• The KSFM Journal of Fluid Machinery
• /
• v.18 no.3
• /
• pp.53-59
• /
• 2015

Tidal turbine, which is relatively similar to wind turbine in term of operational principle, has become a potential solution for the sustainable development of global energy. This paper introduces author's work on tidal turbine which aims to improve the power efficiency by the adaption of counter-rotating concept. The turbine system is modelled and analyzed using computational simulation commercial code. Compared with other works, the counter-rotating tidal turbine presented here is expected to operate stably with high performance throughout a wide range of tip-speed-ratio. Moreover, the equability of individual performance of each rotor is an advantage.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.87-91
• /
• 2002

Nano-size Alumina powders were prepared by heat treatments which were products obtained using supercritical drying and fluid method. Al-isopropoxide dispersed in ethylene glycol as solvents were used as starting materials. The alumina powders were made by supercritical drying fluid method at Autoclave, those were characterize examined closely by XRD, SEM and TG-DTA. The powders were transformed $\alpha-A12O3$ in new route after heat treatment.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.512-517
• /
• 2011

This study is intended for validation of numerical modeling of a residential building which is made to simulate a phenomenon of fire extension from floor to floor. A common residential building which has the area of 80m2 each floor and some combustibles were chosen for numerical modeling. The combustible models were verified through comparing results of numerical simulations and real fire tests. For computational analysis, the Fire Dynamics Simulator was used with Large Eddy Simulation model for turbulence. Consequently, fire-intensity was well predicted and flash-over of rooms were successfully estimated.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.123-127
• /
• 1998

A computer code has been developed for an analysis of conduction and convection heat transfer on a personal computer. FVM based on unstructured mesh has been employed for triangular and quadrilateral element. All variable of p, u, v, T, k and ${\varepsilon}$ has been defined on a node (not on a center of element). The code possesses the pre-and post-processor for itself to provide user-friendly interface.

• 전기의세계
• /
• v.9
• /
• pp.40-45
• /
• 1962

Laplace 및 Possion의 방정식을 만족하는 전장 및 자장으로 구성된 2차원 및 축대칭 3차원의 potential장을 물의 유동장을 이용한 fluid mapper로 상사해석함에 있어서 세극유로에 있어서의 유체전도율은 매질전도율로 압력은 전위로 유동장의 세기는 전장의 세기로, 유량밀도는 전류밀도로 각각 상사되며 또한 사상형에 있어서는 사상영역외에 존재하는 유선은 등자위선을 의미함을 논문에서 밝혔다. 이 논문에서는 사상형 fluid mapper의 전 유로 및 사상영역에 잇어서의 유체력학적 현상을 이론적으로 규명하여 이를 전기적 등가회로와 상사 해석함으로써 사상형 fluid mapper가 내포하고 있는 제량간의 상호관계를 명백히 하며 몇 가지 대표적인 사례를 들어 사상형 fluid mapper의 응용에 대하여 기술하였다.

• Journal of the KSME
• /
• v.54 no.9
• /
• pp.31-34
• /
• 2014

이 글은 내피세포(endothelial cell)의 생리 병리학적 중요성에 대해 알아보고, 미세혈관기반의 생체 외(in vitro)모델을 소개하며 그 연구 동향에 대해 소개하고자 한다.

• Proceedings of the KAIS Fall Conference
• /
• 2000.04a
• /
• pp.8-8
• /
• 2000

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.55-56
• /
• 2006

냉매 충전량과 이차유체의 입구조건은 $CO_2$용 열펌프시스템의 성능실험에서 중요한 제어변수이다. 따라서, 열펌프사이클의 적용과 난방성능 향상을 위해 제어변수의 특성을 조사하는 것이 필요하다. 본 논문에서, $CO_2$용 열펌프 사이클의 성능 실험은 여러 가지 냉매 충전량에서 이차유체 입구조건에 변화를 주어 수행 되었다. 실험결과, 난방COP는 냉매 충전량이 증가함에 따라 1158g의 냉매 충전량에서 최대가 되었다가 감소하는 경향이 나타나며, 이는 COP가 최대가 되는 냉매충전량이 존재함을 나타낸다. 또한, 난방성능은 가스쿨러내 이차유체의 질량유량의 증가에 따라 증가하였다. 가스냉각기내 2차유체의 입구은도가 $10^{\circ}C$에서 $40^{\circ}C$로 증가하면, 난방용량, 압축일량, 토출압력은 각각 -8.57%, -35.89%, 32.78%로 변화했으며, 증발기 2차유체의 입구 온도가 감소하였을 때 난방COP는 감소하는 경향을 보였다.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.225-242
• /
• 2016

Rock physics serves as a useful tool for seismic reservoir characterization and monitoring by providing quantitative relationships between rock properties and seismic data. Rock physics models can predict effective moduli for reservoirs with different mineral components and pore fluids from well-log data. The distribution of reservoirs and fluids for the entire seismic volume can also be estimated from rock physics models. The first part of this report discusses the Voigt, Reuss, and Hashin-Shtrikman bounds for effective elastic moduli and the Gassmann fluid substitution. The second part reviews various contact models for moderate- to high-porosity sands. In the third part, constant-cement model, known to work well for the sand that gradually loses porosity with deteriorating sorting, was applied to the well-log data from an oil field in the North Sea. Lastly, the rock physics template constructed from the constant-cement model and the results from the prestack inversion of 2D seismic data were combined to predict the lithology and fluid types for the sand reservoir of this oil field.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.4 s.17
• /
• pp.19-25
• /
• 2002

The flow characteristics in a bifurcated duct are investigated experimentally. Physical properties such as mean velocity vectors, mean vorticity, and total pressure distributions are obtained for three different Reynolds numbers (578, 620, 688) using PIV measurements and CFD analysis. Also, two different dividing ducts ($90^{\circ},\;60^{\circ}$) were selected for study. The results of this study would be useful to the engineers designing flow systems for heating, ventilation, air conditioning and waste-water purification plants.