• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.95-95
• /
• 2017

백미의 품질특성 중 탁도는 쌀을 씻는 과정에서 발생하는 쌀뜨물의 탁한 정도이며, 쌀뜨물은 다량의 유기물을 포함하여 하천으로 유입 될 경우 수질오염의 주요 원인이 되고 있다(Cho et al., 2017). 따라서 본 연구에서는 백미 가공공정 중 백미의 품질 및 탁도 특성을 분석하기 위하여 백미 가공 시스템의 1, 2단 주축 회전속도에 따른 적정 가공조건을 구명하고자 하였다. 공시재료는 전북 김제시에서 생산된 2015년산 신동진 백미를 사용하였고, 가공 중 백미의 품질 및 탁도 특성은 1, 2단 주축 회전속도에 따라 800, 900, 1,000 및 1,100 rpm의 네 가지 조건에서 측정하였다. 가공 후 싸라기율은 주축 회전속도 1,000 rpm 조건에서 0.46%로 비교적 낮았으며, 1,100 rpm 조건의 경우 0.61%로 약간 높은 경향을 보였다. 주축 회전속도에 따른 가공 전후 백미의 탁도 감소는 주축 회전속도가 빠를수록 높은 경향을 보였으며, 주축 회전속도 1,100 rpm 조건에서 19.57 ppm 정도 탁도가 감소하는 것으로 나타났다. 주축 회전속도에 따른 백미 가공 중 에너지 소비량은 주축 회전속도가 빠를수록 증가하였으나, 주축 회전속도 800, 900 및 1,000 rpm 조건의 경우 3.41~4.25 kWh로 큰 차이는 보이지 않았다.

• Journal of Environmental Science International
• /
• v.15 no.2
• /
• pp.121-131
• /
• 2006

Atmospheric bulk (wet and dry) samples were monthly collected in Masan and Heangam areas of Korea, to assess the deposition flux and seasonal variation of polycyclic aromatic hydrocarbons (PAHs). Deposition fluxes of PAHs in bulk samples were determined using gas chromatography coupled to mass spectrometer detector (GC/MSD). Particle deposition fluxes from Masan and Haengam areas varied from 13 to $87\;g/m^2/year$ and from 5 to $52\;g/m^2/year$, respectively. PAHs deposition fluxes in atmospheric bulk samples in Masan and Haengam areas ranged from 135 to $464\;{\mu}g/m^2/year$ and from 62.2 to $194\;{\mu}g/m^2/year$, respectively. Atmospheric deposition fluxes of particles and PAHs in this study were comparable to or slightly lower values than those from different locations in Korea and other countries. PAHs profiles of atmospheric deposition bulk samples showed slightly different from two sampling areas, however the predominant species of PAHs were similar. Indeno (1,2,3-c,d)pyrene, benzo(g,h,i)perylene, phenanthrene compounds were the most detected PAHs in deposition bulk samples. Carcinogenic PAHs occupied the contribution of approximately $30-40\%$ of the total PAHs deposition fluxes. The non-metric multi-dimensional scaling (MDS) was used, to assess the differentiation of PAHs source between two sampling areas. The result suggests that PAHs contamination sources were different according to the location and season surveyed. There was no an apparent relationship between the PAHs deposition flux against temperature and rainfall amount, even though summer season with the highest temperature and the largest amount of precipitation showed the lowest PAHs deposition flux. Benzo(e)pyrene/benzo(a)pyrene ratio indicated that the photo-degradation process was one of important factors to the seasonal variation of PAHs with the lower deposition fluxes.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.6
• /
• pp.775-781
• /
• 1997

Although reoxygenation is the best way to salvage hypoxic tissues, reduced oxygen species (ROS) generated during reoxygenation are blown to cause further tissue injuries and the induction of heat shock proteins (HSPs). The present study was undertaken to determine any causal relationship between the severity of hypoxia and the opposite outcomes, either beneficial or detrimental, of the subsequent reoxygenation by measuring the HSP72. To this aim, one group (6 male cats, $2.5{\sim}3.5\;kg$) was subjected to a 5-min episode of hypoventilation (H, ventilation rate: 5/min) for the induction of slight hypoxia and the other group (6 male cats, $2.4{\sim}3.7\;kg$) was subjected to a 5-min episode of apnea (A) for severe hypoxia. Each 3 animals from both groups received a 10-min episode of ventilation with $(95%\;O_2\;(0)$, whereas the remainder did not. After these procedures, all animals were allowed to be ventilated within physiological range for 1, 4, or 8 hours (1H, 1HO, 4H, 4HO, 8H, 8HO, 1A, 1AO, 4A, 4AO, 8A and 8AO groups). Control animals did not receive any manipulation. The arterial blood $pCO_2$ was significantly higher just after apnea than hypoventilation, while $pCO_2$ and pH were significantly lower just after apnea than hypoventilation. Western blot analysis revealed that the magnitude of HSP72 synthesis is larger in 1H, 4H and 8H groups than in 1HO, 4H and 8HO groups, respectively. In contrast, 1AO, 4AO and 8AO groups more induced HSP72 than 1A, 4A and 8A groups, respectively. These results suggest that the reoxygenation is beneficial after slight hypoxia but detrimental after severe hypoxia.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.247-253
• /
• 2003

In this study, a numerical analysis of the deposition of gallium arsenide from TMGa and arsine in a horizontal MOCVD reactor is performed to investigate the effect of inlet diffuser shape of reactor on the flow and deposition characteristics. The effects of two geometric parameters (diffuser angle, diffuser shape) on the growth rate, growth rate uniformity, flow uniformity and pressure loss are presented. As a results, it is found that the optimum linear diffuser angle is in the range of $50^{\circ}$∼$55^{\circ}$ and parabolic diffuser in the range of $40^{\circ}$∼$45^{\circ}$ from the viewpoint of growth rate uniformity, flow uniformity and average growth rate. It is also found that variation of diffuser angle has greater impact on growth rate uniformity than average growth rate particularly in parabolic diffuser.

• Convergence Security Journal
• /
• v.11 no.4
• /
• pp.37-42
• /
• 2011

In this paper, the design methodology of information security is analyzed to implement the ubiquitous city (u-City). The definition, concept, and main u-services of u-City are presented. The main components, functio ns and offering services of u-City management center are presented, and the laws and network security requirements related to protect the personal information in collecting, processing, and exchanging are also analyzed. Three step security levels of Router/Switch, Firewall/VPN, and IPS are applied where main functions of in terception of abnormal packets($1^{st}$ level), access control for each service($2^{nd}$ level), and real-time network monitoring($3^{rd}$ level) are performed. Finally, application cases are presented to validate the security of personal information in providing the u-City services.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.619-625
• /
• 2015

Swirl injectors are widely used for Liquid Rocket Engine(LRE) as fuel injection system and following researches are also being carried out throughout the world. Especially, solving combustion instability problem is essential for every type of LREs. In this study, cold test was carried out for open type swirl injector as a fundamental research to solve combustion instability problem. Pressure fluctuation was applied to the inlet flow coming into the injector and the following response characteristics were observed. The effect of swirl chamber geometry was also studied by changing both swirl chamber length and diameter.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.303-308
• /
• 1998

A bacterial strain which utilizes phenol under denitrifying condition was isolated from the industrial waste water collected from the Chong-ju Industrial Complex. The strain was identified as Pseudomonas species from the morphological, physiological, and biochemical characteristics and designated as HL100. The strain can utilize phenol as the sole source of carbon and energy when nitrate is provided as the terminal electron acceptor. The isolated strain completely degraded 3 mM of phenol within 110 hour with concomitant reduction of nitrate to nitrite. The observed maximum doubling time was 20 hours. Under appropriate condition, complete reduction of nitrate to atmospheric N$_2$ was observed indicating that the isolated strain could perform complete steps of denitrification. The strain showed optimal growth at pH 7.0 and temperature of 37$^{\circ}C$ under denitrifying phenol-degrading condition. The strain can also utilize toluene as the sole carbon and energy source under the same growth condition. However, no growth was detected on xylene and benzene.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.2
• /
• pp.92-97
• /
• 2008

Salt wedge into the river from the sea or fresh water flume (fresh wedge) in the ocean from the sea has density current characteristics. However, when temperature and salinity simultaneously determine the density of wedges, one of salinity and temperature can distributed in the reversed profiles against gravity, even though the density profile is stable. In this case, the double diffusive process is critical in determining mixing rate. The present work studies relative contribution of shear driven mechanical mixing component and double diffusive layering process, when warm salty denser water is introduced into the cold fresh lighter water column. Laboratory experiment releases warm salty denser water into cold fresh lighter water controlling discharge amount to achieve the steady state of density current. When longitudinal density rate becomes 15, the released amount ratio of salt and heat changes sharply and in the releasing point, vigorous mixing occurs with increase of discharged amount due to double diffusion. Double diffusion distabilizes gravitational stability and enhances the mixing rate up to $6{\times}10$ times at the lower density ratio comparing to the higher density ratio.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.38-49
• /
• 2012

In this study, we analyze statistical characteristics of influent water quality in Daejeon waste water treatment plant and apply a stochastic model for data generation. In the analysis, the influent water quality data from year 2003 to 2008, except for year 2006, are used. Among water quality variables, we find strong correlations between BOD and T-N; T-N and T-P; BOD and T-P; $COD_{Mn}$ and T-P; and BOD and $COD_{Mn}$. We also find that different water quality variables follow different theoretical probability distribution functions, which also depends on whether the seasonal cycle is removed. Finally, we generate the influent water quality data using the multi-season 1st Markov model (Thomas-Fiering model). With model parameters calibrated for the period 2003~2005, the generated data for 2007~2008 are well compared with observed data showing good agreement in general. BOD and T-N are underestimated by the stochastic model. This is mainly due to the statistical difference in observed data itself between two periods of 2003~2005 and 2007~2008. Therefore, we expect the stochastic model can be applied with more confidence in the case that the data follows stationary pattern.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.327-332
• /
• 1996

In this study, the effects of $WSi_x$, thickness and fluorine concentration in tungsten polycide gate structure on gate oxide were investigated. As $WSi_x$, thickness increases, gate oxide thickness increases with fluorine incorporation in gate oxide, and time-to-breakdown($T_{BD,50%}$) of oxide decreases. The stress change with $WSi_x$ thickness was also examined. But it is understood that the dominant factor to degrade gate oxide properties is not the stress but the fluorine, incorporated during $WSi_x$ deposition, diffused into $WSiO_2$ after heat treatment. In order to understand the effect of fluorine diffusion into oxidem fluorine ion implanted gates were compared. The thickness variation and $T_{BD,50%}$ of gate oxide is saturated over 600 $\AA$ thickness of $WSi_x$. The TEM and SIMS studies show the microstructure less than 600 $\AA$ thickness is dense and flat in surface. However, over 600$\AA$, the microstructure of $WSi_x$ is divided into two parts: upper porous phase with rugged surface and lower dense phase with smmoth interface. And this upper phase is transformed into oxygen rich crystalline phase after annealing, and the fluorine is captured in this layer. Therefore, the fluorine diffusion into the gate oxide is saturated.