• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.5
• /
• pp.627-634
• /
• 2012

This study includes results of basin test for hydrodynamic performance evaluation with a developed inflatable kayak. Inclining experiment and turning trial experiment of the developed inflatable kayak and an abroad product were carried out in the Ocean engineering Basin. Resistance test was carried out by using downscale model in the circulating water channel. Through method of following performance evaluation, advantage and disadvantage of the developed inflatable kayak were compared with those of the abroad product.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.334-341
• /
• 2015

This study is to evaluate hydrodynamic performance evaluation between three kinds of inflatable kayaks, that is, a frame kayak, a needle knife kayak, and a v-hull kayak. In order to test, inclining and turning trial test are performed in the Ocean Engineering Basin. Also, a resistance test is performed with a reduced scale kayak in the circulating water channel. Consequently, First, the moment arm of a v-hull kayak is the largest with 132.4mm, but turning radius of one was the smallest of them. Second, the resistance of a needle knife kayak is the smallest with 71N, the center of gravity of one was the lowest with 0.128m of them, and then needle knife kayak occurs in a draft overall. Consequently, the v-hull kayak has had the advantages on restoring force and turning performance than others. The needle knife kayak has been more excellent on resistance and center of gravity than others.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.623-630
• /
• 2013

This study was to evaluate hydrodynamic performance evaluation between an abroad product, a developed inflatable kayak and new developed kayaks. In order to test, inclining and turning trial test were carried out in the Ocean engineering Basin. Also, resistance test was carried out using a reduced scale model in the circulating water channel. In conclusion, stability of KONA was evaluated was the most greatest, the coefficient of resistance and center of gravity from RD-FK-12 were considerable, and turning performance of RD-FK-11 was greater than this of KONA and RD-FK-12.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.72-80
• /
• 2018

With the ever increasing advances in computers and their computing power, computational fluid dynamics(CFD) has become an essential engineering tool in the design and analysis of engineering applications. Accordingly, many universities have developed and implemented a course on CFD for undergraduate students. On the other hand, many professors have used industrial examples supplied by computational analysis software companies as CFD examples. This makes many students think of CFD as difficult and confusing. This paper presents a simple CFD example used in the department of mechanical design engineering of Kangwon National University and shows its effectiveness. Most students answered that a simple CFD example is more comprehensive than an industrial example. Therefore, it is necessary to develop simple computational analysis problems in the engineering education field.

• Tunnel and Underground Space
• /
• v.29 no.1
• /
• pp.12-29
• /
• 2019

Permeability and its change due to a fluid injection in jointed rock mass is an important factor to be well identified for a safe and successful implementation of Carbon Capture and Sequestration (CCS), Enhanced Geothermal System (EGS) and Enhanced Oil Recovery (EOR) projects which may accompany injection-induced hydromechanical deformation of the rock mass. In this technical report, we first reviewed important issues in evaluating initial permeability using borehole hydraulic tests and numierical approaches for understanding coupled hydromechanical properties of rock mass. Recent SIMFIP testing device to measure these hydromechanical properties directly through in-situ borehole experiments was also reviewed. The technical significance and usefulness of the device for further applications was discussed as well.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.556-561
• /
• 2014

본 연구에서는 유조선 공법의 유체역학적 타당성을 검증하고자 한다. EDISON_CFD를 이용하여 간단화한 서산 간월호의 간척 이전 모습을 모델링하였다. 방조제 모델에서의 난류 유동을 방조제 사이에서의 유속과 사이에서 받는 압력의 분포를 통해 유조선 공법이 실제로 방조제 건설에 도움이 될 수 있는지에 대해 평가했다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1175-1183
• /
• 2013

Even if some CFD software developers and its users think that a state-of-the-art CFD software can be used to reasonably solve at least single-phase nuclear reactor safety problems, there remain limitations and uncertainties in the calculation result. From a regulatory perspective, the Korea Institute of Nuclear Safety (KINS) is presently conducting the performance assessment of commercial CFD software for nuclear reactor safety problems. In this study, to examine the prediction performance of commercial CFD software with the porous model in the analysis of the scale-down APR (Advanced Power Reactor Plus) internal flow, a simulation was conducted with the on-board numerical models in ANSYS CFX R.14 and FLUENT R.14. It was concluded that depending on the CFD software, the internal flow distribution of the scale-down APR was locally somewhat different. Although there was a limitation in estimating the prediction performance of the commercial CFD software owing to the limited amount of measured data, CFX R.14 showed more reasonable prediction results in comparison with FLUENT R.14. Meanwhile, owing to the difference in discretization methodology, FLUENT R.14 required more computational memory than CFX R.14 for the same grid system. Therefore, the CFD software suitable to the available computational resource should be selected for massively parallel computations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.100-102
• /
• 2023

항로추종성능은 자율운항선박(MASS)의 중요한 자율제어기능 중 하나이다. 이는 선박의 안전성을 보장하기 위해 중요하며, 자율운항선박의 설계 단계에서 사전 평가가 필수적이다. 본 연구는 자율운항선박의 항로추종성능 평가를 위한 전산유체역학(CFD) 모델과 LOS 알고리즘 연계 방안을 제안한다. 먼저, 자율운항선박의 정수 중 거리 이탈 편차를 이용한 항로 추종 성능 평가 모델 개발에 관하여 기술했다. 먼저, 항로 추종을 수행하는 선박 주변의 난류 흐름은 비압축성 뉴턴 유체의 가정하에 비정상 RANS(Reynolds Averaged Navier-Stokes) 법을 이용하여 수치적으로 계산되었다. 중첩격자계법을 CFD 모델에 적용함으로써 거리 이탈 편차를 이용하는 LOS(Line-of-Sight) 가이던스 알고리즘에 의한 타의 회전 및 이에 따른 선체의 6 자유도 움직임을 CFD 환경에서 구현하였다. 개발된 자유 항주 선박 CFD 모델을 이용하여 항로 추종 시뮬레이션 평가 결과, 설정된 항로에서 선박의 정수 중 항로 추종 제어는 파도, 조류, 및 바람과 같은 외부 교란의 부재로 LOS 알고리즘에 의한 우현/좌현 측 변침뿐만 아니라 직진 경로의 추종도 성공적으로 수행됨을 확인하였다. 선체, 프로펠러, 타의 복잡한 상호작용을 정도 높게 해석할 수 있는 자유 항주 선박 CFD 모델과 LOS 알고리즘의 결합은 자율운항선박의 항로 추종 성능 평가를 정량적으로 평가하는 데 기여할 것으로 기대된다.

• Journal of Navigation and Port Research
• /
• v.47 no.1
• /
• pp.10-17
• /
• 2023

A series of studies on the development of autonomous surface ships have been promoted in domestic and foreign countries. One of the main technologies for the development of autonomous ships is path-following control, which is closely related to securing the safety of ships at sea. In this regard, the path-following performance of an autonomous ship should be first evaluated at the design stage. The main aim of this study was to develop a visual and quantitative evaluation method for the path-following control performance of an autonomous ship at the design stage. This evaluation technique was developed using a computational fluid dynamics (CFD)-based path-following control model together with a line-of-sight (LOS) guidance algorithm. CFD software was utilized to visualize waves around the ship, performing path-following control for visual evaluation. In addition, a quantitative evaluation was carried out using the difference between the desired and estimated yaw angles, as well as the distance difference between the planned and estimated trajectories. The results demonstrated that the ship experienced large deviations from the planned path near the waypoints while changing its course. It was also found that the fluid phenomena around the ship could be easily identified by visualizing the flow generated by the ship. It is expected that the evaluation method proposed in this study will contribute to the visual and quantitative evaluation of the path-following performance of autonomous ships at the design stage.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.335-358
• /
• 2020

We present a numerical model to simulate coupled hydro-mechanical behavior of fault using TOUGH-FLAC simulator. This study aims to develop a numerical method to estimate fluid injection-induced fault reactivation in low permeability rock and to access the relevant hydro-mechanical stability in rock as part of DECOVALEX-2019 Task B. A coupled fluid flow and mechanical interface model to explicitly represent a fault was suggested and validated from the applications to benchmark simulations and the field experiment at Mont Terri underground laboratory in Switzerland. The pressure build-up, hydraulic aperture evolution, displacement, and stress responses matched those obtained at the site, which indicates the capability of the model to appropriately capture the hydro-mechanical processes in rock fault.