• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.10a
• /
• pp.19-28
• /
• 1996

본 논문에서는 유연 연결부를 갖고 있는 이차원 구조물의 비탄성 좌굴해석을 연구하였다. 본 해석을 통하여 구조물의 기하학적, 및 재료적 비선형 뿐만 아니라 유연 연결부의 비선형 효과가 구조물의 거동과 강도에 미치는 영향을 예측할 수 있다. 본 해석 결과는 실험 결과와 비교하였으며 예제해석도 수행하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.109-109
• /
• 2004

구조물에 있어서 진동은 소음을 유발하며 구조물을 불안정하게 만드는 요인이 된다. 특히, 저주파 진동은 구조물에 미치는 영향이 크므로, 유연구조물의 저주파 진동모드들을 우선적으로 제어할 필요가 있다. 본 논문에서는 압전세라믹을 작동기로, 압전필름을 감지기로 사용하였고, 능동 제어 알고리즘의 하나인 적응형 디지털 PPF(Positive Position Feedback) 제어기를 구성하여 유연 외팔 평판과 열린 박스 구조물에서 저주파 진동을 감소시켰다.(중략)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.400-408
• /
• 2009

This work presents experimental results on vibration control of flexible structures using the squeeze mode electrorheological(ER) mount. An appropriate size of the squeeze mode ER mount is devised and its field-dependent damping force characteristics are experimentally evaluated. The ER mount is then applied to two different flexible structures : beam structure and frame structure. An optimal controller associated with displacement and acceleration signals is designed to suppress the imposed vibration and experimentally realized using the microprocessor. Vibration control responses of the flexible structures such as acceleration are evaluated in time and frequency domains.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.57-57
• /
• 2014

유연 폴리머 기판 상에 광 투과 특성을 기존 전극 대비 혁신적으로 개선한 2차원, 3차원 산화물 나노 구조 전극을 개발하였다. 본 유연투명전극의 높은 광 투과 특성으로 인한 유연소자의 성능 향상을 유연 유기 태양전지 제조를 통해 입증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.24-31
• /
• 2006

In this paper, mechanical behavior of unidirectional composites with flexible matrix was predicted by geometrical non-linear finite element analysis. Two typical idealized unit cells of square and hexagonal fiber arrays were modeled and these were subjected to different loadings. The stress-strain behavior of composites was predicted from which the effective properties were calculated. The hyperelasticity of polyurethane matrix was considered using Mooney-Rivlin model. In result, the stress-strain behavior of flexible composites shows non-linearity, especially it is remarkable under transverse normal and shear loading conditions. In this cases, there are great difference between square and hexagonal fiber array models.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.364-380
• /
• 2006

This paper presents a procedure for designing command to maneuver flexible structure with very little residual vibration, even in the presence of modeling errors. For the open loop maneuver, the various shaped profiles using multiple step inputs delayed in time are considered for robustness and compared with the responses of rigid body and flexible body in virtue of simulations and experiments. Input shaping generates vibration-reducing shaped commands through convolution of an impulse sequence with the desired command. A flexible model with a cylindrical hub and four symmetric appendages is considered to examine the responses to real plant, and to illustrate the effectiveness of the proposed shapers. The appendages are long and flexible, leading to low frequency vibration under any control action. It is shown by a series of simulation that a properly designed feedback controller with input shaper performs well, as compared with open loop controller with input shaper. The control objective is to achieve a fast settling time of residual vibration to flexible structure and robustness (insensitivity)to plant uncertainty, to eliminate residual vibration.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.25-31
• /
• 2004

This paper describes a new vibration-suppression technique for flexible cantilevered structures by using a pipe containing an internal flow. The stability and dynamic response are analyzed based on the finite element method. The flutter limit and optimum stabilizing fluid velocity are determined in root locus diagrams. The impulse responses of the system are studied by the mode superposition method to observe the damping rate of the motion. The stabilizing effect of an internal flow is demonstrated by impulse responses of the structures with and without an material damping. It is found that the response of the pipe with flow of liquid has a larger effect of, stabilizing than that with flow of gas.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.865-874
• /
• 2016

This research is concerned with the experimental investigation on the vibrations of a flexible two-link system for verifying the theoretical result from simplified equations of motion for the system along with the kinematical synthesis are proposed to simulate the elastic vibrations of a previous study. The structure consists of flexible two-links; The link 2 is attached to the end of the link 1. The link 1 is made of composite fiber reinforced polymer and the link 2 is an aluminum beam. In order to verify the theoretical result, a flexible two-link system operated by the AC and RC servo motors was constructed. Experimental results show that the dynamic modeling approach and the kinematical synthesis proposed in this paper are effective.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.2
• /
• pp.222-231
• /
• 1985

유연한 구조물의 진동은 이론적으로는 무한개의 진동모우드를 포함하고 있기 때문에 진동을 감 소시키기 위한 제어시스탬을 설계할 때에는 유한개의 진동모우드로 진동하고 있다는 가정하에서 제어기를 설계하는 것이 보통이다. 그러나 이러한 방법으로 구조물 진동을 제어할 때에는 설계 시에 제외된 잔류 진동모우드에 의해서 오히려 구조물의 진동이 더욱 심하게 되어 안정성을 해 치는 결과를 낳는 수가 있다. 본 연구에서는 잔류 모우드에 의한 불안정성을 제거하기 위해 최 적제어 이론을 바탕으로 제어이론을 개발하였다. 구조물 진동이 안정화되기 위한 필요조건을 제시하였고 외팔보 진동의 예를 시뮬레이션하여 제어이론을 증명하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.377-386
• /
• 2003

The proposed simplified MDOF model is applied to a half-scale single-story reinforced masonry test building with a single diagonally-sheathed diaphragm. Comparisons of analytical studies to experimental tests can be valuable for understanding the seismic response of these types of buildings and for determining the qualities and limitations of the simplified models. A model calibration process is performed in this paper to determine the required structural properties based on the elastic and inelastic test responses for test building. This approach is necessary since established methods to determine the in-plane and out-of-plane stiffness, strength, and hysteresis do not exist.