 변동에 따른 특성변화를 조사하였다. 이러한 조사는 "조정지 댐에서의 수문 조작"이라는 인위적인 방법을 동원함으로서 가능하였다. 모든 조정지 댐에서는 하천 유지를 위한 일정양의 물을 수문을 통하여 방류한다. 대청댐 하류에 있는 조정지 댐에는 폭이 약 10m에 이르는 10개의 수문이 있다. 평상시에는 우안으로부터 5번째에 있는 중앙의 수문을 개방하여 초당 약 18톤의 물을 방류한다. 그러므로 본 연구에서는 방류하고자 하는 지점의 수문높이를 조정하여 일정량을 유지한 채, 수문의 위치를 중앙에서 좌안 그리고 우안의 순으로 변경 하였다. 방류 수문 위치를 변경함에 따라 하천에서의 수리특성을 조사하기 위하여, 흐름이 안정 될 때까지 충분히 기다린 후, 각각의 경우에서의 하류지역을 대상으로 현지관측 및 수치실험을 실시하였다. 조사는, 첫째 지형측량, 유량측정 및 수위변동 등을 포함한 정밀현장조사, 둘째 일반적인 모델에 정밀조사 결과를 적용시킴으로서 얻을 수 있는 가시화 기법 개발 등의 순으로 진행하였다. 수치실험에 사용한 모델은 하천에서의 흐름거동을 2차원적으로 해석하는데 많이 사용되고 있는 상용프로그램인 SMS (Surface-Water Modeling System)의 RMA2 모형이다. 이모형은 RMA (Resource Management Associates, Inc.)에 의해 처음 개발된 2차원 유한요소 모델이며 지배방정식은 z방향을 수심 적분한 2차원 천수방정식으로, x와 y방향에 대한 Navier-Stokes 방정식과 연속 방정식으로 구성된다. 본 연구에서는 현장 조사 시 지배인자 파악의 중요성 및 수치계산을 위한 검증자료의 필요성을 강조하기 위하여, 일반적인 방법으로 수행한 계산 결과 및 다양한 현장 특성을 고려한 계산 결과를 비교 하였다. 그 결과 본 연구는 (1)최신 장비들의 도입 및 검증과 기존 장비의 활용 범위 확대, (2)기존의 상용 프로그램을 이용한 하천 흐름특성의 가시화 실현 등에 의의가 있다고 사료된다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.336-342
• /
• 2005

Stone column or granular compaction pile have been used in widely during the several decades as a technique to reinforce soft cohesive soils and increase bearing capacity, accelerate consolidation settlement of the foundation soil. The bearing capacity of the granular compaction pile is governed mainly by the lateral confining pressure mobilized in the native soft soil to restrain bulging collapse of the granular pile. Therefore, the technique becomes unfeasible in soft, compressible clayey soils that do not provide sufficient lateral confinement. This paper presents the main results of numerical study of granular compaction pile which is partly mixed with lean concrete. 3D finite element analyses are performed with composite reinforced foundations by both granular compaction pile and partly mixed granular compaction pile with lean-mixed concrete.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.59-73
• /
• 2017

Numerical analysis using 3D finite element program (PLAXIS 3D) evaluated the interaction of soil - pile structure under dynamic surface loading. The dynamic p-y curve of the 1-g shaking table experiment by numerical analysis was calculated, and the parametric studies were presented by considering the pile-soil condition, the pile tip condition, and the loading condition. The frequency of 1.4 Hz is almost equal to the natural frequency of the pile - soil system. The p and y values of resonance phenomenon are significantly different from the results of other frequencies. The results can be summarized by a third order polynomial function representing the trend line in the p-y curve. In the case of a single pile, the shape of the dominant curve was found to be an ellipse by mathematical proof. The elliptic equation can be used for the dynamic design or analysis of soil-pile system.