• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.709-718
• /
• 2022

We evaluated the effect of high-density aluminum, titanium, and steel metal inserts on computed tomography (CT) numbers and radiation treatment plans for Tomotherapy. CT images were obtained using a cylindrical TomoPhantom comprising cylindrical rods of various densities and metal inserts. Three CT image sets were evaluated for image quality as the mean CT number and standard deviation. Dose evaluation also performed. The reference values did not significantly differ between the CT image sets with the corrected metal inserts. The higher-density material exhibited the largest difference in the mean CT number and standard deviation. The conformity index at Iterative-Metal Artifact Reduction (iMAR) was approximately 20% better than that of non-iMAR. No significant target or organ at risk dose difference was observed between non-iMAR and iMAR. Therefore, iMAR is helpful for target or organ at risk delineation and for reducing uncertainty for three-dimensional conformal radiation therapy in Tomotherapy.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.331-346
• /
• 2010

This study was carried out to leach valuable metals from galena using indigenous bacteria with no optimum pH conditions at room temperature. Even in these conditions, the rod-shaped indigenous bacteria, ranging from $0.4{\times}0.2{\mu}m$ to $0.5{\times}1.7{\mu}m$, were attached to the surface of the galena. For the 19 days of the bioleaching experiment, the content of Ph, Fe, Zn ions was found to be 347, 222 and 1.7 times higher than that of the control leaching agent, respectively. Numerous hexagonal column crystals were observed on the surface of galena. Those crystals may be formed from the biooxidation of galena by the indigenous bacteria. XRD analysis showed the peaks of anglesite observed in the bioleached galena. It is expected that more valuable elements can be leached out of the galena, if the bacteria is used under optimum pH and temperature conditions in future bioleaching experiments.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2013

Purpose: The purpose is to perform objective evaluation for rotator cuff using ultrasonography and validate factors influencing cuff integrity as well as efficacy of follow-up ultrasonography after unreamed antegrade intramedullary nailing for humerus fracture. Materials and Methods: Seventeen patients with an average age of $55.7{\pm}18.6$ years underwent antegrade intramedullary nailing for humerus fracture and follow-up ultrasonography of shoulder joint. Mean follow-up period was $43.5{\pm}32.2$ months. Intraoperative evaluation for preoperative cuff tear was performed, of which four cuffs were repaired by single row repair technique. Clinical evaluation included visual analogue scale (VAS), range of motion, Korean Shoulder Scoring System (KSS) and American Shoulder and Elbow Society (ASES) score. Ultrasonographic evaluation was performed on cuff integrity and protrusion of proximal nail tip as well. Radiographic evaluation included time to union, protrusion of proximal nail tip and migration of proximal interlocking screw which could affect shoulder joint function. Results: Mean VAS at last follow-up was $1.65{\pm}1.84$ points. Range of motion showed forward flexion of $137.0{\pm}33.5^{\circ}$, external rotation of $43.5{\pm}12.7^{\circ}$ and internal rotation of $16.4{\pm}2.0^{\circ}$ while KSS score and ASES score were $79.6{\pm}20.7$ and $83.7{\pm}17.0$ points, respectively. Bone union was demonstrated in all cases and average time to union was $3.4{\pm}1.3$ months. Migration of proximal interlocking screw was shown in 6 cases (35%). On ultrasonographic evaluation, there were normal in 8 (47%), weaving in 4 (24%), partial tear in 5 cases (29%), but no complete tear. Protrusion of proximal nail tip was demonstrated in 8 cases (47%) on plain radiographs whereas in 11 cases (65%) on ultrasonography and was associated with increasing age (p=0.038). Ultrasonographic weaving and partial tear was associated with protrusion of proximal nail tip (p=006), but not with repair of preoperative tear (p>0.05). Conclusion: Because weaving and partial tear on ultrasonography originated from protrusion of proximal nail tip, careful insertion of nail and meticulous repair of cuff during operation lead to stable fixation with satisfactory recovery of shoulder function follow-up ultrasonography can be a useful tool for evaluating protrusion of nail tip and rotator cuff tear, of which diagnosis is difficult on plain X-ray after antegrade intramedullary nailing for humerus fracture.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.207-222
• /
• 2014

In order to recover the metallic copper powder from the mine-waste rock, heap bioleaching, Fe removal and electrowinning experiments were carried out. The results of heap leaching with the mine-waste rock sample containing 0.034% Cu showed that, the leaching rate of Cu were 61% and 62% in the bacteria leaching and sulfuric acid leaching solution, respectively. Sodium hydroxide (NaOH), hydrogen peroxide ($H_2O_2$) and calcium hydroxide ($Ca(OH)_2$) were applied to effectively remov Fe from the heap leaching solution, and then $H_2O_2$ was selected for the most effective removing Fe agent. In order to prepare the electrolytic solution, $H_2O_2$ were again treated in the heap leaching, and Fe removal rates were 99% and 60%, whereas Cu removal rates were 5% and 7% in the bacteria and sulfuric acid leaching solutions, respectively. After electrowinning was examined in these leaching solution, the recovery rates of Cu were obtained 98% in bacteria and obtained 76% in the sulfuric leaching solution. The dendritic form of metallic copper powder was recovered in both leaching solutions.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.3-11
• /
• 2002

Recently, waste printed circuit board (PCB) has significantly increased in its amount due to the rapid development of electronic industries. Since several kinds of noxious materials and also valuable metals are contained in it, the waste PCB is in an urgent need of recycling for the dual purposes for the prevention of environmental pollution and recovery of valuable resources. Also, the catalyst which equipped in the exhaust pipes of automobiles to reduce emission of air pollutants contains precious met-als so that their recovery from the waste auto-catalysts is required. In this study, the recovery of valuable metals from waste PCB and auto-catalyst by arc furnace melting process has been investigated, which is known to be very stable and suitable f3r less production of pollutants due to its high operating temperature. The effect of the kind of flux on the recovery of precious metals was examined by using quicklime, converter slag, and copper slag as the flux. In addition, the influence of direct and alternating current and the applying direction of direct current has been investigated. It was observed that using converter or copper slag as a flux was more desirable for a higher efficiency in the precious metal recovery compared with quicklime. For the effect of current, application of direct current taking the bottom as a negative pole generally showed a better efficiency for the extraction of valuable metals from waste PCB, which was also observed for the case of waste auto-catalyst. The average recovery of precious metals from both wastes by arc furnace melting process was very high, which was up to in the range of 95～97%.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.227-230
• /
• 2002

The Loose Part Monitoring System(LPMS) has been designed to detect, locate and evaluate detached or loosened parts and foreign objects in the reactor coolant system. In this paper, at first, we presents an application of the back propagation neural network. At the preprocessing step, the moving window average filter is adopted to reject the low frequency background noise components. And then, extracting the acoustic signature such as Starting point of impact signal, Rising time, Half period, and Global time, they are used as the inputs to neural network. Secondly, we applied the neural network algorithm to LPMS in order to estimate the mass of loose parts. We trained the impact test data of YGN3 using the backpropagation method. The input parameter for training is Rising Time, Half Period, Maximum amplitude. The result showed that the neural network would be applied to LPMS. Also, applying the neural network to the Practical false alarm data during startup and impact test signal at nuclear power Plant, the false alarms are reduced effectively. 1.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.3
• /
• pp.155-158
• /
• 2014

Phytoextraction is a technique that uses plants to remediate metal-contaminated soils. However, this technique cannot be applied in highly metal-contaminated areas, as plants cannot normally grow under such conditions. Therefore, this study investigated the introduction of various biodegradable chelating agents to increase the bioavailability of metals in highly metal-contaminated areas. Mercury (Hg) was selected as the target metal, while cysteine (Cys), histidine (His), malate, succinate, oxalate, citrate, and ethylenediamine (EDA) were used as biodegradable chelating agents. Plants were grown on agar media containing various chelating agents and Hg to analyze the effect on plant root growth. Cys and EDA were both found to diminish the inhibitory effect of Hg on plant root growth, whereas His, citrate, and ethylenediamine tetraacetic acid (EDTA) did not show any significant effects, and malate, succinate, and oxalate even promoted the inhibitory effect of Hg on plant root growth. Thus, Cys and EDA would seem to be promising biodegradable chelating agents for highly Hg-contaminated areas.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.59-63
• /
• 2005

A simulation method combined with the simulation program with integrated circuit emphasis (SPICE) and the technology computer-aided design (TCAD) has been proposed to estimate the electrical characteristics of the metal-ferroelectric-semiconductor field effect transistor (MFS/MFISFET). The complex behavior of the ferroelectric property was analyzed and surface potential of the channel region in the MFS gate structure was calculated with the numerical TCAD method. Since the calculated surface potential is equivalent with the surface potential obtained with the SPICE model of the conventional MOSFET, we can obtain the current-voltage characteristics of MFS/MFISFET corresponding to the applied gate bias. Therefore, the proposed method will be very useful for the design of the integrated circuits with MFS/MFISFET memory cell devices.

• Clean Technology
• /
• v.13 no.3
• /
• pp.228-234
• /
• 2007

In this study, the productivity and environmental effects of laser aided direct metal deposition (LADMD) process which is one of promising rapid manufacturing technology is evaluated. The production time predicted using PowerMill shows that the productivity of LADMD is superior to that of conventional milling process. Though LADMD is known as an environment-friendly technology, it has a disadvantage to utilize much energy to generate laser beam. Considering both productivity and environmental effects, LADMD is expected to be widely used in remanufacturing industry.

• Journal of Hydrogen and New Energy
• /
• v.7 no.1
• /
• pp.3-9
• /
• 1996

Hydrogen generation by electrical discharge through metal/water system is a viable method for on-demand applications. But its success depends on high energy efficiency defined as the ratio of the amount of consumed metal for a complete reaction with water to the electrical energy input. To improve the energy efficiency the electrical discharge has to sustain the hydrogen generation reaction with a minimal energy dissipation. Some experimental results on the discharge voltage-current profiles are reported and discussed.